MHP10-05D05 - Artesyn Technologies, Inc.

OUTPUT SPECIFICATIONS

Voltage adjustability See Note 3 ±10%

Line regulation LL to HL, all outputs ±0.1%

Load regulation ML to FL

Single outputs ±0.1%

Dual outputs ±1.0%

Cross regulation Asymmetrical load 5.0% max.

25% / 100% FL

Voltage accuracy ±2.0%

Minimum load 2.1V, 3.3V, 5V 50mA max.

Single 12V, 15V 80mA max.

Duals: each output 10% FL

Overshoot At start-up 3.0% max.

Ripple and noise 20MHz bandwidth 1.5% pk-pk, max.

20mV rms

Transient response 25% load step ±10% typ. max. dev.,

0.5ms recovery

to within ±1.0%

Temperature coefficient ±0.02%/°C

Short circuit protection Hiccup mode Continuous

See Note 5 automatic recovery

INPUT SPECIFICATIONS

Input voltage range 5VDC, nominal, FL 4.5 to 9VDC

12VDC nominal, FL 9 to 18VDC

24VDC nominal, FL 18 to 36VDC

48VDC nominal, FL 36 to 72VDC

Input filter Pi filter

Input current See table

Input reflected ripple Single output 200mA

Dual outputs 200mA

Start-up time 500ms

MHP10 SERIES

Single and dual output

[ 2 YEAR WARRANTY ]

• 2 x 1 x 0.4 inch package

• 12.5 Watts/in3power density

• 32 models including 3.3VDC and 2.1VDC

• Designed to meet EN60950

• Indefinite short circuit protection

• Optional remote ON/OFF

• Optional trim output

The MHP10 series of DC/DC converters, comprising 32 different models, has

been designed for a wide range of applications including communications,

industrial systems and mobile battery powered systems. Packing 10 Watts of

power into a 2 x 1 x 0.4 inch package, with efficiencies as high as 80% the

MHP10 has wide input ranges of 4.5-9VDC, 9-18VDC, 18-36VDC and 36-

72VDC and is available in both single and dual output versions. Other features

include indefinite short circuit protection with automatic recovery and remote

on/off, all of which minimize the need for external circuitry and make the MHP10

a recommended component in distributed power systems.

SPECIFICATION

All specifications are typical at nominal input, full load at 25°C unless otherwise stated

PAGE 1

INPUT SPECIFICATIONS CONTINUED

Remote ON/OFF

Logic compatibility CMOS/TTL, See Note 4

ON 3.5VDC min. or open

OFF 0.8VDC max.

GENERAL SPECIFICATIONS

Efficiency 78% typ.

Isolation voltage Input/output 500VDC

Isolation capacitance Input/output 1nF

Switching frequency Fixed 200 to 275kHz

Approvals and Safety VDE0805, EN60950, IEC950

standards (pending) UL1950, CSA C22.2 No. 950

Case material Black coated, metal case

Material flammability UL94V-0

Weight 27g (0.95oz)

MTBF MIL-HDBK-217F 300,000 hours

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient -25°C to +60°C

(See derating curve)

Extended temp., -40°C to +60°C

option, See Note 1

Non-operating amb. -40°C to +95°C

Case +95°C max.

Derating See derating curve

Cooling Free air convection cooled

Relative humidity Non-condensing 30% to 95%

Altitude Operating 10,000 feet max.

Non operating 40,000 feet max.

Vibration 5Hz to 500Hz 2.5G rms (approx.)

INPUT OUTPUT OUTPUT INPUT TYPICAL REGULATION (TYP.) MODEL NUMBER

VOLTAGE VOLTAGE CURRENT CURRENT EFFICIENCY LINE LOAD

4.5-9VDC 2.1V 2000mA 1400mA 60% ±0.1% ±0.1% MHP10-05S2V1 (2)

4.5-9VDC 3.3V 2000mA 2095mA 63% ±0.1% ±0.1% MHP10-0533V3 (2)

4.5-9VDC 5.0V 1400mA 2058mA 62% ±0.1% ±0.1% MHP10-05S05 (2)

4.5-9VDC 12V 580mA 1856mA 75% ±0.1% ±0.1% MHP10-05S12 (2)

4.5-9VDC 15V 460mA 1769mA 78% ±0.1% ±0.1% MHP10-05S15 (2)

4.5-9VDC ±5.0V ±600mA 1764mA 68% ±0.1% ±1.0% MHP10-05D05 (2)

4.5-9VDC ±12V ±290mA 1784mA 78% ±0.1% ±1.0% MHP10-05D12 (2)

4.5-9VDC ±15V ±230mA 1769mA 78% ±0.1% ±1.0% MHP10-05D15 (2)

