Wire Management
Wire Management
Electro-Duct Wiring Duct
Design features for speed, easy installation and assembly.
Mounting slots Snap-Off Sidewall Fingers
Standard at no extra charge on all sizes
of duct. Two sizes of oblong mounting
holes alternating on their own 2 inch
centers. All 1 and 2 inch width duct
have one row of slots along its center
line. The 3 and 4 inch width duct have
two rows of slots.
Permits enlarging slot for lead-offs of
any size wire and/or wire bundle; forms
clean duct joints. Are pre-scored for
smooth snap-off surfaces. REQUIRES
NO TOOLS OR ANY CUTTING.
Duct Capacity Guide
Maximum recommended number of
wires used in various sizes of duct -
based on 50% fill capacity and derived
fron the following formula:
Duct W x H
Number of wires = ---------------------------------
2 x (wire O.D.)2
This chart is a guide in selecting proper
size duct. The amount may vary according
to wire installation methods.
Type BA6
Description: Specially compounded high
impact, rigid vinyl - won’t peel, chip or crack;
resists oils, grease, salt solutions, most
midly concentrated acids, fungus; non-flam-
mable, warp-proof, non-brittle; high dielec-
tric and will withstand temperatures to
150°C.
Easily cut to length - requires only a fine-
tooth hand or power cutting tool for butt or
mitred joints.
Packaging: Standard length (6’6”) 2 meter.
Sold as unit; Catalog number includes chan-
nel and cover.
Mechanical Properties
Tensile strength: 4400 lbs/sq. in.
Impact Resistance: 1.86 ft. lbs./sq. in.
Coefficient of Thermal Expansion:
2.5 x 10-5 m/m°F.
Electrical Properties
Dielectric Strength: 875 volts/mil
Surface Resistivit y: 1011 ohm
Volume Resistivit y: 1017 ohm cm.
Relative Dielectric Const ant: 3
Thermal Properties
Flammability: Self extinguishing
UL94V-0
Maintains dimensional st abilit y under
heat: .65°C i.e. .150°F as per DIN
standard #53458.
BA6 15015-(G or PW) 19 x 18 0.75 x 0.75 25 272 210
BA6 30015-(G or PW) 18 x 32 0.75 x 1.25 42 460 262
BA6 40015-(G or PW) 19 x 44 0.75 x 1.75 62 668 177
BA6 60015-(G or PW) 19 x 63 0.75 x 2.50 87 958 177
BA6 20025-(G or PW) 31 x 63 1.25 x 1.00 52 570 262
BA6 30025-(G or PW) 30 x 33 1.25 x 1.25 72 792 164
BA6 40025-(G or PW) 30 x 44 1.25 x 1.75 95 1056 157
BA6 60025-(G or PW) 30 x 65 1.25 x 2.50 140 1560 197
BA6 80025-(G or PW) 31 x 85 1.25 x 3.25 199 2108 66
BA6 40040-(G or PW) 45 x 44 1.75 x 1.75 143 1584 164
BA6 30040-(G or PW) 46 x 34 1.75 x 1.25 112 1250 157
BA6 60040-(G or PW) 46 x 65 1.75 x 2.50 215 2392 131
BA6 80040-(G or PW) 47 x 85 1.75 x 3.25 287 3196 66
BA6 40060-(G or PW) 67 x 45 2.50 x 1.75 217 2412 131
BA6 60060-(G or PW) 66 x 65 2.50 x 2.50 313 3432 78
BA6 80060-(G or PW) 67 x 85 2.50 x 3.25 410 4566 66
BA6 40080-(G or PW) 86 x 45 3.50 x 1.75 278 3096 98
BA6 60080-(G or PW) 86 X 65 3.50 X 2.50 408 4472 65
BA6 80080-(G or PW) 87 x 85 3.50 x 3.25 531 5916 52
BA6 60100-(G or PW) 107 x 65 4.25 x 2.50 524 5564 52
BA6 80100-(G or PW) 107 x 85 4.25 x 3.25 709 7900 39
BA6 40120-(G or PW) 126 x 45 5.00 x 1.75 446 4536 65
BA6 60120-(G or PW) 126 x 65 5.00 x 2.50 593 6552 39
BA6 80120-(G or PW) 127 x 45 5.00 x 3.25 776 8636 52
BA6 60150-(G or PW) 156 x 65 6.00 x 2.50 740 8112 52
BA6 60200-(G or PW) 206 x 65 8.00 x 2.50 977 10712 39
Catalog Number Dimensions (W x H) Max. No. of Capacity Std.
mm Nominal Inches 18 AWG at (mm2) Pkg.
Colors:
Available in Gray or White.
For Gray - add suffix “G”;
For White - add suffix “PW” to
catalog number. (i.e. BA615015-PW)
Sizes, Dimensions, Ordering Data (Catalog Number includes cover):
Meets JIC Requirements. U.S. Patent No. 908.985 Approved by CSA.
Description: Similar to BA6 but
fingers are formed with wire-
retaining slots.
Specifications: See previous
page for information.
Sidewalls are prescored to permit
enlarging slot for load-offs without the
need for tools or cutting.
