3-162
Specifications HA-2544/883
Absolute Maximum Ratings Thermal Information
Voltage Between V+ and V- Terminals. . . . . . . . . . . . . . . . . . . . 35V
Differential Input Voltage (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . 6V
Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to V-
Peak Output Current (< 10% Duty Cycle) . . . . . . . . . . . . . . . .40mA
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V
Lead Temperature (Soldering 10s). . . . . . . . . . . . . . . . . . . . +300oC
Thermal Resistance θJA θJC
CerDIP Package . . . . . . . . . . . . . . . . . . . 115oC/W 28oC/W
Ceramic LCC Package . . . . . . . . . . . . . . 65oC/W 15oC/W
Metal Can Package. . . . . . . . . . . . . . . . . 155oC/W 67oC/W
Package Power Dissipation Limit at +75oC for TJ≤ +175oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870mW
Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.54W
Metal Can Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .645mW
Package Power Dissipation Derating Factor Above +75oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8.7mW/oC
Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . .15.4mW/oC
Metal Can Package. . . . . . . . . . . . . . . . . . . . . . . . . . . .6.5mW/oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Temperature Range. . . . . . . . . . . . . . . . -55oC to +125oC
Operating Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15V VINCM ≤ 1/2 (V+ - V-)
RL≥ 2kΩ
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY = ±15V, RSOURCE = 10Ω, RLOAD = 500kΩ, CLOAD ≤10pF, VOUT = 0V, Unless Otherwise Specified.
PARAMETERS SYMBOL CONDITIONS GROUP A
SUBGROUPS TEMPERATURE
LIMITS
UNITSMIN MAX
Input Offset Voltage VIO VCM = 0V 1 +25oC -15 15 mV
2, 3 +125oC, -55oC -20 20 mV
Input Bias Current +IBVCM = 0V,
+RS = 1kΩ,
-RS = 10Ω
1 +25oC -15 15 µA
2, 3 +125oC, -55oC -20 20 µA
-IBVCM = 0V,
+RS = 10Ω,
-RS = 1kΩ
1 +25oC -15 15 µA
2, 3 +125oC, -55oC -20 20 µA
Input Offset Current IIO VCM = 0V,
+RS = 1kΩ,
-RS = 1kΩ
1 +25oC-22µA
2, 3 +125oC, -55oC-3 3 µA
Common Mode
Range +CMR V+ = 5V, V- = -25V 1 +25oC10-V
2, 3 +125oC, -55oC10 - V
-CMR V+ = 25V, V- = -5V 1 +25oC - -10 V
2, 3 +125oC, -55oC - -10 V
Large Signal Voltage
Gain +AVOL VOUT = 0V and +8V,
RL = 1kΩ4 +25oC 3.5 - kV/V
5, 6 +125oC, -55oC 2.5 - kV/V
-AVOL VOUT = 0V and -8V,
RL = 1kΩ4 +25oC 3.5 - kV/V
5, 6 +125oC, -55oC 2.5 - kV/V
Common Mode
Rejection Ratio +CMRR ∆VCM = +10V,
V+ = +5V, V- = -25V,
VOUT = -10V
1 +25oC75-dB
2, 3 +125oC, -55oC75 - dB
-CMRR ∆VCM = -10V,
V+ = +25V, V- = -5V,
VOUT = +10V
1 +25oC75-dB
2, 3 +125oC, -55oC75 - dB
Output Voltage
Swing +VOUT RL = 1kΩ1 +25oC10-V
2, 3 +125oC, -55oC10 - V
-VOUT RL = 1kΩ1 +25oC - -10 V
2, 3 +125oC, -55oC - -10 V
Spec Number 511028-883