S8035KTP - Littelfuse, Inc.

279

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

35 Amp Standard SCRs

Sxx35x Series

Description

Excellent unidirectional switches for phase control

applications such as heating and motor speed controls.

Standard phase control SCRs are triggered with few

milliamperes of current at less than 1.5V potential.

Features & Beneﬁts

• RoHS compliant

• Glass – passivated

junctions

• Voltage capability up

to 1000 V

• Surge capability up to

500 A

Schematic Symbol

Main Features

Symbol Value Unit

IT(RMS) 35 A

VDRM /VRRM 400 to 1000 V

IGT 40 mA

Absolute Maximum Ratings

Symbol Parameter Test Conditions Value Unit

IT(RMS) RMS on-state current TC = 95°C 35 A

IT(AV) Average on-state current TC = 95°C 22.0 A

ITSM Peak non-repetitive surge current

single half cycle; f = 50Hz;

TJ (initial) = 25°C 425

single half cycle; f = 60Hz;

TJ (initial) = 25°C 500

I2t I2t Value for fusing tp = 8.3 ms 1035 A2s

di/dt Critical rate of rise of on-state current f = 60Hz ; TJ = 125°C 150 A/μs

IGM Peak gate current TJ = 125°C 3.5 A

PG(AV) Average gate power dissipation TJ = 125°C 0.8 W

Tstg Storage temperature range -40 to 150 °C

TJOperating junction temperature range -40 to 125 °C

Applications

Typical applications are AC solid-state switches, industrial

power tools, exercise equipment, white goods and

commercial appliances.

Internally constructed isolated packages are offered for

ease of heat sinking with highest isolation voltage.

Agency Approval

Agency Agency File Number

®J & K Packages: E71639

280

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

35 Amp Standard SCRs

Sxx35x Series

Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed)

Symbol Test Conditions Value Unit

IGT VD = 12V; RL = 30Ω

MAX. 40

MIN. 5

VGT MAX. 1. 5 V

dv/dt

VD = VDRM; gate open; TJ = 100°C

400V

MIN.

450

V/μs

600V

425

800V

400

1000V

200

VD = VDRM; gate open; TJ = 125°C

400V

350

600V

325

800V

300

VGD VD = VDRM; RL = 3.3 kΩ; TJ = 125°C MIN. 0.2 V

IHIT = 400mA (initial) MAX. 50 mA

tq(1) MAX. 35 μs

tgt IG = 2 x IGT; PW = 15µs; IT = 70A TYP. 2 μs

Notes :

(1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs

Static Characteristics

Symbol Test Conditions Value Unit

VTM IT = 70A; tp = 380μs MAX. 1. 8 V

IDRM / IRRM VDRM / VRRM

TJ = 25°C

400 – 600V

MAX.

μA

800 – 1000V 20

TJ = 100°C

400 – 600V 1000

800V 1500

1000V 3000

TJ = 125°C

400 – 600V 2000

800V 3000

Thermal Resistance

Symbol Parameter Value Unit

Rθ(J-C) Junction to case (AC) 0.7 °C/W

281

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

35 Amp Standard SCRs

Sxx35x Series

Figure 1: Normalized DC Gate Trigger Current

vs. Junction Temperature

Figure 2: Normalized DC Gate Trigger Voltage

vs. Junction Temperature

125

0.0

0.5

1.0

1.5

2.0

-40-15 10 35 60 85 110

Junction Temperature (TJ) -- (°C)

Ratio of I

/ I

= 25°C)

Figure 3: Normalized DC Holding Current

vs. Junction Temperature

Figure 4: On-State Current vs. On-State

Voltage (Typical)

125

0.0

0.5

1.0

1.5

2.0

-40-15 10 35 60 85 110

Junction Temperature (TJ) -- (°C)

Ratio of VGT / VGT (TJ = 25°C)

125

0.0

0.5

1.0

1.5

2.0

-40-15 10 35 60 85 110

Junction Temperature (T

) -- (°C)

Ratio of IH / IH (TJ = 25°C)

= 25°C

100

120

0.70.8 0.91.0 1.11.2 1.31.4 1.51.6

Instantaneous On-state Voltage (v

) – Volts

Instantaneous On-state Current (i

) – Amps

Figure 5: Power Dissipation (Typical)

vs. RMS On-State Current

Figure 6: Maximum Allowable Case Temperature

vs. RMS On-State Current

0510 15 20 25 30 35

RMS On-State Current [IT(RMS)] - (Amps)

Average On-State Power Dissipation

[PD(AV)] - (Watts)

100

105

110

115

120

125

130

0510 15 20 25 30 35 40

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 180°

RMS On-State Current [I

T(RMS)

] - Amps

Maximum Allowable Case

Temperature (T

) - °C

282

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

35 Amp Standard SCRs

Sxx35x Series

100

1000

110100 1000

Surge Current Duration -- Full Cycles

Peak Surge (Non-repetitive)

On-state Current (ITSM) – Amps

Figure 7: Maximum Allowable Case Temperature vs.

Average On-State Current

105

100

110

115

120

125

130

0510 15 20 25

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 180°

Average On-State Current [IT(AVE)] - Amps

Maximum Allowable Case

Temperature (TC) - °C

Figure 8: Peak Capacitor Discharge Current

Figure 9: Peak Capacitor Discharge Current Derating

100

1000

0.5 1.

0.0 50.0

Pulse Current Duration (tw) - ms

Peak Discharge Current (ITM) - Amps

ITRM

0.0

0.2

0.4

0.6

0.8

1.0

1.2

0255075100 125 150

Normalized Peak Current

Case Temperature (T

) - °C

Figure 10: Surge Peak On-State Current vs. Number of Cycles

SUPPLY FREQUENCY: 60 Hz Sinusoidal

LOAD: Resistive

RMS On-State Current: [IT(RMS)]: Maximum Rated

Value at Speciﬁed Case Temperature

Notes:

1. Gate control may be lost during and immediately

following surge current interval.

2. Overload may not be repeated until junction

temperature has returned to steady-state

rated value.

283

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

35 Amp Standard SCRs

Sxx35x Series

Soldering Parameters

Reﬂow Condition Pb – Free assembly

Pre Heat

- Temperature Min (Ts(min))150°C

- Temperature Max (Ts(max))200°C

- Time (min to max) (ts)60 – 180 secs

Average ramp up rate (Liquidus Temp)

(TL) to peak 5°C/second max

TS(max) to TL - Ramp-up Rate 5°C/second max

Reﬂow - Temperature (TL) (Liquidus) 217°C

- Temperature (tL)60 – 150 seconds

Peak Temperature (TP)260+0/-5 °C

Time within 5°C of actual peak

Temperature (tp)20 – 40 seconds

Ramp-down Rate 5°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

Do not exceed 280°C

Physical Speciﬁcations Environmental Speciﬁcations

Test Speciﬁcations and Conditions

AC Blocking MIL-STD-750, M-1040, Cond A Applied

Peak AC voltage @ 125°C for 1008 hours

Temperature Cycling

MIL-STD-750, M-1051,

100 cycles; -40°C to +150°C;

15-min dwell-time

Temperature/

Humidity

EIA / JEDEC, JESD22-A101

1008 hours; 320V - DC: 85°C;

85% rel humidity

High Temp Storage MIL-STD-750, M-1031,

1008 hours; 150°C

Low-Temp Storage 1008 hours; -40°C

Thermal Shock

MIL-STD-750, M-1056

10 cycles; 0°C to 100°C; 5-min dwelltime

at each temperature; 10 sec (max) transfer

time between temperature

Autoclave

EIA / JEDEC, JESD22-A102

168 hours (121°C at 2 ATMs) and

100% R/H

Resistance to

Solder Heat MIL-STD-750 Method 2031

Solderability ANSI/J-STD-002, category 3, Test A

Lead Bend MIL-STD-750, M-2036 Cond E

Terminal Finish 100% Matte Tin-plated

Body Material UL recognized epoxy meeting ammability

classiﬁcation 94V-0

Lead Material Copper Alloy

Design Considerations

Careful selection of the correct device for the application’s

operating parameters and environment will go a long way

toward extending the operating life of the Thyristor. Good

design practice should limit the maximum continuous

current through the main terminals to 75% of the device

rating. Other ways to ensure long life for a power discrete

semiconductor are proper heat sinking and selection of

voltage ratings for worst case conditions. Overheating,

overvoltage (including dv/dt), and surge currents are

the main killers of semiconductors. Correct mounting,

soldering, and forming of the leads also help protect

against component damage.

Time

Temperature

TS(max)

TS(min)

time to peak temperature

Preheat

eat

Ramp-upRamp-up

Ramp-down

284

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

35 Amp Standard SCRs

Sxx35x Series

Dimensions – TO- 218X (J Package) — Isolated Mounting Tab

Dimensions – TO- 218AC (K Package) — Isolated Mounting Tab

Dimension Inches Millimeters

Min Max Min Max

A 0.810 0.835 20.57 21.21

B0.610 0.630 15.49 16.00

C 0.178 0.188 4.52 4.78

D 0.055 0.070 1.40 1.78

E 0.487 0.497 12.37 12.62

F0.635 0.655 16.13 16.64

G0.022 0.029 0.56 0.74

H0.075 0.095 1.91 2.41

J 0.575 0.625 14.61 15.88

K0.256 0.264 6.50 6.71

L 0.220 0.228 5.58 5.79

M 0.080 0.088 2.03 2.24

N0.169 0.177 4.29 4.49

P 0.034 0.042 0.86 1.07

R 0.113 0.121 2.87 3.07

S0.086 0.096 2.18 2.44

T0.156 0.166 3.96 4.22

U0.164 0.165 4.10 4.20

V0.603 0.618 15.31 15.70

W 0.000 0.005 0.00 0.13

X 0.003 0.012 0.07 0.30

Y 0.028 0.032 0.71 0.81

Z 0.085 0.095 2.17 2.42

U (diameter)

CATHODE

Measurement

Point

GATE

Note: Maximum torque to

be applied to mounting tab

is 8 in-lbs. (0.904 Nm).

ANODE

Dimension Inches Millimeters

Min Max Min Max

A 0.810 0.835 20.57 21.21

B0.610 0.630 15.49 16.00

C 0.178 0.188 4.52 4.78

D 0.055 0.070 1.40 1.78

E 0.487 0.497 12.37 12.62

F0.635 0.655 16.13 16.64

G0.022 0.029 0.56 0.74

H0.075 0.095 1.91 2.41

J 0.575 0.625 14.61 15.88

K 0.211 0.219 5.36 5.56

L 0.422 0.437 10.72 11. 10

M 0.058 0.068 1.47 1.73

N 0.045 0.055 1. 14 1.40

P 0.095 0.115 2.41 2.92

Q 0.008 0.016 0.20 0.41

R 0.008 0.016 0.20 0.41

U0.164 0.165 4.10 4.20

W 0.085 0.095 2.17 2.42

Tc Measurement Point

U (diameter)

GATE

ANODE

CATHODE

Note: Maximum torque

to be applied to mounting

tab is 8 in-lbs. (0.904 Nm).

285

Revised: June 24, 2011 04:57 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

35 Amp Standard SCRs

Sxx35x Series

Product Selector

Part Number Voltage Gate Sensitivity Type Package

400V 600V 800V 1000V

Sxx35K X X X X 40mA Standard SCR TO-218AC

Sxx35J X X X 40mA Standard SCR TO-218X

Note: xx = Voltage

Packing Options

Part Number Marking Weight Packing Mode Base Quantity

Sxx35KTP Sxx35K 4.40g Tube 250 (25 per tube)

Sxx35JTP Sxx35J 5.23g Tube 250 (25 per tube)

Note: xx = Voltage

Part Numbering System Part Marking System

TO-218 AC (K Package)

TO-218 X – (J Package)

®YMLXX

S6035K

DEVICE TYPE

S: SCR

xx: Lead Form Option

PACKAGE TYPE

K: TO-218AC (Isolated)

J: TO-218X (Isolated)

CURRENT RATING

Lead Form Dimensions

35: 35A

VOLTAGE RATING

40: 400V

60: 600V

80: 800V

K0: 1000V

SENSITIVITY & TYPE

S6035K

[blank]: 40mA