MS & 97B - Series
ACR11 0601
Introduction
Page Contents
1
2-3
4
5
6
7-18
19-25
26-29
30-33
34
35
Introduction
Connector styles
General description
Electrical data
Insert orientations
Insert arrangements
Shell types
Back accessories
Other accessories
MS/97B Series
Ordering MS/97B series
connectors
Amphenol MS and 97B series are two series of thread & Bayonet-
coupled connectors designed to meet the operating requirements
of MIL-C-5015. Available in a variety of styles and classes, these
connectors are primarily used in a range of military and industrial
applications where specific degrees of environmental protection
are required.
Although MS series have identical insert arrangements and other
similar component parts, the two series differ in that Amphenol MS
series of connectors are also qualified to meet the operating
requirements of Defence Standard Joint Services Specification
JSS50812, issued by the Electronics Components
Standardization Organisation (LCSO).
Amphenol 97B connectors feature a quick mating bayonet
coupling with an audible full mating feature. This series uses the
same MIL-C-5015 insert patterns and are used in high shock
and vibration environments encountered in commercial,
geophysical, aerospace, ground support and shipboard
applications.
AMPHENOL 1
MS And 97B Series
Class F
Class A=R
Class A
Class E and F
Class R
cable
clamp
back
shell
MS-3102
MS-4102
MS-3101
MS-4101
MS-3100
MS-4100
MS-3106
MS-4106
MS-3108
MS-4108
grommet
sleeve
grommet
Connector Styles - MS
AMPHENOL 2
MS And 97B Series
Class F
Class A=R
Class A
Class R
cable
clamp
back
shell
grommet
sleeve
grommet
Class F
3
97B - 3108
97B - 4108
97B - 3106
97B - 4106
97B - 3102
97B - 4102
97B - 3100
97B - 4100
97B - 3101
97B - 4101
97B - 3103
97B - 4103
Connector Styles - 97B
MS And 97B Series
AMPHENOL
4
General Description
These electrical connectors are designated MS
because the interchangeability and operating
characteristics are determined by U.S. Military
Specifications. These specifications are revised
from time to time to incorporate performance
requirements dictated by design advances and
more stringent requirements of allied equipment.
The several designations of MS and 97B
connectors meet different requirements of MIL-
C-5015. These designations and general
descriptions are as follows :
Shell
Shell constructions include solid back shell (A)
and environmental resistant (E, F & R).
Environmental resistant connectors provide a
moisture barrier and assure a positive seal. Shell
styles consist of wall type receptacles (3100),
cable receptacles (3101), box receptacles
(3102), straight plugs (3106) and angle plugs
(3108). Shell hardware is manufactured from
aluminium alloy and cadmium plated with olive
drab chromate finish. This finish has excellent
conductivity; it is non-reflecting and corrosion
resistant. Black anodised finish and cadmium-
free zinc plating with olive drab chromate finish
are also available. For details, contact factory.
Contacts
Pin and socket contacts are of brass and
generally silver plated. Gold plating is also
available. For details contact factory. These
contacts are available for solder or crimp
termination. Special arrangements of contacts
for pre-mating and pre-earth are also available.
Inserts and grommet
Synthetic inserts and grommet manufactured
according to MIL-R-3065, offer high dielectric
strength and are resistant to oils, gasoline and low
temperature. DAP is dimensionally stable, has high
arc resistance and high insulation resistance under
both humidity and thermal stress.
General description
Plugs are available in A, F and R types. Receptacles
are available in A, E, F and R types.
A Solid back shell
Intended for general service usage to provide
convenient means of connecting and disconnecting
electrical circuits in industrial and military
applications.
Environmental resisting
Intended for use where the connector will be subject
to heavy condensation and rapid changes in
temperature or pressure and/or where the connector
is subjected to high vibratory conditions.
EEnvironmental resisting with grommet seal and
strain relief backshell except for 3102 type.
FEnvironmental resisting with grommet seal,
strain relief backshell and front gasket seal for plug
type.
REnvironmental resisting with grommet seal,
shorter and lightweight.
Features for 97B reverse bayonet coupling connectors
with Mil-C-5015 insert patterns:
Quick positive coupling
Audible and tactile indication of full coupling
Waterproof
No lockwiring required
High shock and vibration capabilities
Operating temperature range with Neoprene
0 0
inserts: -55 C to +125 C
Insert available in Neoprene material (alternate
inserts materials available upon request)
Available in both crimp and solder terminations
Contacts available in gold and silver plating
Numerous finishes available
Zinc alloy plating (cadmium free) available
500 couplings minimum
Rugged construction; aluminum or stainless
steel components
Intermateable with existing VG95234
connectors
MS And 97B Series
AMPHENOL
5
Electrical Data
Dielectric strength
Service rating Test Voltage
Vac rms
Inst. 1000V
A 2000V
D 2800V
E 3500V
B 4500V
C 7000V
Service rating
Service rating Operating Voltage
DC at Sea Level
Operating Voltage
AC at Sea Level
Inst. 250V 200V
A 700V 500V
D 1250V 900V
E 1750V 1250V
B 2450V 1750V
C 4200V 3000V
Contact rating
Contact
Size
Contact
Resistance
miliohms
Rated
Current
16 3.4613A
12 1.8323A
8 0.5246A
4 0.2680A
0 0.14150A
MS And 97B Series
AMPHENOL
Insert Orientations
Position W
Position Y Position Z
Views looking into front face of pin insert or rear
of socket insert
18-5
18-9
18-13
18-14
20-7
20-8
20-9
20-12
20-14
16-7 20-16 22-18 24-4
Degree
W X Y Z
80 110 250 280
24-21 28-15 36-1
36-7
36-8
36-13
28-16
28-17
28-19
28-20
28-21
32-1
32-3
32-4
24-28
28-1
28-4
28-8
28-9
28-10
28-11
28-14
24-5
24-6
24-7
24-12
24-14
24-16
24-17
24-20
22-19
22-21
22-24
22-25
22-29
22-33
22-34
24-1
24-3
20-20
20-22
22-3
22-6
22-12
22-14
22-15
22-16
22-17
Position X
To avoid cross-plugging problems in applications
requiring the use of more than one connector of
the same size and arrangement, alternate insert
rotations are available as indicated in the
accompanying chart.
As shown in the daigram below, the front face of
the pin insert is rotated within the shell in a
clockwise direction from the normal shell key. The
socket insert would be rotated counterclockwise
the same number of degrees with respect to the
normal shell key.
