SZSMF14AT1G - ON Semiconductor

 Semiconductor Components Industries, LLC, 2012

February, 2012 − Rev. 4

1Publication Order Number:

SMF05C/D

SMF05CT1G, SMF12CT1G,

SMF15CT1G, SMF24CT1G,

SZSMF12CT1G

5-Line Transient Voltage

Suppressor Array

This 5−line voltage transient suppressor array is designed for

application requiring transient voltage protection capability. It is

intended for use in over−transient voltage and ESD sensitive

equipment such as computers, printers, automotive electronics,

networking communication and other applications. This device

features a monolithic common anode design which protects five

independent lines in a single SC−88 package.

Features

Protects up to 5−Line in a Single SC−88 Package

Peak Power Dissipation − 100 W (8 x 20 ms Waveform)

ESD Rating of Class 3B (Exceeding 8 kV) per Human Body Model

and Class C (Exceeding 400 V) per Machine Model.

Compliance with IEC 61000−4−2 (ESD) 15 kV (Air), 8 kV (Contact)

Flammability Rating of UL 94 V−0

SZ Prefix for Automotive and Other Applications Requiring Unique

Site and Control Change Requirements; AEC−Q101 Qualified and

PPAP Capable

Pb−Free Packages are Available*

Applications

Hand−Held Portable Applications

Networking and Telecom

Automotive Electronics

Serial and Parallel Ports

Notebooks, Desktops, Servers

MAXIMUM RATINGS (TJ = 25C unless otherwise specified)

Symbol Rating Value Unit

PPK 1 Peak Power Dissipation

8 x 20 ms Double Exponential Waveform

(Note 1)

100

TJOperating Junction Temperature Range −40 to 125 C

TSTG Storage Temperature Range −55 to 150 C

TLLead Solder Temperature (10 s) 260 C

ESD Human Body Model (HBM)

Machine Model (MM)

IEC 61000−4−2 Air (ESD)

IEC 61000−4−2 Contact (ESD)

16000

400

15000

Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended

Operating Conditions is not implied. Extended exposure to stresses above the

Recommended Operating Conditions may affect device reliability.

1. Nonrepetitive current pulse per Figure 3.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

SC−88 FIVE TRANSIENT

VOLTAGE SUPPRESSOR

100 W PEAK POWER

SC−88

CASE 419B

STYLE 24

MARKING DIAGRAM

PIN ASSIGNMENT

PIN 1. CATHODE

2. ANODE

3. CATHODE

4. CATHODE

5. CATHODE

6. CATHODE

http://onsemi.com

XX = Specific Device Code

6J = SMF05C

6K = SZSMF12C/SMF12C

6L = SMF15C

6M= SMF24C

M = Date Code

G=Pb−Free Package

XX MG

See detailed ordering and shipping information in the package

dimensions section on page 3 of this data sheet.

ORDERING INFORMATION

SMF05CT1G, SMF12CT1G, SMF15CT1G, SMF24CT1G, SZSMF12CT1G

http://onsemi.com

SMF05CT1G ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified)

Parameter Symbol Conditions Min Typ Max Unit

Reverse Working Voltage VRWM (Note 2) 5.0 V

Breakdown Voltage VBR IT = 1 mA, (Note 3) 6.2 7.2 V

Reverse Leakage Current IRVRWM = 5 V 0.07 5.0 mA

Clamping Voltage VCIPP = 5 A (8 x 20 ms Waveform) 9.8 V

Clamping Voltage VCIPP = 8 A (8 x 20 ms Waveform) 12.5 V

Maximum Peak Pulse Current IPP 8 x 20 ms Waveform 8.0 A

Capacitance CJVR = 0 V, f = 1 MHz (Line to GND) 80 130 pF

SMF12CT1G ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified)

Parameter Symbol Conditions Min Typ Max Unit

Reverse Working Voltage VRWM (Note 2) 12 V

Breakdown Voltage VBR IT = 1 mA, (Note 3) 13.3 15 V

Reverse Leakage Current IRVRWM = 12 V 0.01 0.1 mA

Clamping Voltage VCIPP = 3 A (8 x 20 ms Waveform) 21 V

Clamping Voltage VCIPP = 6 A (8 x 20 ms Waveform) 23 V

Maximum Peak Pulse Current IPP 8 x 20 ms Waveform 6.0 A

Capacitance CJVR = 0 V, f = 1 MHz (Line to GND) 40 60 pF

SMF15CT1G ELECTRICAL CHARACTERISTICS (TJ = 25C, unless otherwise specified)

Parameter Symbol Conditions Min Typ Max Unit

Reverse Working Voltage VRWM (Note 2) 15 V

Breakdown Voltage VBR IT = 1 mA, (Note 3) 17 19 V

Reverse Leakage Current IRVRWM = 15 V 0.01 1.0 mA

Clamping Voltage VCIPP = 1 A (8 x 20 ms Waveform) 23 V

Clamping Voltage VCIPP = 5 A (8 x 20 ms Waveform) 29 V

Maximum Peak Pulse Current IPP 8 x 20 ms Waveform 5.0 A

Capacitance CJVR = 0 V, f = 1 MHz (Line to GND) 33 45 pF

SMF24CT1G ELECTRICAL CHARACTERISTICS (TJ = 25C, unless otherwise specified)

Parameter Symbol Conditions Min Typ Max Unit

Reverse Working Voltage VRWM (Note 2) 24 V

Breakdown Voltage VBR IT = 1 mA, (Note 3) 26.7 32 V

Reverse Leakage Current IRVRWM = 24 V 0.01 1.0 mA

Clamping Voltage VCIPP = 1 A (8 x 20 ms Waveform) 40 V

Clamping Voltage VCIPP = 2.5 A (8 x 20 ms Waveform) 44 V

Maximum Peak Pulse Current IPP 8 x 20 ms Waveform 2.5 A

Capacitance CJVR = 0 V, f = 1 MHz (Line to GND) 21 25 pF

2. TVS devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal or greater than the DC

or continuous peak operating voltage level.

3. VBR is measured at pulse test current IT

4. Include SZ-prefix devices where applicable.

SMF05CT1G, SMF12CT1G, SMF15CT1G, SMF24CT1G, SZSMF12CT1G

http://onsemi.com

TYPICAL PERFORMANCE CURVES

(TJ = 25C unless otherwise specified)

Figure 1. Pulse Derating Curve

100

00 25 50 75 100 125 150 175 200

TA, AMBIENT TEMPERATURE (C)

Figure 2. 8  20 ms Pulse Waveform

100

00204060

t, TIME (ms)

% OF PEAK PULSE CURRENT

PULSE WIDTH (tP) IS DEFINED

AS THAT POINT WHERE THE

PEAK CURRENT DECAY = 8 ms

PEAK VALUE IRSM @ 8 ms

HALF VALUE IRSM/2 @ 20 ms

Figure 3. Clamping Voltage vs Peak Pulse Current

100

10510

IPP

, PEAK PULSE CURRENT (A)

VCLAMP

, CLAMPING VOLTAGE (V)

Figure 4. Junction Capacitance vs Reverse Voltage

100

105

VBR, REVERSE VOLTAGE (V)

JUNCTION CAPACITANCE (pF)

10 15 20 25

SMF05CT1G

SMF12CT1G

SMF15CT1G

SMF24CT1G

SMF05CT1G

SMF12CT1G

SMF15CT1G

SMF24CT1G

PEAK POWER DISSIPATION (%)

ORDERING INFORMATION

Device Package Shipping†

SMF05CT1G SC−88

(Pb−Free)

3,000 / Tape & Reel

SMF05CT2G* SC−88

(Pb−Free)

3,000 / Tape & Reel

SMF12CT1G SC−88

(Pb−Free)

3,000 / Tape & Reel

SMF15CT1G SC−88

(Pb−Free)

3,000 / Tape & Reel

SMF24CT1G SC−88

(Pb−Free)

3,000 / Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*The “T2” suffix refers to an alternate tape & reel orientation.

SMF05CT1G, SMF12CT1G, SMF15CT1G, SMF24CT1G, SZSMF12CT1G

http://onsemi.com

PACKAGE DIMENSIONS

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. 419B−01 OBSOLETE, NEW STANDARD 419B−02.

E0.2 (0.008) MM

123

654

−E−

b6 PL

SC−88/SC70−6/SOT−363

CASE 419B−02

ISSUE W

DIM MIN NOM MAX

MILLIMETERS

A0.80 0.95 1.10

A1 0.00 0.05 0.10

b0.10 0.21 0.30

C0.10 0.14 0.25

D1.80 2.00 2.20

0.031 0.037 0.043

0.000 0.002 0.004

0.004 0.008 0.012

0.004 0.005 0.010

0.070 0.078 0.086

MIN NOM MAX

INCHES

0.20 REF 0.008 REF

E1.15 1.25 1.35

e0.65 BSC

L0.10 0.20 0.30

2.00 2.10 2.20

0.045 0.049 0.053

0.026 BSC

0.004 0.008 0.012

0.078 0.082 0.086

STYLE 24:

PIN 1. CATHODE

2. ANODE

3. CATHODE

4. CATHODE

5. CATHODE

6. CATHODE

ǒmm

inchesǓ

SCALE 20:1

0.65

0.025

0.65

0.025

0.50

0.0197

0.40

0.0157

1.9

0.0748

*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering and

Mounting Techniques Reference Manual, SOLDERRM/D.

SOLDERING FOOTPRINT*

SC−88/SC70−6/SOT−363

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

SMF05C/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative