39
Film Chip Capacitors
PPS DIELECTRIC – CB Series
GENERAL DESCRIPTION
Film chip capacitor using a naked and stacked construction with
metallized PolyPhenylene Sulfide film (PPS)
ADVANTAGES
• Applicable for both flow and reflow soldering.
• Very constant Capacitance value with temperature.
• Low dielectric absorption.
• The intrinsic elasticity of the dielectric film provides an
excellent compatibility of the capacitor with all types of
material for printed circuit boards.
• Excellent thermal shock resistance.
• Low dissipation factor, ESR and ESL.
• No piezoelectric effect.
• Available in tape and reel suitable for automatic placement.
• Non-polar construction.
APPLICATIONS
General purpose function in low voltage applications:
• Filtering, coupling, decoupling
• Time-constant
• Oscillation timing circuit
Typical applications would be:
• Automotive (navigation system ...)
• Telecom (GSM PLL circuit, ADSL system ...)
• Industrial (Lighting and power supplies...)
PERFORMANCE CHARACTERISTICS
Climatic Category 55/125/56
Capacitance Range 1nF to 180nF
Tolerance on CR±2%, ±5%, ±10%
Nominal Voltages 16Vdc to 50Vdc
Test Voltage 1.4Vr 2 sec. at 25°C
Soldering methods IR vapor phase reflow
Tangent of Loss Angle at 1kHz (DF)
< 50 x 10-4
Insulation resistance minimum: IR for C ≤ 0.33F IR > 1000 M at 20°C
for 1 min. charge at 10VDC for VR < 100VDC
Temperature range -55°C to 125°C
A.C. applications for high frequency A.C. application please check with AVX
No self-healing properties
Outer Layer
Termination Plating :
100% matte Sn
Ni Barrier Under
Termination
Silver Epoxy
Resin
Brass
Active Layers : PPS dielectric
40
Film Chip Capacitors
PPS DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
VOLTAGE Vdc: 16V Vac: 10V
Capacitance
Chip Dimensions Reel
Range Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Pkg
(CR) Code (page 6) Code
L W H max T W P1 K0 A W1 W2 max Bulk Reel
0.001µF CB018B0102+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0012 CB018B0122+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0015 CB018B0152+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0018 CB018B0182+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0022 CB018B0222+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0027 CB018B0272+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0033 CB018B0332+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0047 CB018B0472+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0056 CB018B0562+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0068 CB018B0682+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0082 CB018B0822+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.010µF CB018B0103+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.012 CB018B0123+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.015 CB018B0153+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.018 CB018B0183+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.022 CB018B0223+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.027 CB018B0273+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.033 CB018B0333+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.039 CB018B0393+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.047 CB028B0473+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.40 14.4 2000 2500 BA
(0.130) (0.098) (0.071) (0.020) (0.315) (0.158) (0.075) (7.087) (0.331) (0.567)
0.056 CB028B0563+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.40 14.4 2000 2500 BA
(0.130) (0.098) (0.098) (0.020) (0.315) (0.158) (0.075) (7.087) (0.331) (0.567)
0.068 CB028B0683+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.40 14.4 2000 2500 BA
(0.130) (0.098) (0.071) (0.020) (0.315) (0.158) (0.075) (7.087) (0.331) (0.567)
0.082 CB028B0823+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.40 14.4 2000 2500 BA
(0.130) (0.098) (0.071) (0.020) (0.315) (0.158) (0.075) (7.087) (0.331) (0.567)
For other Values: upon request
