High Performance, Low Power HDMI/DVI Transmitter AD9387NK General Low power HDMI/DVI transmitter ideal for portable applications Compatible with HDMI v.1.3, DVI v.1.0, and HDCP 1.3 Single 1.8 V power supply Video/audio inputs accept logic levels from 1.8 V to 3.3 V Digital video 80 MHz operation supports all HDTV resolutions from 480i to 1080i Programmable 2-way color space converter Supports RGB, YCbCr, and DDR Supports ITU656-based embedded syncs Automatic input video format timing detection (CEA-861D) Digital audio Supports standard S/PDIF for stereo LPCM or compressed audio up to 192 kHz 8-channel, uncompressed LPCM I2S audio up to 192 kHz Special features for easy system design On-chip MPU with I2C master to perform HDCP operations and EDID reading operations 5 V tolerant I2C and HPD I/Os, no extra device needed No audio master clock needed for supporting S/PDIF and I2S On-chip MPU reports HDMI events through interrupts and registers APPLICATIONS Digital video cameras Digital still cameras Personal media players Cellular handsets DVD players and recorders Digital set-top boxes A/V receivers HDMI repeater/splitter GENERAL DESCRIPTION FUNCTIONAL BLOCK DIAGRAM SCL SDA MCL MDA INT I2 C SLAVE HDCP CORE HDCP AND EDID MICROCONTROLLER I2C MASTER REGISTER CONFIGURATION LOGIC CLK VSYNC HSYNC DE VIDEO DATA CAPTURE I2S[3:0] LRCLK SCLK DDCSDA Tx0[1:0] S/PDIF MCLK DDCSCL SYNC ADJUSTMENT AND GENERATION COLOR SPACE CONVERSION D[23:0] HPD Tx1[1:0] HDMI Tx CORE AUDIO DATA CAPTURE Tx2[1:0] TxC[1:0] AD9387NK 06880-001 FEATURES Figure 1. The AD9387NK supports both S/PDIF and 8-channel I2S audio. Its high fidelity, 8-channel I2S can transmit either stereo or 7.1 surround audio at 192 kHz. The S/PDIF can carry stereo linear pulse-code modulation (LPCM) audio or compressed audio, including Dolby(R) Digital and DTS(R). The AD9387NK helps reduce system design complexity and cost by incorporating such features as an internal microprocessor for high-bandwidth digital content protection (HDCP) operations, an I2C(R) master for extended display identification data (EDID) reading, a single 1.8 V power supply, and 5 V tolerance on the I2C and hot plug detect pins. For additional information and resources, see the Applications Information section. Fabricated in an advanced CMOS process, the AD9387NK is available in a space saving, 76-ball CSP_BGA. The package is RoHS compliant and is specified from -25C to +90C operation. The AD9387NK is an 80 MHz, high definition multimedia interface (HDMITM) v.1.3 transmitter. It supports HDTV formats up to 720p and 1080i and computer graphic resolutions up to XGA (1024 x 768 @ 75 Hz). With the inclusion of HDCP, the AD9387NK allows the secure transmission of protected content, as specified by the HDCP 1.3 protocol. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2007 Analog Devices, Inc. All rights reserved. AD9387NK TABLE OF CONTENTS Features .............................................................................................. 1 Explanation of Test Levels ............................................................4 Applications ....................................................................................... 1 ESD Caution...................................................................................4 General Description ......................................................................... 1 Applications Information .................................................................5 Functional Block Diagram .............................................................. 1 Design Resources ..........................................................................5 Revision History ............................................................................... 2 Document Conventions ...............................................................5 Specifications..................................................................................... 3 Outline Dimensions ..........................................................................6 Absolute Maximum Ratings............................................................ 4 Ordering Guide .............................................................................6 REVISION HISTORY 10/07--Revision 0: Initial Version Rev. 0 | Page 2 of 8 AD9387NK SPECIFICATIONS Table 1. AD9387NKBBCZ-80/AD9387NKBBCZRL-80 Parameter DIGITAL INPUTS Input Voltage, High (VIH) Input Voltage, Low (VIL) Input Capacitance THERMAL CHARACTERISTICS Thermal Resistance Junction-to-Case BGA (JC) Junction-to-Ambient (JA) Ambient Temperature DC SPECIFICATIONS Input Leakage Current (IIL) AC SPECIFICATIONS CLK Frequency TMDS Output CLK Duty Cycle Input Data Setup Time Input Data Hold Time TMDS Differential Swing VSYNC and HSYNC Delay from DE Falling Edge VSYNC and HSYNC Delay to DE Rising Edge Differential Output Swing Low-to-High Transition Time High-to-Low Transition Time AUDIO AC TIMING Sample Rate I2S Cycle Time I2S Setup Time I2S Hold Time 1 2 Conditions I2S and S/PDIF See the Explanation of Test Levels section. UI = unit interval. Rev. 0 | Page 3 of 8 Temp Test Level 1 Min Full Full 25C VI VI VIII 1.4 -0.3 Full V V V -25 Full VI Full Full Full Full Max Unit 3.5 +0.7 3 V V pF +90 C/W C/W C -10 +10 A IV IV IV IV VI IV IV 13.5 48 1 0.7 900 80 52 MHz % ns ns mV UI 2 UI2 25C 25C VII VII 75 75 Full 25C 25C 25C IV IV IV IV 32 2 2 Typ 15.2 59 +25 1000 1 1 1100 175 175 ps ps 192 1 kHz UI2 ns ns AD9387NK ABSOLUTE MAXIMUM RATINGS EXPLANATION OF TEST LEVELS Table 2. Parameter Digital Inputs Digital Output Current Operating Temperature Range Storage Temperature Range Maximum Junction Temperature Maximum Case Temperature Rating -0.3 V to +5 V 20 mA -40C to +100C -65C to +150C 150C 150C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. I. 100% production tested. II. 100% production tested at 25C and sample tested at specified temperatures. III. Sample tested only. IV. Parameter is guaranteed by design and characterization testing. V. Parameter is a typical value only. VI. 100% production tested at 25C; guaranteed by design and characterization testing. VII. Limits defined by HDMI specification; guaranteed by design and characterization testing. VIII. Guaranteed by design. ESD CAUTION Rev. 0 | Page 4 of 8 AD9387NK APPLICATIONS INFORMATION DESIGN RESOURCES DOCUMENT CONVENTIONS The following resources, as well as evaluation kits, reference design schematics, and other support documentation, are available after signing an NDA available from flatpanel_apps@analog.com. Users can access a programming guide, a hardware user guide, a software driver user guide, and software driver source code after signing an NDA. In this data sheet, data is represented using the conventions described in Table 3. Other references include the following: 0bNN Table 3. Document Conventions Data Type 0xNN EIA/CEA-861, a technical specifications document, describes audio and video InfoFrames, as well as the E-EDID structure for HDMI. It is available from the Consumer Electronics Association (CEA). NN Bit HDMI v.1.3, a defining document for HDMI v.1.3, and the HDMI Compliance Test Specification v.1.3 are available from HDMI Licensing, LLC. HDCP Specification v.1.3, the defining technical specifications document for the HDCP v.1.3, is available from Digital Content Protection, LLC. Rev. 0 | Page 5 of 8 Format Hexadecimal (Base 16) numbers are represented using the C language notation, preceded by 0x. Binary (Base 2) numbers are represented using the C language notation, preceded by 0b. Decimal (Base 10) numbers are represented using no additional prefixes or suffixes. Bits are numbered in little endian format; that is, the least significant bit of a byte or word is referred to as Bit 0. AD9387NK OUTLINE DIMENSIONS A1 CORNER INDEX AREA 6.10 6.00 SQ 5.90 10 9 8 7 6 5 4 3 2 1 A B BALL A1 PAD CORNER TOP VIEW C 4.50 BSC SQ D E 0.50 BSC F G H J K DETAIL A BOTTOM VIEW 0.75 REF *1.40 MAX DETAIL A 0.65 MIN 0.15 MIN COPLANARITY 0.08 MAX *COMPLIANT TO JEDEC STANDARDS MO-225 WITH THE EXCEPTION TO PACKAGE HEIGHT. 010807-A 0.35 SEATING 0.30 PLANE 0.25 BALL DIAMETER Figure 2. 76-Ball Chip Scale Package Ball Grid Array [CSP_BGA] 6 mm x 6 mm x 1.4 mm (BC-76-1) Dimensions shown in millimeters ORDERING GUIDE Model AD9387NKBBCZ-80 1 AD9387NKBBCZRL-801 AD9387NK/PCBZ1 1 Temperature Range -25C to +90C -25C to +90C Package Description 76-Ball Chip Scale Package Ball Grid Array [CSP_BGA] 76-Ball Chip Scale Package Ball Grid Array [CSP_BGA] Evaluation Board Z = RoHS Compliant Part. Rev. 0 | Page 6 of 8 Package Option BC-76-1 BC-76-1 AD9387NK NOTES Rev. 0 | Page 7 of 8 AD9387NK NOTES Purchase of licensed I2C components of Analog Devices or one of its sublicensed Associated Companies conveys a license for the purchaser under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips. (c)2007 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D06880-0-10/07(0) Rev. 0 | Page 8 of 8