9-18VDC 2.1V 2000mA 583mA 60% ±0.1% ±0.1% MHP10-12S2V1

9-18VDC 3.3V 2000mA 753mA 73% ±0.1% ±0.1% MHP10-12S3V3

9-18VDC 5.0V 2000mA 1068mA 78% ±0.1% ±0.1% MHP10-12S05

9-18VDC 12V 800mA 1025mA 78% ±0.1% ±0.1% MHP10-12S12

9-18VDC 15V 660mA 1068mA 78% ±0.1% ±0.1% MHP10-12S15

9-18VDC ±5.0V ±600mA 704mA 71% ±0.1% ±1.0% MHP10-12D05

9-18VDC ±12V ±400mA 1025mA 78% ±0.1% ±1.0% MHP10-12D12

9-18VDC ±15V ±300mA 1068mA 78% ±0.1% ±1.0% MHP10-12D15

18-36VDC 2.1V 2000mA 291mA 60% ±0.1% ±0.1% MHP10-24S2V1

18-36VDC 3.3V 2000mA 376mA 73% ±0.1% ±0.1% MHP10-24S3V3

18-36VDC 5.0V 2000mA 534mA 78% ±0.1% ±0.1% MHP10-24S05

18-36VDC 12V 800mA 512mA 78% ±0.1% ±0.1% MHP10-24S12

18-36VDC 15V 660mA 528mA 78% ±0.1% ±0.1% MHP10-24S15

18-36VDC ±5.0V ±600mA 347mA 71% ±0.1% ±1.0% MHP10-24D05

18-36VDC ±12V ±400mA 512mA 78% ±0.1% ±1.0% MHP10-24D12

18-36VDC ±15V ±300mA 528mA 78% ±0.1% ±1.0% MHP10-24D15

36-72VDC 2.1V 2000mA 145mA 60% ±0.1% ±0.1% MHP10-48S2V1

36-72VDC 3.3V 2000mA 180mA 73% ±0.1% ±0.1% MHP10-483V3

36-72VDC 5.0V 2000mA 267mA 78% ±0.1% ±0.1% MHP10-48S05

36-72VDC 12V 800mA 256mA 78% ±0.1% ±0.1% MHP10-48S12

36-72VDC 15V 660mA 264mA 78% ±0.1% ±0.1% MHP10-48S15

36-72VDC ±5.0V ±600mA 176mA 77% ±0.1% ±1.0% MHP10-48D05

36-72VDC ±12V ±400mA 256mA 78% ±0.1% ±1.0% MHP10-48D12

36-72VDC ±15V ±300mA 264mA 78% ±0.1% ±1.0% MHP10-48D15

Output Power (%)

0°C20°C 40°C 60°C 80°C 100°C 120°C

-25°C

90°C

DERATING CURVE

Output Power (Watts)

60°C

100%

Ambient Temperature (°C)

Notes

1 Extended operating temperature range is available as an option. To

specify a MHP10 that operates down to -40°C, add the suffix ‘-4’ to the

model number, e.g. MHP10-24S05-4.

2 5VDC input, max. 7 Watt output power.

3 External trimming of the output voltage is optional on the single output

units, add the suffix ‘-T’ to the end of the model number,

e.g. MHP10-05S05-T.

4 Remote on/off is available as an option, add the suffix ‘-S’ to the end of

the model number, e.g. MHP10-24D15-S.

5 5VDC in max. for 1 minute.

10 Watt

Wide input DC/DC converters

DC/DC CONVERTERS |

10W DC/DC

PAGE 2

http://www.artesyn.com

BOTTOM VIEW

Ø 0.04 Dia.

(1.02)

0.24

(6.10)

0.80

(20.30)

2.00

(50.80)

ALL DIMENSIONS IN INCHES (mm)

Tolerance : ±0.008 (0.2) max. on pin placement

±0.02 (0.5) max. on outer dimensions

54 3

0.40

(10.20)

1.00

(25.40)

0.30

(7.60)

0.40

(10.16)

621

0.60

(15.20)

0.60

(15.20)

0.40

(10.20)

0.10

(2.50) 0.10

(2.50)

0.20

(5.10)

0.40

(10.20) 0.40

(10.20)

DC/DC CONVERTERS |

10W DC

PAGE 3

10 Watt

Wide input DC/DC converters

10W DC/DC

|DC/DC CONVERTERS

10KΩ

TRIMPOT

TRIM

DOWN

PIN CONNECTIONS

PIN NUMBER SINGLE OUTPUTS DUAL OUTPUT

1 + Input + Input

2 - Input - Input

3 + Output + Output

4 N.C./Trim (Option) Common

5 - Output - Output

6 Control (Option) Control (Option)

EXTERNAL OUTPUT TRIMMING

Single output models can be externally trimmed

by ±10% using either method shown below.

DS_MHP10_19980401.PDF