To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET PHOTOCOUPLER PS2805A-1,PS2805A-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS2805A-1 and PS2805A-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light. FEATURES * High isolation voltage (BV = 2 500 Vr.m.s.) PIN CONNECTION (Top View) * Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm) PS2805A-1 * AC input response * Ordering number of tape product: PS2805A-1-F3, F4, PS2805A-4-F3, F4 4 3 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector * Pb-Free product * Safety standards * UL approved: File No. E72422 1 2 * DIN EN60747-5-2 (VDE0884 Part2) approved (Option) PS2805A-4 16 15 14 13 12 11 10 9 APPLICATIONS * Programmable logic controllers * OA equipment * Measuring instruments 1 2 3 4 5 6 7 8 * Hybrid IC 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode, Cathode Cathode, Anode Emitter Collector The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PN10399EJ03V0DS (3rd edition) Date Published March 2006 CP(K) Printed in Japan The mark shows major revised points. NEC Compound Semiconductor Devices, Ltd. 2003, 2006 PS2805A-1,PS2805A-4 PACKAGE DIMENSIONS (UNIT: mm) PS2805A-1 PS2805A-4 2.70.3 10.30.3 4 3 16 9 1 2 1 8 4.4 0.50.3 1.27 0.40.1 0.12 M 0.10.1 2.0+0.3 -0.2 0.15+0.10 -0.05 7.00.3 4.4 0.15+0.10 -0.05 0.10.1 2.00.1 7.00.3 0.40+0.10 -0.05 0.12 M 0.50.3 1.27 MARKING EXAMPLE PS2805A-4 PS2805A-1 5A Country Assembled 301 PS2805A-4 NL301 Assembly Lot *1 Last number of type No. : 5A N L 3 01 3 01 Week Assembled Year Assembled (Last 1 Digit) Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) *1 2 Assembly Lot No. 1 pin Mark : Pb-Free Rank Code Data Sheet PN10399EJ03V0DS PS2805A-1,PS2805A-4 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Pb-Free Packing Style Safety Standards Approval PS2805A-1 PS2805A-1-A 50 pcs (Tape 50 pcs cut) Standard products PS2805A-1-F3 PS2805A-1-F3-A Embossed Tape 3 500 pcs/reel (UL approved) PS2805A-1-F4 PS2805A-1-F4-A PS2805A-4 PS2805A-4-A Magazine Case 45 pcs PS2805A-4-F3 PS2805A-4-F3-A Embossed Tape 2 500 pcs/reel PS2805A-4-F4 PS2805A-4-F4-A PS2805A-1-V PS2805A-1-V-A 50 pcs (Tape 50 pcs cut) DIN EN60747-5-2 PS2805A-1-V-F3 PS2805A-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2805A-1-V-F4 PS2805A-1-V-F4-A PS2805A-4-V PS2805A-4-V-A Magazine Case 45 pcs PS2805A-4-V-F3 PS2805A-4-V-F3-A Embossed Tape 2 500 pcs/reel PS2805A-4-V-F4 PS2805A-4-V-F4-A Application *1 Part Number PS2805A-1 PS2805A-4 PS2805A-1 Approved (Option) PS2805A-4 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10399EJ03V0DS 3 PS2805A-1,PS2805A-4 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings PS2805A-1 Diode Forward Current (DC) Power Dissipation PS2805A-4 30 IF Power Dissipation Derating Unit mA/ch PD/C 0.6 0.8 mW/C PD 60 80 mW/ch IFP 0.5 A/ch Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V IC 30 mA/ch PC/C 1.2 mW/C PC 120 mW/ch BV 2 500 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output Pins 1-2 shorted together, 3-4 shorted together (PS2805A-1). Pins 1-8 shorted together, 9-16 shorted together (PS2805A-4). 4 Data Sheet PN10399EJ03V0DS PS2805A-1,PS2805A-4 ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) Parameter Diode Symbol Conditions MIN. TYP. MAX. Unit 1.4 V Forward Voltage VF IF = 5 mA 1.2 Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 20 Transistor Collector to Emitter Dark Current ICEO VCE = 70 V, IF = 0 mA Coupled Current Transfer Ratio (IC/IF) CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE(sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *1 Tr Rise Time Fall Time *1 VCC = 5 V, IC = 2 mA, RL = 100 tf 50 0.13 10 pF 100 nA 400 % 0.3 V 11 0.4 pF 5 s 7 *1 Test circuit for switching time VCC Pulse Input PW = 100 s Duty Cycle = 1/10 IF VOUT 50 RL = 100 Data Sheet PN10399EJ03V0DS 5 PS2805A-1,PS2805A-4 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 80 Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 PS2805A-4 0.8 mW/C 60 PS2805A-1 40 0.6 mW/C 20 0 25 50 75 100 PS2805A-1 PS2805A-4 120 1.2 mW/C 80 40 25 50 75 100 Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 30 TA = +100C +60C +25C 10 5 0C -25C -55C 1 0.5 IF = 10 mA 25 20 15 5 mA 10 2 mA 1 mA 5 0.1 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 1.5 4 6 10 8 Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 10 000 IF = 10 mA 5 mA 1 000 VCE = 24 V VCE = 70 V 100 10 1 0 25 50 75 100 2 mA 1 mA 1 0.1 0 Ambient Temperature TA (C) 0.2 0.4 0.6 0.8 Collector Saturation Voltage VCE (sat) (V) Remark The graphs indicate nominal characteristics. 6 2 Forward Voltage VF (V) Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 0.05 0.7 125 Ambient Temperature TA (C) Collector Current IC (mA) Forward Current IF (mA) 160 0 125 100 50 200 Data Sheet PN10399EJ03V0DS 1.0 PS2805A-1,PS2805A-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 400 1.4 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.2 1.0 0.8 0.6 Normalized to 1.0 0.4 at TA = 25C, IF = 5 mA, VCE = 5 V 0.2 CTR:90% CTR:390% 0 -75 -25 -50 0 25 50 75 VCE = 5 V, n=3 300 200 100 0 0.01 100 0.1 1 10 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 100 IF = 5 mA, VCC = 5 V, CTR = 236 % IC = 2 mA, VCC = 5 V, CTR = 236 % tf tr Switching Time t ( s) Switching Time t ( s) Sample A B C 10 td ts 1 tf 100 ts 10 tr 0.1 10 100 1 000 td 1 1 10 000 10 100 Load Resistance RL (k) Load Resistance RL () LONG TERM CTR DEGRADATION FREQUENCY RESPONSE 5 1.2 0 1.0 -5 100 -10 300 -15 -20 RL = 1 k CTR (Relative Value) Normalized Gain GV IF = 5 mA (TYP.) 0.8 TA = 25C 0.6 TA = 60C 0.4 0.2 IF = 5 mA, VCE = 5 V -25 0.1 1 10 100 1 000 0 10 Frequency f (kHz) 102 103 104 105 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet PN10399EJ03V0DS 7 PS2805A-1,PS2805A-4 TAPING SPECIFICATIONS (UNIT: mm) 1.5+0.1 -0 7.50.1 4.00.1 16.00.3 2.00.1 7.550.1 1.750.1 Outline and Dimensions (Tape) 2.8 MAX. 0.3 1.550.1 2.30.1 2.850.1 4.00.1 Tape Direction 5A 301 5A 301 5A 301 5A 301 5A 301 5A 301 5A 301 5A 301 5A 301 PS2805A-1-F4 5A 301 PS2805A-1-F3 Outline and Dimensions (Reel) R 1.0 21.00.8 1001.0 2.00.5 13.00.2 3302.0 2.00.5 17.51.0 21.51.0 Packing: 3 500 pcs/reel 8 Data Sheet PN10399EJ03V0DS 15.9 to 19.4 Outer edge of flange PS2805A-1,PS2805A-4 2.8 MAX. 16.00.3 7.50.1 1.5+0.1 -0 10.70.1 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 0.3 2.30.1 8.30.1 1.550.1 12.00.1 Tape Direction PS2805A-4-F3 PS2805A-4-F4 Outline and Dimensions (Reel) R 1.0 21.00.8 1001.0 2.00.5 13.00.2 3302.0 2.00.5 17.51.0 21.51.0 Packing: 2 500 pcs/reel Data Sheet PN10399EJ03V0DS 15.9 to 19.4 Outer edge of flange 9 PS2805A-1,PS2805A-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100C 10 Data Sheet PN10399EJ03V0DS PS2805A-1,PS2805A-4 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10399EJ03V0DS 11 PS2805A-1,PS2805A-4 When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. * The information in this document is current as of March, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 12 Data Sheet PN10399EJ03V0DS PS2805A-1,PS2805A-4 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1573 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0504