2JCIE-HARNESS-01 - OMRON

New Product

Sensor Evaluation Board

2JCIE-EV

Sensor evaluation board that

supports open platform

• Easily implement development of a new IoT system

that senses a wide variety of environmental information

Features

*1. Raspberry Pi is a registered trademark of the Raspberry Pi Foundation.

*2. Arduino is a registered trademark of Arduino LLC and Arduino SRL.

*3. Feather is a registered trademark of Adafruit Industries LLC.

*4. For details, see External Expansion Sensor on page 3.

RoHS compliant

Refer to Safety Precautions on Page 9.

Temperature, humidity, light,

barometric pressure, noise, acceleration Can be connected to a variety of sensors

(Raspberry Pi)

Raspberry Pi *1, Arduino *2, Feather *3

Easily develop sensing IoT applications and PoC

• Evaluation board with six types of sensing functions.

• The product can be connected to a Raspberry Pi *1, Arduino *2, or Feather *3 baseboard, and enables easy sensor

evaluation.

• The product can be connected to OMRON sensors (MEMS thermal sensor, MEMS flow sensor, Light convergent

reflective sensor, air quality sensor, etc.) and Qwiic sensors.

Can be connected to OMRON

sensors *4

Includes a connector that supports

Qwiic sensors.

Six types of

sensing functions

OMRON sensor evaluation board

Supports three platforms

Platform

Sample source code for acquiring sensor data is available on GitHub

2JCIE-EV

Ordering Information

Unit

Supported Accessories (Sold Separately)

*1. Raspberry Pi is a registered trademark of the Raspberry Pi Foundation.

*2. Arduino is a registered trademark of Arduino LLC and Arduino SRL.

*3. Feather is a registered trademark of Adafruit Industries LLC.

*4. Boards for supported platforms are not included.

*5. Do not use a model other than those listed in each table of platform supporting models.

Note: The temperature sensor on the sensor evaluation board may output a high value due to heat generated by the platform. If you need to

eliminate this effect, either separate the sensor from the unit by connecting a cable or otherwise, or use an external temperate/humidity

sensor that supports SparkFun Qwiic.

Ratings and Specifications

Specifications

Type Appearance Model Supported platform *4

Table of Models

RP type 2JCIE-EV01-RP1 Raspberry Pi *1 3 A/1 B+/2 B/3 B/3 B+/Zero/Zero W *5

AR type 2JCIE-EV01-AR1 Arduino *2 MKR Vidor 4000/MKR WiFi 1010/MKR ZERO *5

FT type 2JCIE-EV01-FT1 Feather *3 HUZZAH32 *5

Type Model

Cable harness

2JCIE-HARNESS-01

2JCIE-HARNESS-02

2JCIE-HARNESS-03

2JCIE-HARNESS-04

2JCIE-HARNESS-05

Model

Item 2JCIE-EV01-RP1 2JCIE-EV01-AR1 2JCIE-EV01-FT1

Protocol Pi HAT Shield for MKR form factor FeatherWing

Dimensions (mm) Approx. 65 x 30 Approx. 61.5 x 25 Approx. 50.8 x 23.9

Sparkfun Qwiic (3.3 V I2C) CN4 CN4 CN4

5V I2C for expansion CN5 CN5 CN5

TH1 TH1 TH1

5V UART for expansion CN6 CN6 CN6

5V DIO for expansion --- CN7, CN8 TH2

Sensing data that can be acquired Temperature, humidity, light, barometric pressure, noise, 3-axis acceleration

Absolute maximum rating: Power voltage (5 V) -0.2 to 5.5 V

Absolute maximum rating: Power voltage (3.3 V) -0.2 to 3.6 V

Absolute maximum rating: Input/output terminal voltage (5 V) -0.2 to 5.2 V

Absolute maximum rating: Input/output terminal voltage (3.3 V) -0.2 to 3.5 V

Absolute maximum rating: Power current 700 mA

Ambient storage temperature -10 to 60°C (no condensation or icing)

Ambient storage humidity 30 to 85% (no condensation or icing)

Recommended operating range: Power voltage (5 V) 4.75 to 5.25 V

Recommended operating range: Power voltage (3.3 V) 3.14 to 3.47 V

2JCIE-EV

Equipped Sensor

*For details, see the terminal layouts on pages 4 to 6.

Note: When using the sensor evaluation board, the accuracy indicated on the data sheet of each sensor manufacturer is not guaranteed.

External Expansion Sensor *1

Note: When an external expansion sensor is connected to the sensor evaluation board, the current supply ability of the platform board may be

exceeded. Consider suppling power using an external power supply. Check current supply ability in the data sheet and other literature of

each platform board. When using an external power supply, check the Jumper Function information and use jumper switching.

*1. We have checked the operation of typical models of each sensor.

*2. For details, see the terminal layouts on pages 4 to 6.

Software

Access the sample source code that supports each platform from the following URL.

(https://www.components.omron.com/sensor/evaluation-board/2jcie)

Note: 1. The sample source code is for evaluation. OMRON does not guarantee its operation.

2. We bear no responsibility to correct mistakes or bugs in the sample source code for the purpose of changes or any other reason.

3. We cannot accept any inquiries regarding the sample source code.

Part number *Sensor Model Manufacturer Interface

U1 Temperature/humidity sensor SHT30-DIS-B Sensirion I2C

U2 Ambient light sensor OPT3001DNP Texas Instruments I2C

U3 MEMS digital barometric pressure sensor 2SMPB-02E OMRON I2C

U5 MEMS digital motion sensor LIS2DW12 STMicroelectronics SPI

U6 MEMS microphone SPH0645LM4H-B Knowles I2S

Product Manufacturer Model Supported connector *2Supported accessories

(sold separately)

RP type AR Type FT type

MEMS Thermal sensor

OMRON

D6T-44L-06/-H

CN5 2JCIE-HARNESS-01

D6T-8L-09/-H

D6T-1A-01

D6T-1A-02

D6T-32L-01A

MEMS flow sensor

D6F-PH0025AD1

CN4 2JCIE-HARNESS-02D6F-PH0505AD3

D6F-PH5050AD3

D6F-10A7D-000-0

CN4 2JCIE-HARNESS-03

D6F-20A7D-000-0

D6F-50A7D-000-0

D6F-70AB7D-000-0

Light convergent reflective sensor B5W-LB2101-1 --- CN8 TH2 2JCIE-HARNESS-04

Air quality sensor B5W-LD00101-1/-2 CN7 TH2 2JCIE-HARNESS-05

2JCIE-EV

Dimensions (Unit: mm)

Connection

(30)

Four, 2.8 dia.

(65)

(5.9)

1.6

2JCIE-EV01-RP1

CN4

CN5

CN6 TH1

CN9

TH4

Front Back

U3 U5 U6

Terminal Arrangement

2JCIE-EV01-RP1

CN9

1 3.3 VDC *12 5 VDC *2

3SDA *14NC

5SCL *16NC

7NC 8RXD *2

9NC 10 TXD *2

11 DIGITAL4 *112 BCLK *1

13 RDY *214 NC

15 NC 16 DIGITAL1 *1

17 NC 18 DIGITAL2 *1

19 MOSI *120 GND

21 MISO *122 DIGITAL3 *1

23 SCLK *124 CS *1

25 NC 26 NC

27 NC 28 NC

29 EN *230 NC

31 LED_SW_R *232 LED_SW_G *2

33 LED_SW_B *234 NC

35 WS *136 INT *1

37 INT_LIS2DW12 *138 MIC_OUT *1

39 GND 40 NC

CN4

BM04B-SRSS-TB (JST)

1SCL

2SDA

3 3.3 VDC

4GND

CN5

BM04B-GHS-TB (JST)

1GND

25 VDC

3 SDA_5V

4 SCL_5V

CN6

BM06B-SRSS-TB (JST)

15 VDC

2RXD

3TXD

4GND

5 3.3 VDC

6NC

TH1

15 VDC

2GND

3 SCL_5V

4SDA_5V

5RDY

6NC

7GND

TH4

19 5 VDC (Ext.)

