For more Information
please call
1-800-Belden1
General Description:
5-position shielded DIN, used where a shielded conductor is desired and as a low cost alternative to a
D-Sub, PVC insulation, foil plus braid shield, straight handle, PVC jacket.
Physical Characteristics (Overall)
Conductor
AWG:
# Conductors AWG Stranding Conductor Material Dia. (in.)
526 19x38 TC - Tinned Copper .020
Total Number of Conductors: 5
Number of Pins: 5
Insulation
Insulation Material:
Insulation Material Wall Thickness (in.)
PVC - Polyvinyl Chloride 0.014
Connector Characteristics
Connector Characteristic (not terminated) Drain
Wire Solder Dip:
.25 +/- .125
Connector Characteristics (not Terminated)
Jacket Removal Dimension:
1 +/- .125
Connector Characteristics - First End # of
Connector Contacts/positions:
5
Connector Characteristics - First End Connector
Gender:
Male
Connector Characteristics - First End Connector
Shielding Type:
Metal Backshell
Connector Characteristics - First End Connector
Type:
DIN
Connector Characteristics - First End Overmold
Color:
Black
Connector Characteristics - First End Overmold
Compound Material:
PVC
Connector Characteristics - First End Overmold
Type:
5 Position DIN with Flex Tail
Connector Characteristics - Second End
Connector Type:
No Connector
Outer Shield
Outer Shield Material:
Layer # Outer Shield Trade Name Type Outer Shield Material Coverage (%)
1Beldfoil® Tape Aluminum Foil-Polyester Tape 100
2 Braid TC - Tinned Copper 90
Outer Shield Drain Wire AWG:
AWG Stranding Drain Wire Conductor Material
26 19x38 TC - Tinned Copper
Page 1 of 3 10-14-2013
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
49153A Molded Cable Assemblies - DIN Cable Assembly
Outer Jacket
Outer Jacket Material:
Outer Jacket Material Nom. Wall Thickness (in.)
PVC - Polyvinyl Chloride 0.037
Overall Cable
Overall Nominal Diameter: 0.231 in.
Assembly Dimensional
Assembly Dimensional Length: 10
Wiring
Wiring: Shield to Connector Shell
Wiring Diagram Color Code Chart:
Number Color
1Brown
2Red
3Orange
4Yellow
5Green
Mechanical Characteristics (Overall)
UL Temperature Rating: 80°C (UL AWM Style 2464)
Applicable Specifications and Agency Compliance (Overall)
Applicable Standards & Environmental Programs
NEC/(UL) Specification: CM (cable only)
AWM Specification: UL Style 2464 (300 V 80°C) (cable only)
EU Directive 2000/53/EC (ELV): Yes
EU Directive 2002/95/EC (RoHS): Yes
EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005
EU Directive 2002/96/EC (WEEE): Yes
EU Directive 2003/11/EC (BFR): Yes
CA Prop 65 (CJ for Wire & Cable): Yes
MII Order #39 (China RoHS): Yes
Flame Test
UL Flame Test: VW-1 (Cable only)
Plenum/Non-Plenum
Plenum (Y/N): No
Electrical Characteristics (Overall)
Max. Operating Voltage - UL:
Voltage
300 V RMS (UL AWM Style 2464)
Notes (Overall)
Notes: Foil and braid shielded for high-noise environments. Outer jacket stripped one inch.
Put Ups and Colors:
Item # Putup Ship Weight Color Notes Item Desc
49153A 010S2 1 EA 0.500 LB BLACK 5 POS DIN STRAIGHT RI37896
Page 2 of 3 10-14-2013
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
49153A Molded Cable Assemblies - DIN Cable Assembly
Revision Number: 1 Revision Date: 09-19-2008
© 2013 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications
described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not
ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,
statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or
exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,
negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the
compliance date may be in stock at Belden facilities and in our Distributor’s inventory. The information provided in this Product Disclosure, and
the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden’s knowledge,
information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide
for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not
to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for
determining the applicability of legislation and regulations based on their individual usage of the product.
Page 3 of 3 10-14-2013
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
49153A Molded Cable Assemblies - DIN Cable Assembly
