19-223/R7BHC-A30/2T - Everlight International Corp.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Technical Data Sheet

Chip LED with Bi-Color(Multi-Color)

19-223/R7BHC-A30/2T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Multi-color type.

․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 19-223 SMD Taping is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Type Material Emitted Color Lens Color

R7 AlGalnP Dark-Red

BH InGaN Blue Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Package Outline Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Dar

k

-Re

d

Blue

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage V

R

5 V

Forward Current I

F

25 mA

Peak Forward Current

(Duty 1/10 @1KHz) I

FP

R7:60

BH:100 mA

Power Dissipation Pd R7:60

BH:110 mW

Electrostatic Discharge(HBM) ESD R7:2000

BH:150 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Electro-Optical Characteristics (Ta=25℃)

Parameter

Symbol

Min. Typ. Max. Unit

Condition

Luminous Intensity Iv

R7

BH

45.0

36.0

----

112

90.0 mcd

Viewing Angle 2θ1/2

----- 130 ----- deg

Peak Wavelength λp

R7

BH

----- 639

468 ----- nm

Dominant

Wavelength

λd

R7

BH

-----

631

470

-----

nm

Spectrum Radiation

Bandwidth

△λ

R7

BH

----- 20

35

----- nm

Forward Voltage V

F

R7

BH

1.7

2.7

2.0

3.3

2.4

3.7 V

I

F

=20mA

Reverse Current I

R

R7

BH

----- ----- 10

50 μA

V

R

=5V

Note:

1.Tolerance of Luminous Intensity ±10%

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

R7

Bin Range Of Luminous Intensity

Bin Min Max Unit Condition

P 45.0 72.0

Q 72.0 112

mcd I

F

=20mA

BH

Bin Range Of Luminous Intensity

Bin Min Max Unit Condition

1 36.0 57.0

2 57.0 90.0

mcd I

F

=20mA

Note:

1.Tolerance of Luminous Intensity ±10%

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Typical Electro-Optical Characteristics Curves

R7

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Typical Electro-Optical Characteristics Curves

BH

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

xxxxxx

xxxxxxxxxxxx

xxxx

xxxxxxxx

RoHS

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 11 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD.

19-223/R7BHC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 12 of 12

Device No:SZDSE-192-A32 Prepared date: 8-Dec-2006 Prepared by:Lu zhongwei

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of the

hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com