Replace the + by the tolerance code: G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
millimeters (inches)
W
L
H
T
41
Film Chip Capacitors
PPS DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
VOLTAGE Vdc: 16V Vac: 10V
Capacitance
Chip Dimensions Reel
Range Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Pkg
(CR) Code (page 6) Code
L W H max T W P1 K0 A W1 W2 max Bulk Reel
0.100µF CB028B0104+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.4 14.4 2000 2500 BA
(0.130) (0.098) (0.071) (0.020) (0.315) (0.158) (0.075) (7.087) (0.331) (0.567)
0.120 CB038B0124+ -- 4.50 3.20 2.30 0.60 12.0 8.00 2.60 180 12.4 18.4 1500 900 BA
(0.177) (0.126) (0.091) (0.024) (0.472) (0.315) (0.102) (7.087) (0.488) (0.724)
4.50 3.20 2.30 0.60 12.0 8.00 2.60 330 12.4 18.4 1500 3600 BC
(0.177) (0.126) (0.091) (0.024) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
0.150 CB038B0154+ -- 4.50 3.20 2.30 0.60 12.0 8.00 2.60 180 12.4 18.4 1500 900 BA
(0.177) (0.126) (0.091) (0.024) (0.472) (0.315) (0.102) (7.087) (0.488) (0.724)
4.50 3.20 2.30 0.60 12.0 8.00 2.60 330 12.4 18.4 1500 3600 BC
(0.177) (0.126) (0.091) (0.024) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
0.180 CB038B0184+- - 4.50 3.20 2.50 0.60 12.0 8.00 2.60 180 12.4 18.4 1500 900 BA
(0.177) (0.126) (0.098) (0.024 ) (0.472) (0.315) (0.102) (7.09) (0.488) (0.724)
4.50 3.20 2.50 0.60 12.0 8.00 2.60 330 12.4 18.4 1500 3600 BC
(0.177) (0.126) (0.098) (0.024 ) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
VOLTAGE Vdc: 50V Vac: 40V
0.001µF CB018D0102+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0012 CB018D0122+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0015 CB018D0152+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.147) (7.087) (0.331) (0.567)
0.0018 CB018D0182+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0022 CB018D0222+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0027 CB018D0272+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0033 CB018D0332+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0047 CB018D0472+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0056 CB018D0562+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0068 CB018D0682+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.0082 CB018D0822+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.010µF CB018D0103+ -- 3.30 1.60 1.15 0.50 8.00 4.00 1.20 180 8.40 14.4 2000 3900 BA
(0.130) (0.063) (0.045) (0.020) (0.315) (0.158) (0.047) (7.087) (0.331) (0.567)
0.012 CB028D0123+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.40 14.4 2000 2500 BA
(0.130) (0.098) (0.071) (0.020) (0.315) (0.158) (0.075) (7.087) (0.331) (0.567)
0.015 CB028D0153+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.40 14.4 2000 2500 BA
(0.130) (0.098) (0.071) (0.020) (0.315) (0.158) (0.158) (7.087) (0.331) (0.567)
0.018 CB028D0183+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.40 14.4 2000 2500 BA
(0.130) (0.098) (0.071) (0.020) (0.315) (0.158) (0.075) (7.087) (0.331) (0.567)
0.022 CB028D0223+ -- 3.30 2.50 1.80 0.50 8.00 4.00 1.90 180 8.40 14.4 2000 2500 BA
(0.130) (0.098) (0.071) (0.020) (0.315) (0.158) (0.075) (7.087) (0.331) (0.567)
millimeters (inches)
For other Values: upon request
Replace the + by the tolerance code: G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
W
L
H
T
42
Film Chip Capacitors
PPS DIELECTRIC – CB Series
CAPACITANCE VALUES (CR) AND NOMINAL VOLTAGES (VR)
VOLTAGE Vdc: 16V Vac: 10V
Capacitance
Chip Dimensions Reel
Range Ordering *Tolerances Tape Dimensions Reel Dimensions Packaging Unit Pkg
(CR) Code (page 6) Code
L W H max T W P1 K0 A W1 W2 max Bulk Reel
0.027 CB028D0273+ -- 3.30 2.50 2.10 0.50 8.00 4.00 2.30 180 8.40 14.4 2000 2000 BA
(0.130) (0.098) (0.083) (0.020) (0.315) (0.158) (0.091) (7.087) (0.331) (0.567)
0.033 CB028D0333+ -- 3.30 2.50 2.10 0.50 8.00 4.00 2.30 180 8.40 14.4 2000 2000 BA
(0.130) (0.098) (0.083) (0.020) (0.315) (0.158) (0.091) (7.087) (0.331) (0.567)
VOLTAGE Vdc: 50V Vac: 40V
0.039 CB028D0393+ -- 3.30 2.50 2.1 0.50 8.00 4.00 2.30 181 8.40 14.4 2000 2000 BA
(0.130) (0.098) (0.083) (0.020) (0.315) (0.158) (0.091) (7.087) (0.331) (0.567)
0.047 CB038D0473+ -- 4.50 3.20 2.4 0.60 12.0 8.00 2.60 180 12.4 18.4 1500 900 BA
(0.1777) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (7.087) (0.488) (0.724)
4.50 3.20 2.4 0.60 12.0 8.00 2.60 330 12.4 18.4 1500 3600 BC
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
0.056 CB038D0563+ -- 4.50 3.20 2.40 0.60 12.0 8.00 2.60 180 12.4 18.4 1500 900 BA
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (7.087) (0.488) (0.724)
4.50 3.20 2.40 0.60 12.0 8.00 2.60 330 12.4 18.4 1500 3600 BC
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
0.068 CB038D0683+ -- 4.50 3.20 2.40 0.60 12.0 8.00 2.60 180 12.4 18.4 1500 900 BA
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (7.087) (0.488) (0.724)
4.50 3.20 2.40 0.60 12.0 8.00 2.60 330 12.4 18.4 1500 3600 BC
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
0.082 CB038D0823+ -- 4.50 3.20 2.40 0.60 12.0 8.00 2.60 180 12.4 18.4 1500 900 BA
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (7.087) (0.488) (0.724)
4.50 3.20 2.40 0.60 12.0 8.00 2.60 330 12.4 18.4 1500 3600 BC
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
0.100µF CB038D0104+ -- 4.50 3.20 2.40 0.60 12.0 8.00 2.60 180 12.4 18.4 1500 900 BA
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (7.087) (0.488) (0.724)
4.50 3.20 2.40 0.60 12.0 8.00 2.60 330 12.4 18.4 1500 3600 BC
(0.177) (0.126) (0.095) (0.024) (0.472) (0.315) (0.102) (12.99) (0.488) (0.724)
millimeters (inches)
For other Values: upon request
Replace the + by the tolerance code: G = 2%, J = 5% or K = 10%
Replace the -- by the packaging suffix: -- = bulk
BA or BC = tape & reel
W
L
H
T
43
Film Chip Capacitors
PPS DIELECTRIC – CB Series
MOUNTING AND SOLDERING RECOMMENDATIONS
RECOMMENDED SOLDER PASTE THICKNESS
For optimum solderability, the recommended soldering
paste thickness: 1206 to 1812 :150 to 200µm
In case of hand soldering, the temperature of the soldering
iron should not be above 250°C. Special care must be taken
to avoid touching the capacitor body with the iron tip.
RECOMMENDED CLEANING
To clean flux from the PC board assembly, the recommended
products are: ethanol, isopropyl alcohol, and deionized water
wash. The cleaning products to avoid are: Toluene, Xylene,
Trichloroethylene, Terpene Cleaner EC-7, surface active
agent. In case of using another solvent, please contact us.
OTHER CAUTIONS
Flame retardancy: the dielectric film is not a flame retardant
material.
Environment: contact us when chips are used in humid or
gas atmosphere and /or when using resin.
Recommended handling: do not use edged tools, so not
to damage the capacitors.
TIN WHISKERS TESTS : JEDEC STANDARD NO 22A121
Stress Type Ref. Spec. Test Conditions Analysis Results
Temperature cycling JESD22-A104 -55°C +85(+10/-0)°C air SEM x 1000 Pass
5 to 10 minutes soak 3 cycles/hour
Ambient Temperature / 30+/-2°C - 60+/-3% RH -2000H SEM x 1000 Pass
Humidity Storage
High Temperature / 70+/-5°C - 93+3/-2% RH -1000H SEM x 1000 Pass
Humidity Storage
Size Code Case Size A B C
01 1206 1.30 (0.051) 1.30 (0.051) 2.20 (0.087)
02 1210 2.00 (0.079) 1.30 (0.051) 2.20 (0.087)
03 1812 3.00 (0.118) 1.50 (0.059) 3.50 (0.137)
PAD DIMENSIONS: millimeters (inches)
A
CB
*Reflow soldering referring to JEDEC Standard with some limitations
*JEDEC J-Std 020C
SOLDERING PROFILE
The capacitors can be mounted using infrared and vapor phase soldering following recommended below.
They are NOT suitable for wave soldering.
All temperature refer to topside of the package, measured on the package body surface.
Profile Feature 1206 to 1812
Ramp-Up (Tsmax to Tp) 3°C / second max
Preheat
- Temperature Min (Tsmin) 150°C
- Temperature Min (Tsmax) 200°C
- Time (tsmin to tsmax) 180 sec. max
Time maintained above
- Temperature (TL) 217°C
- Time (tL) 90 sec. max
Peak temperature (Tp) 260°C
Time within 5°C of peak 10 sec.
temperature (tp)
Ramp-Down 6°C / sec.