07 GND

*1. 3.3 V terminal *2. 5.0 V terminal

Temperature/humidity sensor

Light sensor

Barometric pressure sensor

Acceleration sensor

Microphone

RGB LED

SPI

UART

DIGITAL OUT

or PWM

CN5: Connector

CN4: Connector

CN6: Connector

TH1: Through-hole

CN9

I2S

DIGITAL IN Level conversion 5V

2JCIE-EV01-RP1

I2C

I2C level conversion

Block Diagram

2JCIE-EV01-RP1

2JCIE-EV

Dimensions (Unit: mm)

Connection

(6.6)

1.6

(25) 20.5

(61.5)

Four, 2.3 dia.

2JCIE-EV01-AR1

TH3

CN10

CN11 TH1 TH5

CN5

CN8 CN7

CN6 CN4

U3 U5 U6

Front Back

Terminal Arrangement

2JCIE-EV01-AR1

CN4

BM04B-SRSS-TB (JST)

1SCL

2SDA

3 3.3 VDC

4GND

CN5

BM04B-GHS-TB (JST)

1GND

25 VDC

3 SDA_5V

4 SCL_5V

CN6

BM06B-SRSS-TB (JST)

15 VDC

2 RXD-B5W_OUT

3 TXD-B5W_OUT

4GND

5 3.3 VDC

6NC

CN10

1NC

2DAC *2

3PMS_IN *2

4 B5WLA01_OUT *2

5EN *2

6 B5WLA01_IN *2

7PMS_OUT *2

8MIC_OUT *1

9CS *1

10 INT *1

11 BCLK *1

12 WS *1

13 LED_SW_R *2

14 LED_SW_G *2

CN11

15 VDC *2

2 VBAT *1

3 3.3 VDC *1

4GND

5NC

6 RXD-B5W_OUT *2

7 TXD-B5W_OUT *2

8SCL *1

9SDA *1

10 MISO *1

11 SCLK *1

12 MOSI *1

13 NC

14 LED_SW_B *2

CN7

BM05B-SRSS-TB (JST)

15 VDC

2 TXD-B5W_OUT

3GND

4DAC

5 RXD-B5W_OUT

TH1

15 VDC

2GND

3 SCL_5V

4 SDA_5V

5 RXD-B5W_OUT

6NC

7GND

CN8

B4B-ZR-SM4-TF (JST)

1 B5WLA01_IN

2GND

3 B5WLA01_OUT

45 VDC

TH3

15 VDC

2PMS_IN

3PMS_OUT

4GND

TH5

19 5 VDC (Ext.)

07 GND

B VBAT

*1. 3.3 V terminal *2. 5.0 V terminal

2JCIE-EV01-AR1

I2C

Temperature/humidity sensor

Light sensor

Barometric pressure sensor

Acceleration sensor

Microphone

RGB LED

Level conversion

SPI

UART

DIGITAL IN

ANALOG IN

DIGITAL I/O

DAC

DIGITAL OUT

or PWM

DIGITAL OUT

CN5: Connector

CN4: Connector

CN6: Connector

CN7: Connector

TH1: Through-hole

TH3: Through-hole

CN8: Connector

CN10

CN11

I2S

Level conversion 5V

DIGITAL I/O

I2C level conversion

Block Diagram

2JCIE-EV01-AR1

2JCIE-EV

Dimensions (Unit: mm)

Connection

Four, 2.5 dia.

17.78

(22.86)

(23.86)

45.7

(50.8)

(5.9)

1.6

2JCIE-EV01-FT1

Front Back

123456 1234

1234

12 G

TH5 TH1

CN11

CN10 TH2

CN5

CN6 CN4

U3 U5 U6

Terminal Arrangement

2JCIE-EV01-FT1

CN4

BM04B-SRSS-TB (JST)

1SCL

2SDA

3 3.3 VDC

4GND

CN5

BM04B-GHS-TB (JST)

1GND

25 VDC

3 SDA_5V

4 SCL_5V

CN6

BM06B-SRSS-TB (JST)