The following insert arrangements have the same
alternate insert rotations for W, X, Y and Z which
are as below :
Insert
Arrang-
ement
Degrees
W
12S-3
14S-9
16S-5
18-8
18-1
18-22
20-3
20-4
14S-2
18-10
18-15
14S-5
16-9
16-11
16-13
18-3
18-4
20-5
16S-4
16S-1
18-12
14S-7
16-10
16S-6
18-20
18-29
16S-8
18-11
70
70
70
70
70
70
70
45
-
-
-
-
35
35
35
35
35
35
35
80
80
90
90
90
90
90
-
-
145
145
145
-
145
145
145
110
120
120
120
110
110
110
110
110
110
110
110
-
-
180
180
180
180
180
170
170
215
215
215
-
215
215
215
250
240
240
240
-
250
250
250
250
250
250
250
-
-
270
270
270
270
270
265
265
290
290
290
290
290
290
290
-
-
-
-
-
325
325
325
325
325
325
325
280
280
-
-
-
-
-
-
-
X Y Z
Insert
Arrang-
ement
Degrees
W
28-3
28-6
28-18
28-22
36-3
36-4
24-22
28-5
28-2
28-7
36-6
36-9
36-10
32-8
24-27
28-12
36-14
36-15
36-5
70
70
70
70
70
70
45
35
35
35
35
80
80
80
80
90
90
60
-
145
145
145
145
145
145
110
110
110
110
110
125
125
125
-
180
180
125
120
215
215
215
215
215
215
250
250
250
250
250
235
235
235
-
270
270
245
240
290
290
290
290
290
290
-
325
325
325
325
280
280
280
280
-
-
305
-
X Y Z
Insert
Arrang-
ement
Degrees
W
20-6
22-2
22-9
20-15
20-18
20-21
20-23
20-24
20-27
22-10
22-11
22-13
22-20
22-23
22-22
24-11
24-9
22-1
22-4
22-5
22-8
20-29
20-17
20-19
22-27
22-28
24-2
24-10
70
70
70
80
35
35
35
35
35
35
35
35
35
35
-
35
35
35
35
35
35
80
90
90
80
80
80
80
145
145
145
-
110
110
110
110
110
110
110
110
110
-
110
110
110
110
110
110
110
-
180
180
-
-
-
-
215
215
215
-
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
-
270
270
250
-
-
-
290
290
290
280
325
325
325
325
325
325
325
325
325
-
-
325
325
325
325
325
325
280
-
-
280
280
280
280
X Y Z
A
B
A
B
A
B
A
B
40-56 72 144 216 288
6
MS And 97B Series
AMPHENOL
Insert Arrangements
7
MS And 97B Series
Insert
Arran-
gement
Contact Size
0 4 8
10S-2
10SL-3
10SL-4
12S-3
12S-4
12-5
14S-2
14S-5
14S-6
14S-10
14S-12
16S-1
16S-3
16S-4
16S-5
16S-6
16S-8
16-9
18-5
18-8
18-9
18-17
18-19
18-20
18-22
18-29
18-30
18-31
20-3
20-4
20-6
20-7
18-24
18-10
18-11
18-12
18-7
18-1
18-4
16-10
16-11
16-13
18-3
16-12
18-6
16-2
16-7
18-13
18-15
18-16
18-14
14-3
14S-4
14S-7
14S-9
A
A
A
A
D
D
Inst
Inst
Inst
Inst
A
A
B
D
A
A
A
A
D
A
Inst
Inst
A
A
D
A
A
A
D
D
D
D/A
A/Inst
A
A
A
B
A/Inst
D
A
A
A
D
A
D
E
A
A
A
C
A
A
D
A
A
1
3
2
2
1
1
4
5
6
4
3
7
1
2
3
3
5
4
3
8
7
7
10
5
3
5
5
5
3
4
3
8
10
4
5
6
1
10
4
3
2
2
2
1
1
1
3
4
4
1
2
1
1
3
2
1
3
2
2
1
1
4
5
6
4
3
7
1
2
3
3
5
2
1
7
5
5
10
5
3
5
5
5
3
8
10
6
1
10
4
1
2
3
4
1
2
2
1
2
2
3
4
4
5
1
3
2
2
2
1
1
1
1
1
20-8 Inst 6 42
1
1
3
2
12 16
Service
Rating
Total
Cont-
acts
14S-1 A3 3
14S-A7 A19 19
Insert
Arran-
gement
Contact Size
0 4 8
20-9
20-11
20-12
20-14
20-15
20-16
20-17
20-19
20-20
20-23
20-24
20-27
20-25
20-18
20-21
20-22
D/A
Inst
A
A
A
A
A
A
A
A
A
A
Inst
A
A
A
8
13
2
5
7
9
6
3
4
2
4
14
13
9
9
6
71
13
11
2 3
7
72
15
3
31
2
22
14
20-29
20-30
20-33
A
Inst
A
17
13
11
17
13
11
22-1
22-2
22-6
22-14
22-17
22-18
22-19
22-20
22-21
22-16
22-11
22-13
22-7
22-8
22-10
22-12
22-9
22-15
22-4
22-5
22-22
22-23
D
D
D
A
D/A
D/A
A
A
A
A
B
D/A
E
E
E
D
E
E/A
A
D
A
D/A
2
3
3
19
9
8
14
9
3
9
2
5
1
2
4
5
3
6
4
6
4
8
2
3
1
19
8
8
21
2
14
2 2
2 4
2
1
14
9
63
1
2
4
32
3
15
8
4
22-28
22-34
24-2
24-5
24-6
24-7
24-9
24-10
24-3
22-24
22-27
A
D
D
A
D/A
A
A
A
D
D/A
D/A
7
5
7
16
8
16
2
7
7
6
9
23
7
16
8
142
24-11 A 9 63
24-12 A 5 32
52
42
81
7
2
7
13
63
81
33
12 16
Service
Rating
Total
Cont-
acts
A
20-A48 19
24-06 A642
24-16
24-17
D/A
D
7
5
3
3
3
2
1
Insert
Arran-
gement
Contact Size
0 4 8 12 16
Service
Rating
Total
Cont-
acts
28-20
28-21
28-22
32-3
32-1
28-18
28-19
A
A
D
D
D/A
C/D/A/Inst
B/D/A
14
37
6
9
5
12
10
4
12
4 6
10
37
3 3
2 421
32
24-20
24-21
24-22
24-27
24-28
28-1
28-2
28-4
28-5
28-8
28-9
28-11
28-12
28-13
28-15
28-16
28-17
28-10
28-3
28-6
28-7
D
D
D
E
Inst
D/A
D
E/D
D
E/D/A
D
A
A
A
A
A
B/D/A
D/A
E
D
D
11
10
4
7 7
24
9
14
9
5
12
12
22
26
26
35
20
15
7
3
3
2
92
91
4
24
63
122
72
212
102
66
184
26
26
35
20
15
2 2 3
3
3
2
D
32-5 2 2
28-09
28-51
A
D
9
12
4
12
5
32-8 A 30 6 24
36-17
38-18
36-52
36-20
A
A
A
A
47
31
52
34
407
14141421
52
3022
36-15
36-16
36-8
36-9
36-10
36-11
36-13
36-14
36-12
D/A
A
A
A
A
A
E/A
D
A
35
47
47
31
48
48
17
16
48
35
407
48
48
48
2 15
5 5 6
1 46
1 2 14 14
36-3
36-6
36-7
36-5
36-4
D
A
A
A
D/A
6
6
47
4
3
40
36-1 D 22 4 18
33
2 4
7
4
3
40-56 A 85 85
A
40-63 61
D
32-17 4 4
32-6 A23 232 16
32-7
INST,A
35 728
32B-13 D13 13
32-22 A 54 54
18-06 6 4 2
20-2 1 1
24-4 1 3
36-46 A27 27
AMPHENOL
8
A
B
C
D
E
A
B
C
A
B
C
Insert rrangementsA
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 40
A
B
C
D
E
F
G
A
B
A
B
C
BC
DA
A
B
C
A
B
C
D
EA
B
C
D
E
F
A
B
C
D
AB AB
A
B
C
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
10S-2
A
1
16
10SL-3
A
3
16
C
Front of
socket insert
14S-7
A
3
16
B
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
16S-1
A
7
16
G
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
16S-5
A
3
16
A
16S-6
A
3
16
B
16S-8
A
5
16
E
*14S-12
A
3
16
B
100 rotation
of 14S-7
0
10SL-4
A
2
16
Front of
socket insert
12S-3
A
2
16
12-5
D
1
12
12S-4
A
1
16
14S-2
Inst.
4
16
14S-4
D
1
16
14S-5
Inst.
5
16
14S-6
Inst.
6
16
A
B
14S-9
A
2
16
*14S-10
Inst.
4
16
100 rotation
of 14S-2
0
*14-3
A
1
8
*16S-3
B
1
16
16S-4
D
2
16
*16-2
E
1
12
MS And 97B Series
A
B
C
F
EG
D
14S-1
B
A
C
*Not tooled up, can be tooled up on request. Contact Factory.
14S-1
A
3
16
14S-A7
A
7
16
AMPHENOL
9
Insert rrangementsA
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 840
B
A
H
C
D
E
F
G
B
A
C
D
E
F
G
A
C
DB
A
B
C
D
A
B
C
D
E
F
B
A
D
C
B
A
C
D
E
B
C
AA
B
A
B
A
B
A
B
C
D
E
A
BC
DEFG
HJ
K
A
G
B
C
D
E
F
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
16-10
A
3
12
B
B
A
D
C
18-4
D
4
16
A
18-10
A
4
12
D
B
A
C
18-5
D
2 1
12 16
C
18-11
A
5
12
E
18-12
A
6
16
C or D
18-19
A
10
16
K
*18-13
A
1 3
8 12
A
18-20
A
5
16
D
18-8
A
1 7
12 16
H
16-11
A
2
12
16-12
A
1
4
*16-13
A
2
12
A
B
C
D
E
F
G
H
I
J
18-1
B,C,F,G=A;Bal.=Inst.
