https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Screw connection with tension sleeve, number of positions: 1, load current: 232 A, cross section: 25 mm-95 mm, connection direction of the conductor to plug-in direction: 0 , width: 25 mm, color: gray The figure shows a 6-position version Your advantages Easy grouping with engagement pin versions Both terminal halves can be easily assembled by simply snapping them together Automatic compensation of the panel thickness via the snap principle integrated in the insulation housing Universal screw connection with screw locking Spacer plates increase clearances and creepage distances Well-known connection principle allows worldwide use Low temperature rise, thanks to maximum contact force Tool-free snap-in principle enables easy mounting on the device panel Automatic panel thickness compensation enables universal use Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4017918117047 Weight per Piece (excluding packing) 247.440 g Custom tariff number 85369010 Country of origin Greece 12/15/2020Page1/9 https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Technical data Item properties Brief article description Panel feed-through terminal block Range of articles HDFK 95 Pitch 25 mm Number of positions 1 Number of connections 2 Number of potentials 1 Electrical parameters Nominal current 232 A Nom. voltage 1000 V (With metal panels of 1 mm ... 2.5 mm) Maximum load current 232 A (with 95 mm conductor cross section) Rated voltage (III/3) 1000 V Rated surge voltage (III/3) 8 kV 2 Connection capacity, external Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction 0 Conductor cross section solid 25 mm ... 95 mm Conductor cross section flexible 35 mm ... 95 mm Conductor cross section flexible, with ferrule without plastic sleeve 25 mm ... 95 mm Conductor cross section, flexible, with ferrule, with plastic sleeve 25 mm ... 95 mm 2 conductors with same cross section, solid 16 mm ... 35 mm 2 conductors with same cross section, flexible 16 mm ... 35 mm 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 16 mm ... 35 mm Internal cylindrical gage B12 Stripping length 27 mm Torque 15 Nm ... 20 Nm Connection capacity, internal Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction 0 Conductor cross section solid 25 mm ... 95 mm Conductor cross section flexible 35 mm ... 95 mm Conductor cross section flexible, with ferrule without plastic sleeve 25 mm ... 95 mm Conductor cross section, flexible, with ferrule, with plastic sleeve 25 mm ... 95 mm 2 conductors with same cross section, solid 16 mm ... 35 mm 2 conductors with same cross section, flexible 16 mm ... 35 mm 12/15/2020Page2/9 https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Technical data Connection capacity, internal 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 16 mm ... 35 mm Internal cylindrical gage B12 Stripping length 27 mm Torque 15 Nm ... 20 Nm Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics tin-plated Material data - housing Housing color gray (7042) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN60695-2-12 850 Glow wire ignition temperature GWIT according to EN60695-2-13 775 Temperature for the ball pressure test according to EN60695-10-2 125 C Dimensions for the product Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center Length [ l ] 95.4 mm Width [ w ] 25 mm Height [ h ] 74 mm Pitch 25 mm Dimensions for mounting cutout Plate thickness 1 mm ... 6 mm Packaging information Type of packaging packed in cardboard Pieces per package 10 Denomination packing units Pcs. General product information Type of note Notes on safety 12/15/2020Page3/9 https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Technical data General product information Note The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness. Type of note Notes on safety Note The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness. Termination and connection method Test for conductor damage and slackening IEC60947-7-1:2009-04 Test passed Pull-out test Pull-out test IEC60947-7-1:2009-04 Conductor cross section / conductor type / tensile force 25 mm / stranded / > 135 N 35 mm / flexible / > 190 N 95 mm / stranded / > 351 N 95 mm / flexible / > 351 N Mechanical tests according to standard Test specification IEC 60947-7-1 (in parts) Electrical tests Rated current 232 A Conductor cross section 95 mm Air clearances and creepage distances Clearances and creepage distances Metal wall 1.0mm...2.5mm IEC60947-7-1:2009-04 Application Metal wall 1.0mm...2.5mm Specification IEC60947-7-1:2009-04 Minimum clearance - inhomogeneous field (III/3) 8 mm Minimum creepage distance value (III/3) 12.5 mm Temperature-rise test Specification IEC60947-7-1:2009-04 Requirement temperature-rise test Increase in temperature 45 K Standards and Regulations Connection in acc. with standard CSA IEC60947-7-1 Flammability rating according to UL 94 V0 Safety note * Only electrically qualified personnel may install and operate the product. 12/15/2020Page4/9 https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Technical data Standards and Regulations To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering. * Observe the technical data provided here and refer to the documents listed under "Downloads". The download area contains important information, such as installation notes, technical drawings, and 3D data. * The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection. Glow-wire test Specification IEC 60695-2-11:2000-10 Temperature 960 C Time of exposure 30 s Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Dimensional drawing Dimensional drawing 21 49,5 6,6 17,2 25 21 36 26 10 43,3 73,9 26 73,9 17,2 45 4,5 1-6 * Dimensions when using the DP-HDFK 95/15 spacer plate Classifications eCl@ss eCl@ss 10.0.1 27141134 eCl@ss 11.0 27141134 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 12/15/2020Page5/9 https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Classifications eCl@ss eCl@ss 6.0 27141100 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 eCl@ss 9.0 27141134 ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC001283 ETIM 5.0 EC001283 ETIM 6.0 EC001283 ETIM 7.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / UL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC Ex Approvals Approval details 12/15/2020Page6/9 https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Approvals CSA http://www.csagroup.org/services-industries/product-listing/ B C Nominal voltage UN 600 V 600 V Nominal current IN 230 A 230 A mm/AWG/kcmil 2 2 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C Nominal voltage UN 600 V 600 V Nominal current IN 230 A 230 A mm/AWG/kcmil 4 4 IECEE CB Scheme http://www.iecee.org/ Nominal voltage UN 630 V Nominal current IN 232 A mm/AWG/kcmil 95 VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 630 V Nominal current IN 232 A mm/AWG/kcmil 35-95 EAC 13631 E60425-19890329 DE1-50176 40030029 B.01687 Accessories Accessories 12/15/2020Page7/9 https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Accessories Labeled terminal marker Marker for terminal blocks-UC-TM 12 CUS-0824613 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Zack marker strip-ZB 12 CUS-0824942 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5 Zack marker strip-ZB 12,LGS:L1-N,PE-0812146 Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5 Mounting material Insertion profile-UKH 95 EP-3009231 Insertion profile, color: silver Terminal marking 12/15/2020Page8/9 https://www.phoenixcontact.com/us/products/0709534 Panel feed-through terminal block-HDFK 95-0709534 Accessories Marker for terminal blocks-UC-TM 12-0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Zack marker strip-ZB 12:UNPRINTED-0812120 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm, Number of individual labels: 5 Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 12/15/2020Page9/9