Vishay General Semiconductor
SS29 & SS210
Document Number 88749
02-May-06
www.vishay.com
1
DO-214AA (SMB)
High Voltage Surface Mount Schottky Rectifier
FEATURES
• Low profile package
• Ideal for automated placement
• Guardring for overvoltage protection
• Low power losses, high efficiency
• Low forward voltage drop
• High surge capability
• Meets MSL level 1, per J-STD-020C
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in low voltage high frequency inverters,
freewheeling, dc-to-dc converters, and polarity
protection applications.
MECHANICAL DATA
Case: DO-214AA (SMB)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: Color band denotes the cathode end
MAJOR RATINGS AND CHARACTERISTICS
IF(AV) 1.5 A
VRRM 90 V, 100 V
IFSM 75 A
VF0.71 V
Tj max. 150 °C
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL SS29 SS210 UNIT
Device marking code S9 S10
Maximum repetitive peak reverse voltage VRRM 90 100 V
Maximum RMS voltage VRMS 63 70 V
Maximum DC blocking voltage VDC 90 100 V
Maximum average forward rectified current (see Fig. 1) IF(AV) 1.5 A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load IFSM 75 A
Peak repetitive reverse surge current at tp = 2 µs, 1 kHz IRRM 1.0 A
Voltage rate of change (rated VR) dv/dt 10000 V/µs
Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C
www.vishay.com
2
Document Number 88749
02-May-06
Vishay General Semiconductor
SS29 & SS210
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
Note:
(1) P.C.B. mounted with 0.2 x 0.2" (5.0 x 5.0 mm) copper pad areas
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL SS29 SS210 UNIT
Maximum instantaneous forward
voltage at: (1)
IF = 0.1 A,
IF = 1.0 A,
IF = 3.0 A,
IF = 1.5 A,
IF = 3.0 A,
TA = 25 °C
TA = 25 °C
TA = 25 °C
TA = 100 °C
TA = 100 °C
VF
0.43
0.75
0.95
0.71
0.85
V
Maximum DC reverse current
at rated VR (1)
TA = 25 °C
TA = 100 °C IR
30
5
µA
mA
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL SS29 SS210 UNIT
Maximum thermal resistance (1) RθJA
RθJL
85
25 °C/W
ORDERING INFORMATION
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
SS210-E3/52T 0.096 52T 750 7" Diameter Plastic Tape & Reel
SS210-E3/5BT 0.096 5BT 3200 13" Diameter Plastic Tape & Reel
Figure 1. Forward Current Derating Curve
0
0.5
1
1.5
2
0 25 50 75 100 125 150
Average Forward Current (A)
Lead Temperature (°C)
Resistive or Inductive Load
P.C.B. Mounted on
0.2 x 0.2" (5.0 x 5.0 mm)
Copper Pad Areas
Figure 2. Forward Power Loss Characteristics
0
0.5
1.0
1.5
2.0
2.5
00.40.81.2 1.6 2.0 2.4 2.83.2 3.6
D = tp/T tp
T
D = 0.1
D = 0.2
D = 0.3
D = 0.5
D = 0.8
D = 1.0
Average Forward Current (A)
Average Power Loss (W)
Document Number 88749
02-May-06
www.vishay.com
3
SS29 & SS210
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Figure 3. Maximum Non-Repetitive Peak Forward Surge Current
Figure 4. Typical Instantaneous Forward Characteristics
0
25
50
75
100
110100
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
0.1
1
10
100
0 0.2 0.4 0.6 0.81.0 1.2 1.4
T
J
= 150 °C
T
J
= 125 °C
T
J
= 25 °C
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
Figure 5. Typical Reverse Leakage Characteristics
Figure 6. Typical Junction Capacitance
0.1
1
10
100
1000
10000
10 20 30 40 50 60 70 8090100
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (mA)
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
10
100
1000
0.1 1 10 100
Reverse Voltage (V)
Junction Capacitance (pF)
0.160 (4.06)
0.180 (4.57)
0.006 (0.152)
0.012 (0.305)
0.030 (0.76)
0.060 (1.52)
0.205 (5.21)
0.220 (5.59)
0 (0)
0.008 (0.2)
0.130 (3.30)
0.155 (3.94)
0.084 (2.13)
0.096 (2.44)
0.077 (1.95)
0.086 (2.20)
Cathode Band
DO-214AA (SMB)
0.085 MAX.
(2.159 MAX.)
0.220 REF
0.086 MIN.
(2.18 MIN.)
0.060 MIN.
(1.52 MIN.)
Mounting Pad Layout
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