15 VDC

2 RXD-B5W_OUT

3 TXD-B5W_OUT

4GND

5 3.3 VDC

6NC

CN10

1 VBAT *1

2NC

3 5 VDC *2

4 B5WLA01_IN *2

5 LED_SW_R *2

6 LED_SW_G *2

7PMS_B5WLA01_

OUT *2

8WS *1

9MIC_OUT1 *1

10 BCLK *1

11 SCL *1

12 SDA *1

TH2

15 VDC

2DAC

3 RXD-B5W_OUT

4 TXD-B5W_OUT

5 B5WLA01_IN

6 PMS_B5WLA01_OUT

7PMS_IN

8 PMS_B5WLA01_OUT

9GND

TH1

15 VDC

2GND

3 SCL_5V

4SDA_5V

5 TXD-B5W_OUT

6NC

7GND

CN11

1NC

2 3.3 VDC *1

3NC

4GND

5DAC *2

6 LED_SW_B *2

7INT *1

8NC

9PMS_IN *2

10 CS *1

11 SCLK *1

12 MOSI *1

13 MISO *1

14 TXD-B5W_OUT *2

15 RXD-B5W_OUT *2

16 EN *2

TH5

19 GND

07 5 VDC (Ext.)

BVBAT

*1. 3.3 V terminal *2. 5.0 V terminal

2JCIE-EV01-FT1

I2C

RGB LED

SPI

UART

DIGITAL IN

DAC

DIGITAL OUT

CN10

CN11

I2S

ANALOG IN

DIGITAL I/O

DIGITAL OUT

Temperature/humidity sensor

Light sensor

Barometric pressure sensor

Acceleration sensor

Microphone

Level conversion

I2C level conversion

CN5: Connector

CN4: Connector

CN6: Connector

TH1: Through-hole

TH2: Through-hole

Block Diagram

2JCIE-EV01-FT1

2JCIE-EV

Dimensions (Unit: mm)

440±10

500±10

Cable harness (option)

2JCIE-HARNESS-01

440±10

500±10

2JCIE-HARNESS-02

440±10

500±10

2JCIE-HARNESS-03

440±10

500±10

2JCIE-HARNESS-04

440±10

500±10

2JCIE-HARNESS-05

2JCIE-EV

Jumper Function (Power Related)

• When using an external power supply, remove the zero-ohm resistance from JP1 and connect the zero-ohm resistance to JP2 ((1) below).

Connect the power of the external power supply to the V terminal in (2) below, and connect GND to G.

• (2JCIE-EV01-AR1/FT1 only) When using an external battery, connect the battery to B and GND to G. When using a battery, a 5 V input sensor

cannot be used.

• When you switch to JP2, JP1 is disabled and power cannot be supplied from the platform board.

• Do not connect JP1 and JP2 at the same time.

How to switch by jumper

• Remove the zero-ohm resistance from JP1 by soldering arm and mount the JP2 by soldering. (Do not connect by soldering while connected to

a base board or to an external power source)

Jumper Function (Output Terminal)

When connected, the above function is enabled. When open, the above function is disabled.

JP5 and JP6 are paired and cannot both be enabled.

How to switch by jumper

Cut the JP6 connection location (central part) with cutters, and connect the divided parts of JP5 by soldering.

Note: Give full consideration to safety when cutting the jumper. OMRON cannot bear responsibility for any injury or damage that occurs.

Accessories

Note: To connect this board to the corresponding platform, it must be directly soldered or the pin header or socket must be soldered.

No. Positions Meaning Application Default Status

JP1

Front Zero-ohm resistance

When supplying power from the platform board Connected Enabled

JP2 When power is supplied from an external power supply or battery

(Only the 2JCIE-EV01-AR1/FT1 supports batteries) Open Disabled

No. Positions Meaning Application Default Status

JP5 Back

(2JCIE-EV01-AR1/FT1 only) Switch by board pattern For TH1 expansion Open Disabled

JP6 B5W digital output function Connected Enabled

Type Model

Pin socket for 2JCIE-EV01-RP1 ESQ-120-12-L-D (SAMTEC)

Pin header for 2JCIE-EV01-AR1 TSW-114-07-L-S (SAMTEC)

Pin socket for 2JCIE-EV01-FT1 ESQ-112-12-L-S (SAMTEC)

ESQ-116-12-L-S (SAMTEC)

(1) (2)

2JCIE-EV01-FT1 Layout

2JCIE-EV

Safety Precautions

Precautions for safe use

Read the following to ensure safe use.

The safety precautions that are provided are extremely important to

safety. Always read and heed the information provided in all safety

precautions.

Explanation of safety symbols

• Do not incorporate this product in a product, regardless of the

application.

• This product is not a measuring instrument. Do not use for

purposes such as sensor output value measurement and

diagnosis.

• When disposing of the product, follow local rules and regulations.

• Keep out of the hands of small children when using and storing the

product. If a small part is swallowed, immediately consult a

physician.

• If you notice a strange odor or smoke coming from the product, or

other abnormal condition, immediately shut off the power and

consult your dealer.

• Do not handle this product with your bare hands. Risk of minor

injury from the packaging box and edge of the board.

• Do not connect the indicated terminals or power not listed in this

manual. Check the rating of each terminal, and do not use a current

or voltage that exceeds the rating.

• This product is not waterproof. Do not use in an environment where

water, oil, or chemicals may splash on the product. Do not wash

with water or by ultrasound, and do not touch with wet hands.

• Do use an air blower. This may damage the sensor.

• Do not disassemble or modify the product.

• Do not grasp the product with excessive force, swing it around, or

treat it roughly. Risk of product failure and injury.

• Do not use in an environment where corrosive, flammable, or

explosive gases are present.

• Treat the measured values acquired by this product as reference

values.

• Do not connect this product to other than one of the models listed

in each table of platform supporting models.

• The pin headers and sockets below are recommended for this

product. For insertion/removal counts, refer to the latest data sheet /

reliability test results for each pin header or socket.

2JCIE-EV01-RP1: ESQ-120-12-L-D

2JCIE-EV01-AR1: TSW-114-07-L-S

2JCIE-EV01-FT1: ESQ-112-12-L-S

ESQ-116-12-L-S

• When this product is connected to any of the platforms, heat and

other effects from the platform will cause the output of the product

to change. Check these effects sufficiently before using the

product

• Check, understand, and consider the installation location of each

sensor before using the product. Do not use with the area around

each sensor in a sealed state.

• This is a precision product. Exercise caution when handling.

Dropping the packing box or the unit, or subjecting the unit and its

terminals to intense shock may result in product failure.

• Do not use or store the product in a high-temperature or high-

humidity location, a location exposed to long hours of direct

sunlight, or in a vehicle. Sudden changes of ambient temperature

may cause internal condensation that results in malfunctioning.

• Do not use or store in a location with dust, salt, or iron powder. Dust

or other contaminants may collect in or on the product and cause

failure.

• Do not use in a location with intense static electricity or

electromagnetic waves. Risk of product failure.

CAUTION Indicates a potentially hazardous situation

which, if not avoided, may result in minor or

moderate injury, or property damage.

Precautions for

Safe Use

Precautions on what to do and what not to

do to ensure safe usage of the product.

Precautions for

Correct Use

Precautions on what to do and what not to

do to ensure proper operation and

performance.

CAUTION

Precautions for Correct Use

MEMO

Terms and Conditions Agreement

Read and understand this catalog.

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have

any questions or comments.

Warranties.

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship

for a period of a week from the date of sale by Omron (or such other period expressed in writing by

Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE

PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL

SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products

or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,

to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the

non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price

of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other

claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,

installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or

unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system

assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in

writing, are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the

combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable

third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is

not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,

or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with

respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE

QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.

Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining

suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it

to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice

to change part numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be

assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to

confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

Please check each region's Terms & Conditions by region website.

OMRON Corporation

Electronic and Mechanical Components Company

Regional Contact

Cat. No. A297-E1-02

1019 (0719)

Americas Europe

https://www.components.omron.com/ http://components.omron.eu/

Asia-Pacific China

https://ecb.omron.com.sg/ https://www.ecb.omron.com.cn/

Korea Japan

https://www.omron-ecb.co.kr/ https://www.omron.co.jp/ecb/

In the interest of product improvement, specifications are subject to change without notice.