10
16
A
B
18-3
D
2
12
18-9
Inst.
2 5
12 16
18-15
A
4
12
*18-14
A
1 1
4 16
18-7
B
1
8
*18-6
D
1
4
18-16
C
1
12
100 rotation
of 18-9
-
o
*18-17
Inst.
2 5
12 16
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
A
B
C
D
AB
C
16-7
A
1 2
8 16
C
16-9
A
2 2
12 16
18-06
A
2 4
16 12
B
A
C
D
E
F
AMPHENOL
Insert rrangementsA
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
B
A
G
H
C
D
E
F
B
A
C
D
E F
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
AB
CE
D
*18-29
A
5
16
D
20-7
A,B,H,G=D;C,D,E,F=A
8
16
A
B
A
G
C
D
E
F
20-15
A
7
12
A or D
B
A
G
IH
C
D
E
F
20-16
A
2 7
12 16
E
B
A
C
D
E
F
G
H
20-9
H=D;Bal.=A
1 7
12 16
H
B
A
C
DF
E
20-17
A
5 1
12 16
E or F
A
B
C
20-3
D
4
12
A
B
A
C
D
E
F
GH
I
20-18
A
3 6
12 16
D
B
A
C
20-19
A
3
8
C
B
A
C
D
E
20-14
A
2 3
8 12
D
B
A
C
D
20-20
A
1 3
4 12
A
AB
CE
D
0
-
*18-30
A
5
16
C
110 rotation
of 18-20
AB
CE
D
0
-
*18-31
A
5
16
C
260 rotation
of 18-20
F
A
B
C
D
E
20-22
A
3 3
8 16
A
B
20-23
A
2
8
20-8
Inst.
2 4
8 16
B
L
A
C
D
N
MEF
GHK
J
20-11
Inst.
13
16
B
A
*20-12
A
1 1
4 16
F
A
B
C
D
E
G
H
I
*20-21
A
1 8
12 16
1
10
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
A
B
C
DA
B
C
20-4
D
4
12
C or D
*20-6
D
3
16
A
AB
C
18-22
D
3
16
C
B
A
H
GI
C
D
E
FJ
250 rotation
of 18-1
-
o
*18-24
B,C,F,G=A;Bal.=Inst.
10
16
A
B
C
D
E
F
G
H
J
20A - 9
A
9
12
20-2
D
1
0
-
AMPHENOL
11
Insert rrangementsA
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
AB
C
D
E
F
N
M
J
K
G
H
P
R
S
T
L
20-29
A
17
16
G
A
B
C
D
E
F
G
H
J T YP
NK
LM
SR
U
22-14
A
19
16
A
A
C B
D
22-10
E
4
16
C
KA
B
C
D
E
F
H
JM
L
20-33
A
11
16
E
A
C
B
*22-6
D
2 1
8 16
B
A
BE
D C
22-12
D
2 3
8 16
A
A
B
C
22-2
D
3
8
A
22-9
E
3
12
A
A
BC
22-13
E=D;A,B,C,D=A
4 1
12 16
E
A
B
E
D
C
22-5
D
2 4
12 16
D
AF
E B
CD
*22-4
A
2 2
8 12
C
B
A
D
C
AB
22-11
B
2
16
AB
22-1
D
2
8
A
BC
D
EF
N
M
J
K
GH
L
o
*20-30
Inst.
13
16
250 rotation
of 20-11
22-7
E
1
0
B A
*22-8
E
2
12
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
20-27
A
14
16
M
A
BC
D
EF
GH
J
K
L
M
N
100 rotation
of 20-11
0
_
*20-25
Inst.
13
16
A
B
C
D
20-24
A
2 2
8 16
A
M
L
KUNB
P
V
T
JC
R
S
H
G
D
E
F
20 A - 48
A
19
16
AMPHENOL
Insert rrangementsA
Front face of pin insert or rear of socket insert illustrated
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
CONTACT LEGEND 16 12 8 4 0
22-28
A
7
12
G
C
B
A
F
G
E
D
22-20
A
9
16
D
A
B
C
D
E
FJ
GH
22-24
C,D,E=D;A,B,F=A
2 4
12 16
D
C
B
A
F
E
D
22-19
A
14
16
F
AB
C
D
E
F
N
M
J
K
G
H
P
L
22-23
H=D;Bal.=A
8
12
A or D
A
B
C
D
E
F
G
H
22-22
A
4
8
C or D
A
BC
D
*22-21
A
1 2
0 16
A
B
C
C
B
A
F
G
HJ
E
D
22-27
J=D;Bal.=A
1 8
8 16
12
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
A
B
H
G
F
EDC
22-18
A,B,F,G,H=D;C,D,E=A
8
16
D
*22-17
A=D;Bal.=A
1 8
12 16
E
AB
H
G
F
E
D
C
J
22-16
A
3 6
12 16
D
A
B
H
G
F
E
D
C
J
22-15
D=E;A,B,C,E,F=A
5 1
12 16
D
A
B
C
D
E
F
24-5
A
16
16
S
A B
C
D
F H
J
L
P R
N
S
M
K
G
E
24-6
A,G,H=D;Bal.=A
8
12
D
AG
F
E
D
H
C
B
24-4
A
3 1
16 0
-
A
24-4
B
C
D
24-2
D
7
12
A
AF
EGB
CD
*24-3
D
2 5
12 16
D
AF
EGB
CD
*22-34
D
3 2
12 16
E
C
A
B
ED
AMPHENOL
Insert rrangementsA
Front face of pin insert or rear of socket insert illustrated
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
CONTACT LEGEND 16 12 8 4 0
24-11
A
3 6
8 12
E
AB
E FD
G
H
I
C
24-21
D
1 9
8 16
E
B
C
A
H
G
J K
D
E
F
*24-17
D
2 3
12 16
D
B
C
D
E
A
24-20
D
2 9
12 16
A
B
C
J
H
L
K
G
F
D
E
A
*24-16
A,B,F,G=D;C,D,E=A
1 3 3
8 12 16
G
A
B
C
D
E
F
G
24-12
A
2 3
4 12
A
B
C
D
E
*24-27
E
7
16
D
A
B
C
D
G
F
E
24-22
D
4
8
D
B
C
A
D
28-1
A,J,E=D;Bal.=A
3 6
8 12
E
H A
G
F
E
J
B
C
D
F G H J
E
K L M N P Q
VUTS
R
W X Y Z
A B C D
24-28
Inst.
24
16
13
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
24-10
A
7
8
D or E or G
B
C
GE
F A
D
A
B
24-9
A
2
4
24-7
A
2 14
12 16
G
H
I
J
K
LAB
C
D
E
F
G
O
M
NP
*28-2
D
2 12
12 16
E
H P
K
M
N
L
A
G
FE
JB
C
D
A
B
C
DE
24-06
24-06
A
2 4
16 8
AMPHENOL
14
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
28-12
A
26
16
H
A
B
C
D
E
F
G
W
V
U
T
S
R
P
N
MZ
Y
L
K
JH
X
a
b
d
28-10
G=D;Bal.=A
2 2 3
4 8 12
G
B
A
G
C
D
E
F
28-11
A
4 18
12 16
M
B
A
G
H
IM
L
K
J
N
P
R
S
T
X
W
V
U
C
D
E
F
28-6
D
3
4
A
C
A
B
*28-13
A
26
16
H
100 rotation
of 28-12
o
A
B
C
D
E
F
G
W
V
T
U
S
R
P
N
MZ
Y
L
K
J
H
X
a
b
d
28-9
D
6 6
12 16
E
B
A
J
H
G
K
M L
C
DE
F
28-8
L,M=E;B=D;Bal.=A
2 10
12 16
D
E
F
G
H
M
L
C
D
A
B
A
B
28-7
D
2
4
MS And 97B Series
*28-4
G,S,P=E;Bal.=D
2 7
12 16
E
A
S
G
P
B
C
EF
D
*28-5
D
2 1 2
4 12 16
A
B
E
DC
28-3
E
3
8
A
A
B
C
A
B C
DF
GH
J
E
28-09
A
5 4
16 4
*Not tooled up, can be tooled up on request. Contact Factory.