030
Time (seconds)
Temperature (ºC)
60 90 120 150 180 210 240
Ramp
down
Ramp up
270 300 330
Tp
Tp - 5ºC
Ts min
Ts max
TL
tS
tp
tL
44
Film Chip Capacitors
PPS DIELECTRIC – CB Series
ELECTRICAL CHARACTERISTICS VERSUS TEMPERATURE AND FREQUENCY
ELECTRICAL CHARACTERISTICS
3
2
1
0
-1
-2
-3
DC/C (%)
Temp. (°C)
-75 -50 -25 0 25 50 75 100 125 150
-75 -50 -25 0 25 50 75 100 125 150
Temperature (°C)
RIS = f(F)
RIS (G.ohm)
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
10000
1000
100
10
1
50
45
40
30
25
20
15
10
5
0
TGTE=f(T)
-75 -50 -25 0 25 50 75 100 125 150
Temperature (°C)
TGTE=(10-4)
Capacitance
Dissipation Factor
Insulation Resistance
FREQUENCY CHARACTERISTICS
1 10 100 1000 10000
Frequency (kHz)
DC/C = f(F)
25
20
15
10
5
0
-5
DC/C (%)
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
1000 10000
Frequency (kHz)
Z = f(F)
10,000
1,000
0.100
0.010
Z (Ohms)
CB02 8B 0104 J
1 10 100 1000 10000
Frequency (kHz)
TGTE = f(F)
10
9
8
7
6
5
4
3
2
1
0
TGTE (%)
CB01 / 10NF
CB01 / 39NF
CB02 / 100NF
Capacitance
Dissipation Factor
Impedance
45
Film Chip Capacitors
PPS DIELECTRIC – CB Series
RMS VOLTAGE AND CURRENT VERSUS FREQUENCY
MAXIMUM VOLTAGE (VRMS) AND CURRENT (IRMS) VS FREQUENCY
Typical curves results from measurement carried out at ambient temperature (25ºC) and sinusoidal wave-forms
(for size CB01 to CB03)
15
13
10
8
5
3
0
1.E+02 1.E+03 1.E+04 1.E+05 1.E+06
Frequency (Hz)
Vrms (volts)
16Vdc
100nF
2.0
1.8
1.5
1.3
1.0
0.8
0.5
0.3
0.0
1.E+02 1.E+03 1.E+04 1.E+05 1.E+06
Frequency (Hz)
Irms (A)
16Vdc
100nF
45
40
35
30
25
20
15
10
5
0
1.E+02 1.E+03 1.E+04 1.E+05 1.E+06
Frequency (Hz)
Vrms (volts)
50Vdc
82nF
3.0
2.8
2.5
2.3
2.0
1.8
1.5
1.3
1.0
0.8
0.5
0.3
0.0
1.E+02 1.E+03 1.E+04 1.E+05 1.E+06
Frequency (Hz)
Irms (A)
50Vdc
82nF
16 Vdc 16 Vdc
50 Vdc 50 Vdc
46
Film Chip Capacitors
PPS DIELECTRIC – CB Series – RoHS
MATERIALS CONTROLLED BY ROHS (PPM BY WEIGHT):
Mass / unit (g) Lead Mercury Cadmium Hexavalent PBB PBDE
Chromium
CB range 000 0 00
RoHS Limit (ppm) 1000 1000 100 1000 1000 1000
Pass/Fail Pass Pass Pass Pass Pass Pass
This product has been tested and found to be compliant with all requirements, provisions, and exemptions of EU Directive 2002/95/EC of the European Parliament and
Council of January 27, 2003. On the Restriction of use of certain Hazardous Substances (RoHS) in electrical and electronic equipment and EU Directive 2000/53/EC
regarding ELV or End of Life Vehicle.
ROHS / ELV STATUS
External Plating
100% Matte Sn as standard
LEAD-FREE STATUS / MOISTURE
SENSITIVITY RANKING
Pb Free Reflow Solder compliant, MSL = 2a.
Reflow soldering referring to Jedec Standard with some
limitations. Additional JESD-97 data to be phased in MSL
e3 termination.
PRODUCT LABELING:
(For informational purposes only to be phased in on reel and
container.)
PRODUCT TRACEABILITY:
Full internal material traceability by reference to unique lot
number marked on reel and external package.
RoHS Compliant:
Pb Free: