SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL05C5R6CB5NCNC Product : Multi-layer Ceramic Capacitor Description : CAP, 5.6, 50V, 0.25, C0G, 0402 A. Samsung Part Number Series 0402 Dielectric C0G Capacitance 05 C 5R6 C B 5 N C N C Samsung Multi-layer Ceramic Capacitor Size Capacitance CL (inch code) L: 1.0 0.05 5.6 0.25 tolerance Rated Voltage 50 V Thickness 0.5 0.05 mm mm 0.5 0.05 mm W: Inner electrode Ni Termination Cu Plating Sn 100% (Pb Free) Product High-Q Special Reserved for future use Packaging Cardboard Type, 7" reel B. Samsung Reliability Test and Judgement condition Performance Within specified tolerance Test condition 110% 0.5~5Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 500Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (10) 300% of the rated voltage Voltage mechanical breakdown Temperature C0G Characteristics Adhesive Strength (From -55 to 125, Capacitance change should be within 30PPM/) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Bending to the limit (1mm) with 1.0mm/sec. Solderability within 5% or 0.5 whichever is larger More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. Capacitance 512 min Q Insulation (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat within 2.5% or 0.25 whichever is larger Tan , IR : initial spec. Solder pot : 2705, 101sec. Performance Test condition Vibration Test Capacitance change : Moisture within 2.5% or 0.25 whichever is larger From 10 to 55 (return : 1min.) Tan , IR : initial spec. 2hours 3 direction (x, y, z) Capacitance change : With rated voltage Resistance within 7.5% or 0.75 whichever is larger 402, 90~95%RH, 500+12/-0hrs Q: 118.67 min IR : High Temperature Resistance Amplitude : 1.5mm 500Mohm or 25Mohm Whichever is Smaller Capacitance change : With 200% within 3% or 0.3 whichever is larger Q: 256 min Max. operating temperature IR : of the rated voltage 1000+48/-0hrs 1000Mohm or 50Mohm Whichever is Smaller Temperature Capacitance change : 1 cycle condition Cycling within 2.5% or 0.25 whichever is larger Min. operating temperature Tan , IR : initial spec. Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue. 25 25