AMPHENOL
32-5
D
2
0
BC
DEF
G
H
J
A
*32-3
D
1 2 2 4
0 4 12 16
B
C
D
A
E
32-1
A=E;B,C,D,E=A
2 3
0 12
28-51
D
12
12
A
B
C
D
E
F
H
J
K
L
M
N
15
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
B
A G
H
C D
JE
K
F
L
R
N
MP
*28-17
R=B;M,N,P=D;A to L=A
15
16
N
A
E
K
S
Z
f
l m n p
g h j k
a b c d e
T U V W X Y
L M N P R
F G H J
B C D
28-21
A
37
16
A
B
A
G
H
C
D
J
E
K
L
F
M
28-18
M=C;G,H,J,K,L=D;A,B=ABal.=Inst.
12
16
B
A
G
H
C
J
E
L
KM
28-19
H,M=B;A,B=D;Bal.=A
4 6
12 16
H
B
A
G
H
C
J
E
DF
L
KN
P
M
28-20
A
10 4
12 16
E
B
F
C
D
E
A
28-22
D
3 3
4 16
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
28-16
A
20
16
F
A
B
C
D
E
F
G
VU
T
S
R Q P
N
M
L
K
J
H
28-15
A
35
16
M
AB
CDEFG
W
V
UT
S
R
P
N
M
Z a b c
d e f g h
j k
l m
Y
L
K
J
H
X
AMPHENOL
B
D
E
F
C
A
BA
DE
I K L M
O P R S T
U V W
N
F
C
GH
J
AB
C D
H JGF
LM
N
S T U Y W
R
PO
XYZ
K
bcde
a
f
ghj
i
klmnr
ovw
x y
zAA
AB AC
AD AE
AF AG
16
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
A
D
CB
1
2
3
4
5
6
7
8
9
10
11
12
13
32B13
B
D
E
I
J
K
L
F
C
G
H
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
32-8
A
6 24
12 16
S
KLMN
W
XY
Z
GH
IJ
S
T
UV
AB
CD
E F
O
PR
WX
32-6
A
16 2 3 2
16 12 8 4
32-7
INST , A
4 24 7
16 12
F
G
H
I
J
R
S
T
U
V
K
L
M
N
W
X
Y
Z
A
B
C
D
E
O
P
f
g
h
j
k
a
b
c
d
e
32B-13
D
13
8
32-17
D
4
4
32-22
A
54
16
*36-1
D
4 18
12 16
36-3
D
3 3
0 12
AMPHENOL
17
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
B
A
C
D
M
I
J
K
L
N
R
T
X
W
V
U
S
Z
a
Y
b
c
f
e
dE
H
P
O
F
G
A
B C
D
GFE
H
KI J M L
RPON
S T Y U V
W X Z a
b c d e
jh
gf
m n kpr
t
u
s
vw
z
y
x
kd
l m n p r s
xwvt
y z
u
e f g h j
aZYXWV
UTSRQPO
NMLKJH
C D E F
A B
G
b c
BA
C E
D
F
H
K L M N
O P
U V W X
Y Z a b c
d
hel f gm
nu w v
z
y
r
p
s
y
v
k
j
R S T
JI
G
A
BC
A
B
C
D
A
F
E
B
C
D
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
36-4
A=D;B,C=A
3
0
*36-7
A
7 40
12 16
x or y
36-10
A
48
16
A
36-5
A
4
0
*36-8
A
1 46
12 16
Y
*36-11
A
48
16
A
100 rotation
of 36-10
250 rotation
of 36-10
o o
36-6
A
2 4
0 4
*36-9
A
1 2 14 14
4 8 12 16
P
*36-12
A
48
16
A
kd
l m n p r s
xwvt
y z
u
e f g h j
aZYXWV
UTSRQPO
NMLKJH
C D E F
A B
G
b c
kd
l m n p r s
xwvt
y z
u
e f g h j
aZYXWV
UTSRQPO
NMLKJH
C D E F
A B
G
b c
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
AMPHENOL
Insert Arrangements
Front face of pin insert or rear of socket insert illustrated
CONTACT LEGEND 16 12 8 4 0
S
R
Q
P
A
B
C
D
E
F
G
H
J
K
ZYX
M
L
N
U
T
d
e
a
b
ck
jm
h
g
V
f
W
A B
E
MNLK
O
U
Y Z a
hd e lfgm
p
s
k
j
n
r
uwv
y
z
y
b c
T
V W X
P R S
CD
G
JI
F
H
M
S
D
I
O
U
EA
B
H
P
J
KFC
G
L
N
R
T
X
W
c
b
f
e
Y
V
Z
da
P N
M
L
A
B
C
K
J
H
GFE
Q
D
R S
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*36-15
M=D;Bal=A
35
16
J
*36-16
A
7 40
12 16
x or y
100 rotation
of 36-7
o
A B
E
MNLK
O
U
Y Z a
hd e lfgm
p
s
k
j
n
r
uwv
y
z
y
b c
T
V W X
P R S
CD
G
JI
F
H
*36-17
A
7 40
12 16
x or y
250 rotation
of 36-7
o
Insert arrangement
Service rating
Number of contacts
Contact size
Premating contact
*36-13
N,P,Q=E;Bal.=A
2 15
12 16
A
B
K
J
I
H
G
N
M
F
E
D
L
Q
P
C
*36-14
D
5 5 6
8 12 16
*36-18
A
1 2 14 16
4 8 12 16
100 rotation
of 36-9
o
R S T U V W
X Y Z a b c
d e
h j
km
fg
P
H J
C D E F G
BA
K L NM
*36-20
A
2 2 30
8 12 16
k
A
E
L M N P R S
T
a b c d f g h i
j k m n p q r
s t u v w x
y z AA AB AC
AD AE AF AH
U V W X Y Z
F H J K
B C D
36-52
A
52
16
18
MS And 97B Series
*Not tooled up, can be tooled up on request. Contact Factory.
40-56
A
85
16
NPRSTUVW
XYZacdf
h
jkmnprs
tuvwxyz
bg
i
p
A A B
A
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT AU AV AW AX AY
AZ BA BB BC BD BE BF BH
BJ BK LB BM BN BP BR
BS BT BU BV
X Y
W Z
40 - 56
ACD
EFHJ K L M
B
36-46
A
27
16
40-63
A
61
16
A
E
L
MNPR
S
T
a
bc
d
U
V
W
X
Y
Z
F
H
J
K
B
C
D
G
AMPHENOL
19
MS-3100 MS-4100
Cable Connecting Receptacle
MS-3101 MS-4101
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 AND 36
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
4.55 DIA. FOR 40 SIZE
M
A
K
V
PANEL OPENING
All dimensions are in mm
Connector
Size
1.98
1.98
1.98
1.98
1.98
1.98
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.45
14.29 20.62
20.62
20.62
23.82
23.82
26.97
26.97
30.17
33.32
36.52
39.67
46.02
53.0
58.72
62.00
14.29
14.29
14.29
19.05
19.05
19.05
19.05
19.05
19.05
20.64
20.64
22.25
22.22
22.22
18.25
20.64
20.64
23.02
23.02
24.61
24.61
26.99
29.37
31.75
34.92
39.69
44.45
49.21
55.58
25.68
27.76
27.76
30.43
30.43
32.82
32.82
35.07
38.38
41.55
44.70
51.08
57.15
63.78
69.85
5/8-24 NEF5/8-24 UNEF
11/16-24NEF
11/16-24NEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
7/8-20 UNEF1-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/8-18 UNEF
1 1/4-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 5/8-18 NEF1 3/4-18 UNS
1 7/8-16UN2.00-18 UNS
2 1/16-16UN
2 5/16-16 UN
2 1/4-16 UN
2 1/2-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A K M O R S V
Thread
in inches
Thread
in inches
40
Shell Types
Wall mounting receptacle
V A
MS And 97B Series
All dimensions are in mm
Connector
Size
5/8-24 NEF5/8-24 UNEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
7/8-20 UNEF1-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/8-18 UNEF
1 1/4-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 5/8-18 NEF1 3/4-18 UNS
2-18 UNS
2 5/16-16 UN
2 1/4-16 UN
2 1/2-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A V
Thread
in inches
Thread
in inches
40
1 7/8-16UN
2 1/16-16UN
R
R
S
S
AMPHENOL
20
M
A
A
Q
V
K
L
N
R
S
R
S
Shell Types
Box mounting receptacle
Straight Plug
MS-3102 MS-4102
MS-3106 MS-4106
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 AND 36
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
4.55 FOR 40 SIZE
All dimensions are in mm
All dimensions are in mm
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
Connector
Size
1.98 30.18
1.98 30.18
41.28
41.28
41.28
49.28
49.28
49.28
49.28
49.28
49.28
49.28
49.28
30.18
30.18
1.98
1.98
1.98
1.98
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.17
3.45
13.89 15.87
17.46
17.46
19.05
19.05
22.22
22.22
25.40
28.57
31.75
34.92
41.27
48.26
53.97
58.25
14.28
14.28
14.28
19.05
19.05
19.05
19.05
19.05
19.05
20.64
20.64
22.22
22.22
22.22
18.25
20.64
20.64
23.02
23.02
24.61
24.61
26.99
29.37
31.75
34.92
39.69
44.45
49.21
55.58
25.68
28.04
28.04
30.43
30.43
32.82
32.82
35.08
38.38
41.55
44.73
51.08
57.15
63.78
69.85
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4-16 UN
2 1/2-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A K L M N R S
Thread
in inches
Connector
Size
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
63.50
5/8-24 NEF5/8-24 UNEF
11/16-24NEF
11/16-24NEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
7/8-20 UNEF1-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/8-18 UNEF
1 1/4-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 5/8-18 NEF1 3/4-18 UNS
2-18 UNS
2 5/16-20 UN
2 1/4-16 UN
2 1/2-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A Q
max
V
Thread
in inches
Thread
in inches
40
40
MS And 97B Series
1 7/8-16UN
2 1/16-16UN
AMPHENOL
21
Shell Types
Right angle plug
MS-3108 MS-4108
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
All dimensions are in mm
Connector
Size
19.05
19.84
19.84
22.22
22.22
25.40
25.40
28.57
31.75
34.92
38.10
44.45
51.75
57.15
5/8-24 NEF5/8-24 UNEF
11/16-24 NEF
11/16-24 NEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF1-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
7/8-20 UNEF1-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/8-18 UNEF
1 1/4-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 5/8-18 NEF1 3/4-18 UNS
1 29/32-18 NS2-18 UNS
2 1/16-20 UNS2 1/4-16 NS
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A Q
max
V
Thread
in inches
Thread
in inches
63.50 2 5/16-16 UN2 1/2-16 UN
40
Q max
MS And 97B Series
Shell Types
Box mounting receptacle
97B-3100 97B-4100
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 , 36 AND 40
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
All dimensions are in mm
VK
A
M
Connector
Size
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
18.2
23.0
24.6
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-16 UN
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
10SL
14S
16S
16
18
20
22
24
28
32
36
A K M R S V
Thread
in inches
40 65.5 4.0 22.2 55.5 69.85
1 7/8-16UN
2 1/16-16UN
V
A THREAD
R
R
S
S
AMPHENOL
Cable Connecting Receptacle
97B-3101 97B-4101
Q
VK
A
M
MS And 97B Series
22
Shell Types
Front box mounting receptacle
97B-3102 97B-4102
MOUNTING HOLES
4.39 DIA. FOR SIZE 32 ,36 AND 40
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
All dimensions are in mm
Connector
Size
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
18.2
23.0
24.6
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
15.9
19.2
22.4
22.4
25.6
29.0
32.2
35.3
41.4
47.8
52.4
24.7
24.7
24.7
33.8
34.5
34.5
34.5
35.7
35.7
37.3
37.3
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
10SL
14S
16S
16
18
20
22
24
28
32
36
A K MR S N
max
L
max
40 65.5 4.0 22.2 55.5 69.85 58.70 37.3
R
R
S
S
K
L
A
N
M
All dimensions are in mm
Connector
Size
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-16 UNS
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
10SL
14S
16S
16
18
20
22
24
28
32
36
VMKA Thread
in inches
40 65.5 4.0 22.2
1 7/8-16UN
2 1/16-16UN
AMPHENOL
23
Back Box Mounting Receptacle MOUNTING HOLES
4.39 DIA. FOR SIZE 32 , 36 AND 40
3.73 DIA. FOR SIZE 24 AND 28
3.05 DIA. FOR ALL OTHER SIZES
VK
A
M
MS And 97B Series
V
Q
Shell Types
Straight plug
97B-3106 97B-4106
18.2
18.2
18.2
21.5
23.05
23.05
23.05
23.05
24.05
24.05
24.05
All dimensions are in mm
Connector
Size
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
18.2
23.0
24.6
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-24 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
10SL
14S
16S
16
18
20
22
24
28
32
36
A K M R S V
Thread
in inches
40 65.5 4.0 24.05 55.5 69.85 2 5/16-16 UN-2A
1 7/8-16UN
2 1/16-16UN
All dimensions are in mm
Connector
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-16 UN
V
Thread
in inches
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53.4
60.1
66.3
69.10
Q
max
40
1 7/8-16UN
2 1/16-16UN
R
R
S
S
L
REF.
27.60
33.81
35.71
37.31
97B-3103X* / 97B-4103X*97B-3103 / 97B-4103
* Replace X with Required Class
‘L’
AMPHENOL
24
Right Angle Plug
97B-3108 97B-4108
Note - Both versions, straight and diamond knurling available on coupling ring. For details, contact factory.
L
V
MS And 97B Series
All dimensions are in mm
Connector
Size
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53.4
60.1
66.3
69.10
10SL
14S
16S
16
18
20
22
24
28
32
36
Q
max
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1 29/32-18 NS
2 1/16-20 UNS
2 5/16-16 UN
V
Thread
in inches
40
L
max
K
max
45
47
48
57
58
61
61
66
66
72
75
78
30
30
30
35
35
35
35
40
40
45
50
55
Shell Types
Jam nut receptacle
97B - 3107R 97B-4107R
S
H
D
G
W
NUT
S
All dimensions are in mm
18.2 2.5 35.0 31.5
37.9
41.0
41.0
44.8
49.0
52.2
55.0
62.0
68.0
75.0
13.5
13.5
13.5
13.5
15.0
15.0
15.0
15.0
15.0
15.0
15.0
3.2
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
29.2
29.2
29.2
37.7
40.0
40.0
40.0
40.0
40.0
40.0
40.0
12.5
12.5
12.5
21.0
21.0
21.0
21.0
21.0
21.0
21.0
21.0
5.0
6.0
6.0
6.0
7.0
7.0
7.0
7.0
7.0
7.0
8.0
31.8
38.1
41.2
41.2
45.0
49.2
52.4
55.2
62.2
68.2
75.2
24.6 2.5 41.3
27.4 2.5 44.4
27.4 2.5 44.4
30.8 3.0 48.2
34.1 3.0 52.4
37.3 3.0 55.5
40.8 3.0 59.0
46.7 3.0 66.0
53.3 3.0 72.0
59.6 3.0 80.0
A
Ref.
D
Ref.
G
Ref.
H
Ref.
J
Ref.
K
Ref.
L
Ref.
M
Ref.
W
Ref.
S
0.3
Shell
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
+
-
B THREAD
236 MAX.
PANEL THICKNESS
O-RING
K
L
A
J
M
K
Q max
AMPHENOL
25
Shell Types
Jam nut receptacle
97B - 3107 97B-4107
MS And 97B Series
L1
L3
LP
L4
d 2 e
e
L4
All dimensions are in mm
22.8
29.2
32
32
36.5
39.9
43.1
46.6
53.4
60.1
66.3
72.5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
4.3
18.2
23
24.6
24.6
27
29.4
31.8
34.9
39.7
44.5
49.2
55.5
28.1
28.1
28.1
37.6
38.6
38.6
38.6
41
41.8
45
45
45
2.8
3.2
3.2
3.2
4
4
4
4
4
4
4
4
25.4
30
32.5
32.5
35
38
41
44.5
50.8
57
63.5
69.9
d1
Max
Shell
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
d2
H13
e
0.1
l1
~
l3
0.2
l4
0.3
+
-
+
-
+
-
Shell Types
Panel mounting plug connector
97B - 3110X 97B-4110X
All dimensions are in mm
11.2
14.6
15.7
15.7
16.8
18.0
20.0
20.2
22.5
24.7
26.9
29.6
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
5.2
7.5
7.5
7.5
9.0
9.1
9.1
9.1
10.0
10.0
8.3
8.3
36.2
38.9
38.9
48.5
49.3
49.3
49.3
49.6
51.9
51.9
51.9
51.9
24.5
26.8
26.8
32.1
33.7
33.7
33.7
33.7
35.2
35.2
35.2
35.2
4.0
4.8
4.8
4.8
4.8
4.8
4.8
4.8
5.6
5.6
5.6
5.6
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
65.5
31.8
41.3
44.4
44.4
47.6
50.8
57.2
57.2
63.5
69.8
76.2
82.5
27
33
38
38
40
44
51
51
56
62
71
76
G
0.3
L
0.3
M
0.3
P
0.2
R
0.4
Shell
Size
10SL
14S
16S
16
18
20
22
24
28
32
36
40
Min. Max.
J
Wall Thickness N
+0.00
-0.15
+
-+
-+
-+
-+
-
S
0.3
+
-
5/8-24 NEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
1.7/8-16UN
2 1/16-20 UNS
2 5/16-16 UN
Thread
in inches
S
G
G
S
RB
L
M
JP
N
O-Ring
V
AMPHENOL
26
Q
L
VA
Q
L
A
Back Accessories
Solid backshell without grommet and sleeve
Class A
Solid Backshell With Grommet & Sleeve
Class R
All dimensions are in mm
Connector
Size
47 48
47 ---
55 ---
47 48
55 ---
47 48
55
56
57 57
57 57
57 57
57 57
57 57
58.25 60
58.25
58.25
60
60
21.505/8-24 NEF
20.35
20.35
23.40
23.40
11/16-24 NEF
11/16-24 NEF
26.717/8-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF 26.71
29.50
35.70
1-20 UNEF
35.85
1 1/8-18 NS
44.40
1 1/4-18 NEF
1 3/8-18 NEF
45.081 5/8-18 NEF
52.36
56.81
64.50
2 5/16-16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
A Thread
L max
for MS
L max
for 97B
Q
max
class 2B
in inches
All dimensions are in mm
Connector
Size
32.54 37.60 19.05
37.31 --- 19.84
46.83 --- 19.84
36.51 37.64 22.22
46.83 --- 22.22
37.70 38.83 25.40
48.02 48.00 25.40
50.80 51.58 28.57
53.97 54.75 31.75
53.97 54.75 34.92
57.15 57.94 38.10
57.15 57.94 44.45
59.0 59.78 51.75
60.32
71.80
61.13
80.00
57.15
63.50
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4 - 16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
L max
for MS
L max
for 97B
Q
max
V
Thread
in inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
7/8-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-16 UN
A Thread
in inches
Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
40
40
MS And 97B Series
For Plug type For Receptacle
1 7/8-16UN
2 1/16-16UN
1 7/8-16UN
2 1/16-16UN
AMPHENOL
27
Back Accessories
Strain relief backshell with grommet and sleeve
Class E and F
Right Angle Backshell With Or Without Grommet
Class A, F & R
L
A
N
All dimensions are in mm
Connector
Size
37.60
37.80
47.30
39.40
48.90
42.60
52.10
53.70
58.80
58.80
63.60
63.60
69.60
72.8072.80
76.00
45.00 25.00
25.00
25.00
27.00
27.00
28.00
28.00
31.00
34.00
34.00
37.00
39.00
45.00
48.00
22.22
25.40
25.40
28.57
28.57
31.75
31.75
34.13
37.30
40.48
43.66
50.00
56.50
62.71
---
---
47.00
---
48.00
57.00
58.00
61.00
61.00
66.00
66.00
72.00
75.00
78.00
5/8-24 UNEF
5/8-24 UNEF
5/8-24 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 3/16-18 UNEF
1 3/16-18 UNEF
1 7/16-18 UNEF
1 7/16-18 UNEF
1 3/4-18 UNS
2-18 UNS
2 1/4 -16 UN
10SL
12S
14S
14
12
16S
16
18
20
22
24
28
32
36
L max
for MS
L max
for 97B
L1
max
Q
max
V
Thread
in inches
All dimensions are in mm
Connector
Size
54.07
55.90
55.90
64.41
65.94
67.41
67.41
73.28
73.28
74.75
74.7574.75
86.0
54.07
59.10
---
61.34
62.86
71.10
72.55
72.55
76.82
77.82
77.64
125.0
21.97
21.97
25.15
28.45
28.45
30.76
37.29
37.29
44.45
52.22
44.45
57.15
67.10
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
L max
for MS
L max
for 97B
N
max
5/8-24 NEF
11/16-24 NEF
7/8-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-16 UN
A Thread
class 2B
in inches
5/8-24 NEF
11/16-24 NEF
11/16-24 NEF
7/8-20 UNEF
3/4-20 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NS
1 1/4-18 NEF
1 3/8-18 NEF
1 5/8-18 NEF
2 5/16-26 UN
A Thread
class 2B
in inches
L
AV
Q
L1
Note - Both versions, straight and diamond knurling available on back accessories. For details, contact factory.
40
40
55.00 62.71
MS And 97B Series
1 7/8-16UN
2 1/16-16UN
1 7/8-16UN
2 1/16-16UN
AMPHENOL
Ordering Information
MS - XX-PGYY
Where XX- Shell Size
YY-PG-Thread Size
PG Adaptor
Shell
size
G Thread
in inches
PG 9
LLLLLLLA
30 21 26 30
35
26
26
37
40
30
35
35
28
28
40
40
35
35
38
45 37 45 45
57 44 55 57 57 55
4545
35
35
35
40
40
40 40 40 40
28 37
302525302525
23 23 30 23 23 30
AAAAAABBBBBBB
10SL 5/8-24
11/16-24
3/4-20
7/8-20
1-20
1 1/8-18
1 1/4-18
1 3/8-18
2 1/8-18
1 5/8-18
12S
14
16
18
20
22
24
28
36
PG 11 PG 13 PG 16 PG 21 PG 29 PG 36
G
L
PG
B
A
‘O’ Ring
28
MS And 97B Series
Shell size G Thread in inches EGM/PHM 11 EGM/PHM 21
10SL
12SL
14
16
18
20
22
32
36
5/8”-24
25.00 37.00 27.00 41.00
11/16”-24
3/4”-20
7/8”-20
1”-20
1.1/8”-18
1.1/4”-18
1.29/32”-18
2.1/6”-18
25.00
25.00
25.00
29.00
31.50
35.00
35.00
52.00
24 1.3/8”-18
52.00
37.00
37.00
40.00
40.00
52.00
60.00
60.00
70.00
70.00
27.00
27.00
27.00
31.00
33.50
35.00
35.00
52.00
52.00
41.00
41.00
43.00
43.00
55.00
60.00
60.00
70.00
70.00
D D
L L
EGM/PHM
Backshell Accessories
Note:- Rubber Bush supplied in Packing
In case of PHM inner metal Furrele is not required/supplied
G
L
D
‘O’ RING EGM INNER METAL FERRULE
PLASTIC CDMB
RUBBER BUSH
EGM BACKSHELL
GLAND NUT
EGM/PHM11 Can accept cable Min. 5.70 mm & Max. 10.85 mm
EGM/PHM21 Can accept cable Min. 12.70 mm & Max. 17.85 mm
AMPHENOL
29
MS And 97B Series
Shell size A Min. BL Max.
10SL
12S
14S
16S
16
18
20
24
28
7.70
8.20
10.60
13.50
14.60
18.70
24.60
27.00
22.30
24.80
28.50
35.10
34.50
41.00
22 20.80
44.80
27.00
29.50
33.50
35.70
34.00
34.10
C- THD
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 NEF
1 1/4-18 UNEF
1 3/8-18 NEF
1 5/8-18 NEF
32
36
40
38.50
48.20
33.30 51.50
56.00
62.00
34.20
34.20
36.60
1 7/8-16 UN
2 1/16-16 UN
2 5/16-16 UN
20.30 30.00 5/8-24 NEF
Heat Shrink
Boot adaptor (G)
L
C
B
A
3.50+0.20
Back Accessories
Cable clamp
MS-3057
Use MS-3420 sleeves
C
B
A
Part number
MS-3057-4A 10SL, 12S 20.90 21.39 7.94 5/8-24
MS-3057-6A 14, 14S 21.59 25.27 11.11 3/4-20
MS-3057-8A 16, 16S 23.37 28.45 14.29 7/8-20
MS-3057-10A 18 23.37 30.89 15.87 1-20
MS-3057-12A 20,22 23.07 35.03 19.50 1 3/16-18
MS-3057-16A 24,28 25.78 42.75 23.81 1 7/16-18
MS-3057-20A 32 28.00 51.00 31.70 1 3/4-18
MS-3057-24A 36 29.36 57.02 34.92 2-18
Shell
size
Max OD
of cable
A B C Thread
in inches
All dimensions are in mm
5.59
7.92
11.10
14.27
15.87
19.05
23.80
31.75
AMPHENOL
30
MS And 97B Series
Rubber bushing. Protects wire bundles and unjacketed cables from possible damage by cable clamp.
Neoprene Sleeve
MS-3420
D
F
E
450
B
A
C
Part number
MS-3420-3 3.30 5.33 9.50 73.02 0.79
MS-3420-4 5.59 7.67 12.70 69.85
MS-3420-6 7.92 10.84 15.59 66.67
MS-3420-8 11.10 14.02 18.77 63.50
MS-3420-10 14.27 15.62 21.94 60.32
MS-3420-12 15.87 18.80 26.23 56.20
MS-3420-16 19.05 23.54 26.39 53.97
MS-3420-20 23.80 31.50 40.41 50.80
MS-3420-24 31.75 34.67 46.79 47.62
AB C DE Rad
in inches
F Rad
in inches
All dimensions are in mm
0.79
0.79
1.59
1.59
1.59
1.59
1.59
1.59
0.79
0.79
1.59
1.59
1.59
1.59
1.59
1.59
1.59
Other Accessories
Plain flat gasket
For MS and 97B flange mounted receptacles
All dimensions are in mm
Part number
MS-101000 10SL 15.90 25.40 4.35
4.35
4.35
4.35
5.15
5.15
5.15
5.15
5.15
5.55
5.55
5.55
27.80
30.15
32.50
34.90
38.10
41.20
44.45
50.80
57.15
63.50
69.85
18.26
20.62
23.01
24.61
27.00
29.36
31.75
34.90
39.70
44.45
49.22
55.77
19.05
22.20
25.40
28.57
31.75
34.90
38.10
44.45
50.80
55.57
61.92
12S & 12
14S & 14
16S & 16
18
20
22
24
28
32
36
40
MS-108686
MS-101001
MS-101002
MS-101003
MS-101004
MS-101005
MS-108687
MS-101007
MS-110831
MS-101006
MS-108688
Shell size A max B C D T
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
B
D
4 HOLES
O
A
A
C
C
O
T
AMPHENOL
31
MS And 97B Series
B MAX
C MAX
A
E
D
MS Part number Shell size A Thread in inches B C D E
MS 10S-1-SL 5/8-24 11.11
11.11
11.11
11.11
11.11
11.11
11.11
12.7
12.7
12.7
12.7
11.11
20.7 3.6
3.6
3.6
3.6
3.6
4.4
4.4
4.4
4.4
4.8
4.8
4.8
102
MS 12-12S 3/4- 20 25.4 115
28.6 115
30.2 115
34.1 115
37.3 127
40.4 127
43.6 140
50 197
62.7 197
69 197
56.3 197
MS 14-14S
7/8-20
MS 16-16S 1-20
MS 18 1 1/8-18
MS 20 1 1/4-18
MS 22 1 3/8-18
MS 24 1 1/2-18
MS 28 1 3/4-18
MS 32 2-18
MS 36 2 1/4-18
MS 40 2 1/2-16
All dimensions are in mm
Protective Cap For MS Series
MS-25043
For receptacles Has internal threads and is used on all receptacles. Gasket is provided in the dust cap forming a watertight seal.
Notes : 1.
2.
3.
4.
For protective caps with nylon cord, contact factory.
Standard - Plating is Cad. For alternative finishes, contact factory.
Standard - straight knurling. For diamond knurling on caps, contact factory.
Please add 07 suffix for bigger end link.
MS 25043-10D
MS 25043-12D
MS 25043-14D
MS 25043-16D
MS 25043-18D
MS 25043-20D
MS 25043-22D
MS 25043-24D
MS 25043-28D
MS 25043-32D
MS 25043-36D
MS 25043-40D
B MAX
C MAX
A
E
D
MS Part number Shell size A Thread in inches B C D E
MS 10S-1-SL 5/8-24 16.67 17.4 4 102
MS 12-12S 3/4- 20 21.4 20.6 4 115
21.4 23.7 4 115
21.4 26.9 4 115
21.4 30 4 115
21.4 33 4.8 127
21.4 36.4 4.8 127
21.4 39.6 4.8 140
21.4 46 4.8 197
21.4 58.7 5.6 197
21.4 65 5.6 197
21.4 52 5.6 197
MS 14-14S
7/8-20
MS 16-16S 1-20
MS 18 1 1/8-18
MS 20 1 1/4-18
MS 22 1 3/8-18
MS 24 1 1/2-18
MS 28 1 3/4-18
MS 32 2-18
MS 36 2 1/4-18
MS 40 2 1/2-16
All dimensions are in mm
Other Accessories
Protective cap for MS series
MS-25042
For plugs Has external threads and is used on all plugs where a coupling ring is provided.
MS 25042-10D
MS 25042-12D
MS 25042-14D
MS 25042-16D
MS 25042-18D
MS 25042-20D
MS 25042-22D
MS 25042-24D
MS 25042-28D
MS 25042-32D
MS 25042-36D
MS 25042-40D
AMPHENOL
Protective Cap For 97B Series
97B-25043
For Receptacle
SHELL
SIZE
'D'
+ 0.60/-0
'A'
MAX.
'E'
MIN.
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
40
23.0
30.0 16.0
20.70
4.30
5.50
32.50
37.0
40.50
43.50
47.0
54.0
60.50
67.0
73.0
90.0
100.0
115.0
160.0
'B'
+ 0.20
All dimensions are in mm
INK MARK A CONN. NO. &
BATCH CODE AS PER BOM.
'D'
'B'
+ ONE LINK
'E'
'A'
MS And 97B Series
32
Other Accessories
Protective cap for 97B series
97B-25042
For Plugs
All dimensions are in mm
'D'
'B'
+ ONE LINK
'E'
'A'
SHELL
SIZE
'B'
MAX.
'D'
+ 0.60/-0
'A'
MAX.
'E'
MIN.
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
40
21.0
27.50 23.50
31.50
4.30
5.50
30.0
33.50
37.0
40.0
43.0
49.50
56.0
62.50
73.0
90.0
100.0
115.0
130.0
190.0
INK MARK A CONN. NO. &
BATCH CODE AS PER BOM.
4.70
AMPHENOL
Note :- Please add 07 suffix for bigger end link. Applicable for Jam Nut
33
A
BE
D F MAX
C G
O O
Other Accessories
Dummy receptacle
MS-3105
All dimensions are in mm
Note: The dash number also indicates shell size.
D
Thread
in inches
E F G
max.
CBA
Part number
(see note)
MS-3105-10S 25.4 18.26 3.05 5/8-24 14.27 3.96 8.20
11.43
11.43
13.36
13.36
16.41
16.41
18.03
23.54
25.93
29.21
34.67
46.56
3.96
3.96
3.96
3.96
3.96
3.96
5.16
5.16
5.16
5.16
5.16
9.11
14.27
14.27
14.27
19.05
19.05
19.05
19.05
19.05
19.05
20.62
20.62
22.2
3/4-20
3/4-20
7/8-20
7/8-20
1-20
1-201-20
1 1/8-18
1 1/4-18
1 3/8-18
1 3/4-18
2 1/4-16
1 1/2-18
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
3.73
4.39
20.62
20.62
23.01
23.01
24.61
24.61
26.97
29.36
31.75
34.92
39.67
49.22
27.79
27.79
30.17
30.17
32.54
32.54
34.92
38.10
41.27
44.45
50.8
63.5
MS-3105-12S
MS-3105-12
MS-3105-14S
MS-3105-14
MS-3105-16S
MS-3105-16
MS-3105-18
MS-3105-20
MS-3105-22
MS-3105-24
MS-3105-28
MS-3105-36
For special accessories, please contact factory with specifications and drawings.
Amphenol has in-house capability to meet and custom build your special
accessories requirements for its range of MIL-C5015 MS and 97B series connectors.
Special Accessories
MS And 97B Series
AMPHENOL
MS/97B Connector- Accessories
Crimp contact
Contacts for MS/97B connectors are machined from copper alloys and silver plated for maximum corrosion
resistance, with a minimum millivolt drop and a maximum current carrying capacity; the size 16 and 12 socket
contacts are of the closed entry design. Gold plated contacts are also available.
* Solder contacts are not sold as separate items. Part numbers shown here are for crimp contacts only.
** When using wire adapter sleeve shown.
*** Contact rating as stated are test ratings only. The connecter may not withstand full rated current through all
contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors.
This is left entirely in the designer`s hands as he can best determine which peak voltage, switching surges,
transients, etc. can be expected in a particular circuit.
When proprietary crimp contacts are employed rather than the standard MS
approved solder contacts, the following application tools are recommended for use.
There is a possibility of additional crimping tools other than those included being
available at present or in the future for this specific application.
TOOLING CHART
Crimping
Tool
M22520/1-01
M22520/1-01
**
**
**
Positioner/
Turret
*
*
**
**
**
MS/97B
Application tools
Connectors
* Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
† Tools used with Arbor Press 11-7364
Part Number
For Crimp Contacts
only*
Pin/
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Socket
Mating End
Size
16 Short
16 Long
12
8
4
0
Wire Barrel
Size
16
16
12
8
4
0
Allowable
Wire size
16
18
60
22**
16
18
20
22**
12
14
8
10**
4
6**
0
1
2**
Test Current***
Amps
13
10
7.5
5
13
10
7.5
5
23
17
46
33
80
60
150
125
†
34
MS And 97B Series
MS-106433
MS-108456
MS-108295
MS-108457
MS-108388
MS-110262
MS-108386
MS-108387
MS-108384
MS-111878
MS-112067
MS-112068
Insertion/Removal
Tool
97B-IR-16
97B-IR-16
97B-IR-12
97B-IR-8
97B-IR-4
97B-IR-0
AMPHENOL
35
PC- Premating
contact designation
See pages 8 to 18
Alternate positions
W - X - Y - Z
(No suffix - Normal)
See insert orientations on page 6.
MS 3 100 A-
- - - - -18 19 P PCW
3 - Solder
4 - Crimp
To obtain the specific connector required, write down the connector number from the typical example below. Only inserts
shown in the availability chart shown on page 7 can be specified. Connectors are delivered with protective plastic dust
covers. Include premating contact designation only if premating contact is required. The second letter in the premating
contact designation stands for the actual contact position. B at the end of the connector number indicates telescopic
bushing provided.
MS/97B Series Connectors
MS - Threaded version
97B - Bayonet version
Series designation
Insert arrangement
See pages 7 to 18
Shell size
10S, 10SL, 12S, 12, 14S,
14, 16S, 16, 18, 20, 22,
24, 28, 32, 36.
Standard - Cadmium
plating with olive drab
chromate finish
Alternate finishes
1. Cadmium free zinc-
cobalt plating with
olive drab chromate
finish-622
2. Cadmium free zinc-
cobalt plating with
black finish (624)
3. Electroless Nickel
plating(A23)
4. 608:- Black Anodized
For details contact factory.
Shell finish
Contact type
P - Pin contacts
S - Socket contacts
Standard - Silver plating
Note : Contact factory for gold
plating part number.
Note:- Connector 3103 supplied in two types. Connector with rear end thread to accept backshell & without rear end thread. To order
3103 without rear end thread do not add any connector class such as( A,E,F,R...) & hence it is similar to 3102 with Back Box mount
For e.g 97B-3103-18-1P-622 Connector without thread
MS And 97B Series
Shell style
100 - Wall mounting
receptacle
Cable connecting
receptacle
Back box mounting receptacle
without rear end thread
Box mounting
receptacle
101 -
102 -
103 -
Straight plug
90 plug
106 -
108 -
0
-
105A
107R
- Jam nut Receptacle
107T Jam nut Receptacle with
threads to accept accessories
Plug suitable for right angle
back shell to interlock
107A
Plug without accessories,
suitable only of straight
accessories
-
-
-
Connector class
A-
F
R
Solid backshell. Applicable to straight plug
Environment resisting with grommet
seal and strain relief backshell. 3106F
style includes a front gasket seal
Environment resisting with grommet
seal, lightweight, shorter overall length
Straight PG threaded backshells
Supplied with different diameter sizes to
suit varying Cable sizes, used for
unshielded cable
Backshell for heat shrinkable end shell
Backshell for shielding & heat Shrinkable
end shells
Backshell with metal ferrule for shielded cable
Backshell without metal ferrule for unshielded
cable
PG
G
SQ
EGM -
PHM -
-
-
-
-
-
For 97B - Connector Modification
F 42 - Less grommet & backshell
F0/LC - Less contacts
563 - Gold plated contacts
T 00 - Metric threads in flange holes
97 BS - Bayonet Version with Steel wear pin (for receptacle connector)
RFI - Plug connector with grounding finger
HD - Heavy duty coupling ring
AMPHENOL
103X Back box mounting receptacle
with rear end thread to accept
accessory (Replace X by
required connector class)
-
36
Notes :
MS And 97B Series
Notice : All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances,
Amphenol reserves the right to change specifications without notice. This publication ACR11 0601 01/10 MS AND 97B Series
Connectors supercedes all existing Amphenol literature on MS AND 97 B Series Connectors.
AMPHENOL
www.czarcontent.com
www.amphenol-in.com
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91- 020 - 30688303, 30688304
Fax : 91 - 020 - 30688321
Email : vbhavsar@amphenol-in.com
sales@amphenol-in.com
Export
105, Bhosari Industrial Area,
Pune - 411 026, India.
Tel.: 91- 20 - 30688305, 30688353
Fax : 91- 20 - 27129158
Email : svpatil@amphenol-in.com
4931, 11th Floor, High Point IV
45, Palace Road, Bangalore 560 001.
Tel.: 91-80-22281392, 22281002
Fax : 91-80-22253859
Email : kmanoj@amphenol-in.com
MARKETING HEAD
QUARTERS Southern Region Northern and Eastern Region
1414, 14th Floor, Chiranjiv Tower,
43, Nehru Place, New Delhi - 110 019.
Tel. : 91-11-26449177
Telefax : 91-11-26449176
Email : sunily@amphenol-in.com
107, 1st Floor, ‘Am Sri Classic’,
Sarojinidevi Road, Secunderabad-500 003.
Telefax : 91- 40-66332906
Email : pprasad@amphenol-in.com
Central Region
105, Bhosari Industrial Area,
Pune - 411 026.
Tel.: 91- 20 - 27119735, 30688334
Fax: 91- 20 - 27120581, 27119735
Email : sunilp@amphenol-in.com
Western Region
Our offices in India:
Pune Operations Bangalore Operations