Wire Management
Type DNG
DNG 20020-(G or PW) 0.75 x 0.75 23 210
DNG 37020-(G or PW) 0.75 x 1.50 43 105
DNG 50020-(G or PW) 0.75 x 2.00 59 65
DNG 25025-(G or PW) 1.00 x 1.00 36 157
DNG 50025-(G or PW) 1.00 x 2.00 72 59
DNG 75025-(G or PW) 1.00 x 2.75 110 104
DNG 25037-(G or PW) 1.50 x 1.00 56 157
DNG 37037-(G or PW) 1.50 x 1.50 84 131
DNG 50037-(G or PW) 1.50 x 2.00 114 157
DNG 75037-(G or PW) 1.50 x 2.75 170 66
DNG 50050-(G or PW) 2.00 x 2.00 151 157
DNG 75050-(G or PW) 2.00 x 2.75 225 79
DNG100050-(G or PW) 2.00 x 3.75 302 74
DNG 50075-(G or PW) 3.00 x 2.00 228 65
DNG 75075-(G or PW) 3.00 x 2.75 340 52
DNG100075-(G or PW) 3.00 x 3.75 456 52
DNG 50100-(G or PW) 4.00 x 2.00 305 79
DNG 75100-(G or PW) 4.00 x 2.75 454 52
DNG100100-(G or PW) 4.00 x 3.75 610 39
DNG50125-(G or PW) 4.90 x 2.00 382 52
DNG 75125-(G or PW) 4.90 x 2.75 569 39
Catalog Number Dimensions (W x H) Max. No. of Std.
Nominal Inches 18 AWG at Pkg.
50% Area Fill Ft.
(Catalog Number includes cover)
Type HNG - Noryl (Chlorine Free)
Description: For high temperature appli-
cations and where a chlorine-free envi-
ronment is desired. Includes prescored
snap-off fingers; snap-on/off cover
design; and integral slotted mounting
holes. Dimensions identical to DNG duct
sizes shown above.
Mechanical Properties
Tensile strength: 9600 psi (675) kg/cm2
Impact resistance: 6.98 ft lbs/sq in.
(<15 cm kg/cm2)
Coeffecient of thermal expansion:
59 x 106 per °C.
Electrical Properties
Dielectric strength: 500 volts/mil.
Thermal Properties
Flammability: UL94 V-1
Temperature range: -40°C to 125°C
Material: Nor yl (modified Polyphenyl
Oxide).
Color: Light Gray
Packaging: Standard length (6’6”) 2
meter. Sold complete with covers.
HNG 37037 1.50 x 1.50
HNG 50037 1.50 x 2.00
HNG 50050 2.00 x 2.00
HNG 75050 2.00 x 2.75
HNG 50075 3.00 x 2.00
HNG 75075 3.00 x 2.75
HNG 50100 4.00 x 2.00
HNG 75100 4.00 x 2.75
HNG 75125 5.00 x 2.75
Catalog Number Dimensions (W x H)
Nominal Inches
(Catalog Number includes cover)
Wire Management
VK-Flex Molded Nylon Wiring Duct (Halogen Free)
Description: A flexible wiring duct that is especially suitable for switchgear,
control panels, distribution equipment, cubicles and other areas where flexibility
of design and installation are required.
The one-piece design with its overlapping fingers, eliminates the separate
cover used with conventional duct, makes rewiring easy and lends itself to a
more efficient use of space. Open slots allow for lead-offs and because the
duct is molded, there are no sharp edges.
Each strip is fully interlocking for continuous end-to-end att achment. Molded
with slotted mounting holes, VK-FLEX is also available with a permanent, self-
adhesive backing - eliminating the need for other types of fasteners.
The open design of VK-FLEX, allowing for air circulation along with a tempera-
ture operating range of -40°C to 10 0°C (-40°F to 212°F), makes it especially suit-
able for enclosed areas where heat build-up may be a problem.
Specifications
Material: Polyamide UL94V-O
Color: Standard color is Gray VK-10 M5690 VK-10 L2212 0.43 0.59 9.84 11 15 250 10 8 5 40
VK-20 M5691 VK-20 L2222 0.90 0.83 19.68 23 21 500 20 18 13 40
VK-30 M5692 VK-30 L2232 1.30 1.22 19.68 33 31 500 57 46 30 40
VK-40 M5693 VK-40 L2242 1.69 1.77 19.68 43 45 500 101 81 53 40
Mounting Slots
Catalog Number Permanent
Self-Adhesive Strip
Catalog Number
Dimensions
(inches) (mm)
W H L W H L
Wire Capacity
#18 #16 #14
Std.
Pkg.
lengths
VK-10
side view
VK-20, 30 & 40
side view
Wire Management
Wieland Electric Inc. Wieland Electric, Inc.
49 International Road 2889 Brighton Road
Burgaw, North Carolina 28425 Oakville, Ontario L6H 6C9
Phone: (910) 259-5050 Phone: (905) 829-8414
Fax: (910) 259-3691 Fax: (905) 829-8413
sales@wielandinc.com oakville@wielandinc.com
www.wielandinc.com www.wieland-electric.ca
1-80 0-wieland (943-5263)
Wieland Electric, Inc.
U.S. North American Corporate Offices Canada
Description: The LFR trunking is flat duct made of a strong but flexible material. The LFR trunking is delivered
rolled flat in a cardboard box. When stored, the product t akes up little space so it is ideal for those unplanned
installations. The specifically designed cutter is available as an accessor y and achieves a perfect cut every
time. To guarantee a fast installation, the base of the LFR trunking is both self-adhesive and hole punched.
The unique folding system allows the cables to be held in place before closing the cover.
Specifications: Material: Rigid PVC
Packing: Packing and contents compact 20 meter rolls,
with punched base and self-adhesive tape.
(Sold in complete packages only)
Dimensions Designation Color References Packing
Height/Width (height/width)
LFR 7012 White LFR7012 09010 T2 20 m
(7 x 12) 4012740837606
LFR 15015 White LFR1501509010 T2 20 m
(15 x 5) 40127 4083 7613
LFR 20020 White LFR20020 09010 T2 20 m
(21 x 20)
LFR 20035 White LFR20035 0 9010 T2 20 m
(18 x 33)
LFR 30030 White LFR 30030 0 9010 T2 20 m
(30 x 30)
Cutter L5561 1 ea.
LFR Trunking
Wieland Electric
