The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW 0.5 mm Pitch, 1.0 mm above the board Top Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34(S)Series Increased FPC/FFC holding force Space saving (30 pos. shown) Actuator Metal fittings 1.0mm 17m m 3.2mm Easy FPC/FFC insertion Back opening rotating 17 mm All four sides are chamfered. Top contacts FP Features C /F FC 1. Low-profile With the 1.0 mm above the board and width of 3.8 mm the connectors are used in space saving applications. Ready to insert FPC/FFC 2. Increased FPC/FFC retention Delivered with the actuator open As compared with existing similar construction connectors: * In horizontal direction: Approximately 2.6 times * In vertical direction: Approximately 2 times 3. Unique Back-Flip rotating actuator The rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. Easy FPC/ FFC insertion Entry chamfers at all sides of the FPC/FFC insertion slot assure correct insertion and positioning of the FPC/FFC. 5. Delivered with the actuator open FPC/FPC can be immediately inserted without the need for the opening of the actuator. FPC FPC/FFC inserted and retained. Completed electrical and mechanical connection. 6. Standard FPC/FFC thickness Reliable connection with the use of ready available 0.3 mm thick FFC/FPC. 7. Compatible with existing connectors. FPC/FFC and PCB mounting patterns are the same as for the FH19SC Series (bottom contact), allowing the use of both connectors for interconnections between two boards or replacement of the connectors. 8. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. 9. Board placement with automatic equipment Flat top surface and packaging on the tape-and-reel allows use of vacuum nozzles. Standard reel contains 5,000 pieces. Compatible with existing connectors.(FH19SC SERIES) Applications Mobile phones, PDA's, digital cameras, digital camcorders, camera modules and other compact devices requiring Flexible Printed Circuit connections using high reliability extremely small profile connectors. 2008.3 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.0 be mm discontinued Please check products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (S)Series0.5 FH34 mm Pitch, abovesoon. the board Top the Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Specifications Operating temperature range: -55 to +85C (Note 1) Operating humidity range: Relative humidity 90% max. (No condensation) Current rating 0.5 A Ratings Voltage rating 50 Vrms AC Recommended FPC/FFC Storage temperature range: -10 to +50C (Note 2) Storage humidity range: Relative humidity 90% max. (No condensation) Thickness: 0.3 +/- 0.03 mm, Gold plated contact pads Item 1. Insulation resistance 2. Withstanding voltage 3. Contact resistance 4. Durability 5. Vibration 6. Shock 7. Humidity (Steady state) 8. Temperature cycle 9. Resistance to soldering heat Specification Conditions 500 Mo min. No flashover or insulation breakdown 100 mo max. * Including FPC and FFC conductor resistance Contact resistance: 100 mo max. No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Contact resistance: 100 mo max. No damage, cracks, or parts dislocation No electrical discontinuity of 1s or longer Contact resistance: 100 mo max. No damage, cracks, or parts dislocation Contact resistance: 100 mo max. Insulation resistance: 50 Mo min. No damage, cracks, or parts dislocation Contact resistance: 100 mo max. Insulation resistance: 50 Mo min. No damage, cracks, or parts dislocation No deformation of components affecting performance 100 V DC 250 Vrms AC / one minute 1 mA, AC / DC 20mV max (AC: 1kHz) 20 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis Acceleration of 981m/s2, 6 ms duration, sine halfwave, 3 cycles in each of the 3 axis 96 hours at 40C and humidity of 90 to 95% Temperature : -55C / +15C to +35C/+85C / +15C to +35C Time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles Reflow: At the recommended temperature profile Manual soldering: 350C 5C for 5 seconds (Note 3) Note1: Includes temperature rise caused by current flow. Note2: The term "storage" refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. Note3: Small blisters of the molding compounds in small areas will not affect form, fit or function. Note4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Part Insulator Actuator Contacts Metal fittings Material LCP PA Phosphor bronze Phosphor bronze Finish Color: Beige Color: Black Gold plating Pure tin reflow plating Remarks UL94V-0 ------------- Ordering information FH34 S - 30S - 0.5 SH (50) 1 2 1 Series name : FH34 2 S : FPC/FFC 0.3 mm thick 3 Number of positions : 4, 8, 11, 14, 16, 22 26, 30, 32, 34 4 Contact pitch 2 : 0.5mm 3 4 5 6 5 Termination type : SH : SMT horizontal mounting type 6 Plating specifications (50)...Gold plating with nickel barrier 5,000 pieces / reel The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued check products on theBack-Flip Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. (S)Series0.5 FH34 mm Pitch, 1.0soon. mmPlease above thetheboard Topstatus Contact, actuator Flexible Printed Circuit & Flexible Flat your Cable ZIF sales Connectors Connector Dimensions A B H (1.95) 0.5 (3.2) Number of contacts (0.15) 0.15 H (3.8) Polarizing mark indicator Number of contacts indicator 10.1 A** Metal fittings (2x) 0.5 (0.15) (1.75) 2.9 0.3 2.9 (C: FPC/FFC insertion slot dimension) 0.1 1 D Note 1 : The coplanarity of each terminal lead is within 0.1. Note 2 : Slight variations in color of the plastic compounds do not affect form ,fit or function of the connector. All dimensions: mm Part Number CL No. Number of Contacts A B C D RoHS FH34S-04S-0.5SH(50) FH34S-06S-0.5SH(50) FH34S-08S-0.5SH(50) FH34S-09S-0.5SH(50) FH34S-11S-0.5SH(50) FH34S-12S-0.5SH(50) FH34S-14S-0.5SH(50) FH34S-16S-0.5SH(50) FH34S-20S-0.5SH(50) FH34S-22S-0.5SH(50) FH34S-24S-0.5SH(50) FH34S-26S-0.5SH(50) FH34S-28S-0.5SH(50) FH34S-30S-0.5SH(50) FH34S-32S-0.5SH(50) FH34S-34S-0.5SH(50) 580-1203-2-50 Reserved for product expansion 580-1204-5-50 Reserved for product expansion 580-1213-6-50 Reserved for product expansion 580-1206-0-50 580-1211-0-50 Reserved for product expansion 580-1216-4-50 Reserved for product expansion 580-1212-3-50 Reserved for product expansion 580-1201-7-50 580-1208-6-50 580-1207-3-50 4 6 8 9 11 12 14 16 20 22 24 26 28 30 32 34 04.0 05.0 06.0 06.5 07.5 08.0 09.0 10.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 01.5 02.5 03.5 04.0 05.0 05.5 06.5 07.5 09.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 02.53 03.53 04.53 05.03 06.03 06.53 07.53 08.57 10.57 11.57 12.57 13.57 14.57 15.57 16.57 17.57 03.38 04.38 05.38 05.88 06.88 07.38 08.38 09.38 11.38 12.38 13.38 14.38 15.38 16.38 17.38 18.38 YES Tape and reel packaging (5,000 pieces/reel). Order by number of reels. 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.0 be mm discontinued Please check products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (S)Series0.5 FH34 mm Pitch, abovesoon. the board Top the Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors BRecommended PCB mounting pattern and metal mask dimensions 0.650.03 (Metal mask) J Number of contacts 0.30.05 0.1 J 0.250.03 (Metal mask) (0.15) 0.80.05 (0.15) (2.9) (0.25) (0.25) 0.5 3.30.05 0.80.05 Recommended metal mask thickness: t=0.1 B (0.065) (0.185) E0.1 F0.1 (A) BRecommended FPC/FFC Dimensions G0.05 0.50.07 0. 2 B0.03 R 0.30.03 0.30.03 1.50.3 (Uncover area) 2.5MIN(Stiffener) 2- 0.50.03 *Polyimide and thermally hardening adhesive is recommended as the materials for the stiffener. Note: When using the FPC/FFC in FH34S or FH19SC connectors, the exposed area inserted in either connector is 2.5mm 0.3mm and the stiffener is 3.5mm min. All dimensions: mm 4 Part Number CL No. Number of Contacts A B E F G FH34S-04S-0.5SH(50) FH34S-06S-0.5SH(50) FH34S-08S-0.5SH(50) FH34S-09S-0.5SH(50) FH34S-11S-0.5SH(50) FH34S-12S-0.5SH(50) FH34S-14S-0.5SH(50) FH34S-16S-0.5SH(50) FH34S-20S-0.5SH(50) FH34S-22S-0.5SH(50) FH34S-24S-0.5SH(50) FH34S-26S-0.5SH(50) FH34S-28S-0.5SH(50) FH34S-30S-0.5SH(50) FH34S-32S-0.5SH(50) FH34S-34S-0.5SH(50) 580-1203-2-50 Reserved for product expansion 580-1204-5-50 Reserved for product expansion 580-1213-6-50 Reserved for product expansion 580-1206-0-50 580-1211-0-50 Reserved for product expansion 580-1216-4-50 Reserved for product expansion 580-1212-3-50 Reserved for product expansion 580-1201-7-50 580-1208-6-50 580-1207-3-50 4 6 8 9 11 12 14 16 20 22 24 26 28 30 32 34 04.0 05.0 06.0 06.5 07.5 08.0 09.0 10.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 01.5 02.5 03.5 04.0 05.0 05.5 06.5 07.5 09.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 03.1 04.1 05.1 05.6 06.6 07.1 08.1 09.1 11.1 12.1 13.1 14.1 15.1 16.1 17.1 18.1 03.9 04.9 05.9 06.4 07.4 07.9 08.9 09.9 11.9 12.9 13.9 14.9 15.9 16.9 17.9 18.9 02.5 03.5 04.5 05.0 06.0 06.5 07.5 08.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 17.5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued check products on theBack-Flip Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. (S)Series0.5 FH34 mm Pitch, 1.0soon. mmPlease above thetheboard Topstatus Contact, actuator Flexible Printed Circuit & Flexible Flat your Cable ZIF sales Connectors BPackaging Specification Embossed Carrier Tape Dimensions Tape width 24mm max. (1.95) 1.750.1 M 0.1 (P) 1.5 +0.1 0 (1.95) Unreeling direction Unreeling direction Flat surface, for placement with automatic equipment (O1 3) Reel Dimensions N 0.1 L 0.3 1. 5 O Flat surface, for placement with automatic equipment 1.7 +0.15 0 (3.2) (4) (0.3) L 0.3 (P) (0.3) 1.750.1 80.1 (2.25) M 0.1 40.1 20.15 (2.25) O1 .5 + 0 0 .1 + 0 0 .1 Embossed Carrier Tape Dimensions Tape width of 32mm min. (O80) (O380) (Q: INSIDE) (R: OUTSIDE) End section Mounting section Lead section (400mm min.) Embossed carrier tape No connector inserted (10 pockets min.) Top cover tape No connector inserted (10 pockets min.) All dimensions: mm Part Number CL No. Number of Contacts L M FH34S-04S-0.5SH(50) FH34S-06S-0.5SH(50) FH34S-08S-0.5SH(50) FH34S-09S-0.5SH(50) FH34S-11S-0.5SH(50) FH34S-12S-0.5SH(50) FH34S-14S-0.5SH(50) FH34S-16S-0.5SH(50) FH34S-20S-0.5SH(50) FH34S-22S-0.5SH(50) FH34S-24S-0.5SH(50) FH34S-26S-0.5SH(50) FH34S-28S-0.5SH(50) FH34S-30S-0.5SH(50) FH34S-32S-0.5SH(50) FH34S-34S-0.5SH(50) 580-1203-2-50 Reserved for product expansion 580-1204-5-50 Reserved for product expansion 580-1213-6-50 Reserved for product expansion 580-1206-0-50 580-1211-0-50 Reserved for product expansion 580-1216-4-50 Reserved for product expansion 580-1212-3-50 Reserved for product expansion 580-1201-7-50 580-1208-6-50 580-1207-3-50 4 6 8 9 11 12 14 16 20 22 24 26 28 30 32 34 16 16 16 16 16 24 24 24 24 24 24 24 32 32 32 32 07.5 07.5 07.5 07.5 07.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 14.2 14.2 14.2 14.2 N -- -- -- -- -- -- -- -- -- -- -- -- 28.4 28.4 28.4 28.4 P Q R 04.3 05.3 06.3 06.8 07.8 08.3 09.3 10.3 12.3 13.3 14.3 15.3 16.3 17.3 18.3 19.3 17.4 17.4 17.4 17.4 17.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 33.4 33.4 33.4 33.4 21.4 21.4 21.4 21.4 21.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 37.4 37.4 37.4 37.4 Tape and reel packaging (5,000 pieces/reel). 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.0 be mm discontinued Please check products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (S)Series0.5 FH34 mm Pitch, abovesoon. the board Top the Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors BTemperature Profile Using Lead-free Solder Paste MAX 250c HRS test condition Solder method : Reflow, IR/hot air 250 (Nihon Den-netsu Co., Ltd.'s Part Number:SENSBY NR-2) Temperature(c) 230c 200 200c Environment : Room air Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number: M705-221CM5-42-10.5) 150 150c Test board : Glass epoxy 25mm40mm0.8mm thick Land dimensions : 0.3mm0.8mm Metal mask : 0.250.650.1mm thick 100 The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may vary, depending 50 25c (60 sec.) 0 on solder paste type, volume / thickness and board size / thickness. 90 to 120 sec. Preheating Start Time (Seconds) 6 (30 sec.) Soldering Consult your solder paste and equipment manufacturer for specific recommendations. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued check products on theBack-Flip Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. (S)Series0.5 FH34 mm Pitch, 1.0soon. mmPlease above thetheboard Topstatus Contact, actuator Flexible Printed Circuit & Flexible Flat your Cable ZIF sales Connectors BRecommended FPC construction Contact FPC manufacturer for specific details. 1. Using Single-sided FPC FPC : Flexible Printed Circuit Material Name Connecting side Covering film layer Material Polyimide 1 mil thick Cover adhesive Surface treatment Copper foil Cu 1oz Base adhesive 3 35 25 1 mil thick 25 Reinforcement material adhesive Thermosetting adhesive 35 Stiffener Polyimide Polyimide 7 mil thick Total Back side 2. Using Double-sided FPC 25 25 0.2m thick gold plated over 1 to 5m thick nickel underplating Base film Material Thickness (m) 175 298 FPC : Flexible Printed Circuit Material Name Connecting side Covering layer film Material Polyimide Material Thickness (m) 1 mil thick Cover adhesive Surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating Through-hole copper Cu Copper foil Cu 15 1/2oz Base adhesive Base film Polyimide 1 mil thick 25 18 Cu 1/2oz 18 25 Cover adhesive Back side 18 18 Base adhesive Copper foil 3 Covering film layer Polyimide 1 mil thick 25 Reinforcement material adhesive Thermosetting adhesive 50 Stiffener Polyimide 4 mil thick Total 100 297 * To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is NOT RECOMMENDED. FFC : Flexible Flat Cable 3. Using FFC Material Name Connecting side Material Polyester film Adhesive 12 Thermoplastic polyester Polyester 30 12 Polyester Back side 30 35 Gold plated annealed copper foil Adhesive Material Thickness (m) Adhesive Polyester 30 Stiffener Polyester 188 Total 295 Note: Recommended FPC/FFC thickness: 0.3 0.03 mm 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will1.0 be mm discontinued Please check products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. (S)Series0.5 FH34 mm Pitch, abovesoon. the board Top the Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors BOperation and Precautions Exercise care when handling connectors. Follow recommendations given below. Operation Precautions 1. As delivered Delivered with the actuator open. There is no need to operate the actuator prior to inserting the FPC/FFC. * Do not close the actuator without the FPC/FPC inserted. 2. FPC/FFC insertion Insert the FPC/FFC with the conductive surfaces facing up. Align the FPC/FFC straight with the connector and insert it firmly all the way. FPC/FFC contact surfaces face up. * This connector is of the top contact specification. The contacts are making connection with the FPC/FFC pads from the top. Do not insert the FPC/FFC with the pads facing down. When inserting the FPC/FFC do not twist it. Insert straight. Improper insertion may cause deformation of the contacts and connection failures. * Be sure to insert the FPC/FFC when the actuator is fully open. 3. Locking After FPC/FFC insertion, rotate the actuator down to a full stop, pushing it at the center. Rotate * Do not operate the actuator by only one end. Open or close by pushing at the center. * Do not try to rotate the actuator past the fully open 90 position. This will damage the connector, preventing it from use. * Do not apply excessive force to the connector when the actuator is closed. Push at the center of the actuator. 4. FPC/FFC removal (Lock release) Carefully rotate the actuator up to 90, lifting it at the center. * Do not operate the actuator from one end only. * The actuator opens only 90. Do not attempt to open it past this angle or grasp it. * During the opening of the actuator do not press it toward the connector body. Rotate up at the center. Raise 8 Lift at the center The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued check products on theBack-Flip Hirose website RoHS search at www.hirose-connectors.com, or contact Hirose representative. (S)Series0.5 FH34 mm Pitch, 1.0soon. mmPlease above thetheboard Topstatus Contact, actuator Flexible Printed Circuit & Flexible Flat your Cable ZIF sales Connectors BPrecautions at the Design Stage (1) Route the FPC/FFC so that a direct pull force (2) Make sure that there is enough space to insert/remove the FPC/FFC straight. (3) Follow the recommendations given in this catalog in regard to mounting pattern, metal mask dimensions and FPC/FFC mating dimensions. (4) Consult the manufacturer of the FPC/FFC for the details on the flexibility of the specific FPC/FFC. (5) When designing the board lay-out and spaces in the device assure that there is enough clearances for the actuator to fully open/close. BPrecautions when mounting connectors on the PCB Handling before mounting on PCB Insertion of the FPC/FFC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED. PC board warpage Minimize the warpage as much as possible. The connector are straight within 0.1 mm max. Make sure that the mounting area flatness can accept the connector terminals without causing any failure of the solder joints. Forces on the board When braking the large PC board into individual boards exercise care NOT to damage the installed connectors. When attaching the boards or other components with the screws make sure that any stresses will NOT cause board deflections affecting the mounting areas of the connector. Connectors PCB When hand soldering: * Do not perform hand soldering with the FPC inserted in the connector. * Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * Do not use excessive amount of solder or flux compounds. Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. 9