MPLAD15KP7.0A - MPLAD15KP200CA Available Surface Mount 15,000 Watt Transient Voltage Suppressor High-Reliability screening available in reference to MIL-PRF-19500 DESCRIPTION These high power 15 kW rated transient voltage suppressors in a surface mount package are provided with design features to minimize thermal resistance and cumulative heating. Typical applications include lightning and automotive load dump protection. They are particularly effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This efficient low profile package design is offered in standoff voltage selections (V WM ) of 7 volts to 200 volts in either unidirectional or bidirectional construction. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * Available in both unidirectional and bidirectional construction (bidirectional with CA suffix) High reliability with wafer fabrication and assembly lot traceability * All parts surge tested * Low profile surface mount package * Optional upscreening is available with various screening and conformance inspection options based on MIL-PRF-19500. Refer to Hirel Non-Hermetic Product Portfolio for more details on the screening options. * Suppresses transients up to 15,000 W @ 10/1000 s (see Figure 1) * Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B * RoHS compliant versions are available * 3 lot norm screening performed on standby current (I D ) PLAD (The cathode is the metal base under the body of this device.) Also available: PLAD30KP (30,000 watts) MPLAD30KP14A thru MPLAD30KP400CA APPLICATIONS / BENEFITS * * * * * * * Protection from switching transients and induced RFI Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance: Class 1,2,3,4,5: MPLAD15KP7.0A to 200CA Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance: Class 1,2,3,4: MPLAD15KP7.0A to 200CA Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance: Class 2,3: MPLAD15KP7.0A to 200CA Class 4: MPLAD15KP5.0 to 54CA Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 s at 25 C)*: Level 4: MPLAD15KP7.0A to 200CA Level 5: MPLAD15KP7.0A to 100CA Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 s at 25 C)*: Level 4: MPLAD15KP7.0A to 28CA *See MicroNote 132 for further temperature derating selection. MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01004, Rev F (5/16/14) (c)2013 Microsemi Corporation Page 1 of 6 MPLAD15KP7.0A - MPLAD15KP200CA o MAXIMUM RATINGS @ 25 C unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case Peak Pulse Power @ 10/1000 s (2) Value Unit T J and T STG R JA R JC P PP -55 to +150 50 0.7 15,000 <100 <5 2.0 1500 260 (1) 2.5 (4) 71 C/W C/W C/W W ps ns V A C W W Unidirectional Bidirectional t clamping (0 volts to V (BR) min) Forward Clamping Voltage @ 500 Amps (3) Forward Surge Current Solder Temperature @ 10 s (5) Steady-State Power dissipation Notes: 1. 2. 3. 4. 5. Symbol (3) T A = 25 C T C = 100 C V FS I FSM T SP PD When mounted on FR4 PC board with recommended mounting pad (see pad layout). Also see Figures 1 and 2. With impulse repetition rate (duty factor) of 0.05% or less. At 8.3 ms half-sine wave (unidirectional devices only). Case temperature controlled on heat sink as specified. See MicroNote 134 for derating P PP when also applying steady-state power. MECHANICAL and PACKAGING * * * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readily solderable per MIL-STD-750, method 2026. MARKING: Body marked with part number POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom) Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL: Standard per EIA-481-B (add "TR" suffix to part number). Consult factory for quantities. WEIGHT: Approximately 1 gram See Package Dimensions on last page. PART NOMENCLATURE M PLAD 15K P 7.0 CA Reliability Level* M MA MX MXL *(see Hirel Non-Hermetic Product Portfolio) RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Polarity A = Unidirectional CA = Bidirectional Package Designation Reverse Standoff Voltage P PP Rating (W) RF01004, Rev F (5/16/14) (e3) Plastic (c)2013 Microsemi Corporation Page 2 of 6 MPLAD15KP7.0A - MPLAD15KP200CA SYMBOLS & DEFINITIONS Definition Symbol I (BR) ID I PP V (BR) VC V WM V(BR) Breakdown Current: The current used for measuring breakdown voltage V (BR) . Standby Current: The current at the rated standoff voltage V WM . Peak Impulse Current: The peak current during the impulse. Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Clamping Voltage: Clamping voltage at I PP (peak pulse current) at the specified pulse conditions (typically shown as maximum value). Rated Working Standoff Voltage: The maximum peak voltage that can be applied over the operating temperature range. Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by change in temperature. ELECTRICAL CHARACTERISTICS @ 25 C unless otherwise stated MICROSEMI PART NUMBER Unidirectional MPLAD15KP7.0A MPLAD15KP7.5A MPLAD15KP8.0A MPLAD15KP8.5A MPLAD15KP9.0A MPLAD15KP10A MPLAD15KP11A MPLAD15KP12A MPLAD15KP13A MPLAD15KP14A MPLAD15KP15A MPLAD15KP16A MPLAD15KP17A MPLAD15KP18A MPLAD15KP20A MPLAD15KP22A MPLAD15KP24A MPLAD15KP26A MPLAD15KP28A MPLAD15KP30A MPLAD15KP33A MPLAD15KP36A MPLAD15KP40A MPLAD15KP43A MPLAD15KP45A MPLAD15KP48A MPLAD15KP51A MPLAD15KP54A MPLAD15KP58A MPLAD15KP60A MPLAD15KP64A MPLAD15KP70A MPLAD15KP75A MPLAD15KP78A MPLAD15KP85A MPLAD15KP90A MPLAD15KP100A MPLAD15KP110A MPLAD15KP120A MPLAD15KP130A MPLAD15KP150A MPLAD15KP160A MPLAD15KP170A MPLAD15KP180A MPLAD15KP200A Bidirectional MPLAD15KP7.0CA MPLAD15KP7.5CA MPLAD15KP8.0CA MPLAD15KP8.5CA MPLAD15KP9.0CA MPLAD15KP10CA MPLAD15KP11CA MPLAD15KP12CA MPLAD15KP13CA MPLAD15KP14CA MPLAD15KP15CA MPLAD15KP16CA MPLAD15KP17CA MPLAD15KP18CA MPLAD15KP20CA MPLAD15KP22CA MPLAD15KP24CA MPLAD15KP26CA MPLAD15KP28CA MPLAD15KP30CA MPLAD15KP33CA MPLAD15KP36CA MPLAD15KP40CA MPLAD15KP43CA MPLAD15KP45CA MPLAD15KP48CA MPLAD15KP51CA MPLAD15KP54CA MPLAD15KP58CA MPLAD15KP60CA MPLAD15KP64CA MPLAD15KP70CA MPLAD15KP75CA MPLAD15KP78CA MPLAD15KP85CA MPLAD15KP90CA MPLAD15KP100CA MPLAD15KP110CA MPLAD15KP120CA MPLAD15KP130CA MPLAD15KP150CA MPLAD15KP160CA MPLAD15KP170CA MPLAD15KP180CA MPLAD15KP200CA REVERSE STANDOFF VOLTAGE V WM (Note 1) BREAKDOWN VOLTAGE Volts V (BR) I Volts 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 180 200 7.78 - 8.60 8.33 - 9.21 8.89 - 9.83 9.44 - 10.4 10.0 - 11.1 11.1 - 12.3 12.2 - 13.5 13.3 - 14.7 14.4 - 15.9 15.6 - 17.2 16.7 - 18.5 17.8 - 19.7 18.9 - 20.9 20.0 - 22.1 22.2 - 24.5 24.4 - 26.9 26.7 - 29.5 28.9 - 31.9 31.1 - 34.4 33.3 - 36.8 36.7 - 40.6 40.0 - 44.2 44.4 - 49.1 47.8 - 52.8 50.0 - 55.3 53.3 - 58.9 56.7 - 62.7 60.0 - 66.3 64.4 - 71.2 66.7 - 73.7 71.1 - 78.6 77.8 - 86.0 83.3 - 92.1 86.7 - 95.8 94.4 - 104.0 100 - 111 111 - 123 122 - 135 133 - 147 144 - 159 167 - 185 178 - 197 189 - 209 200 - 221 222 - 245 MAXIMUM CLAMPING VOLTAGE V C @ I PP MAXIMUM STANDBY CURRENT I D @ V WM @ MAXIMUM PEAK PULSE CURRENT I PP (FIG. 3) MAXIMUM TEMPERATURE COEFFICIENT V(BR) mA Volts A A mV/ C 150 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.5 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 291 322 3000 750 450 150 60 45 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1251* 1164* 1101* 1041* 975 882 822 753 696 645 618 576 543 516 462 423 384 357 330 309 282 258 234 216 207 195 183 171 159 156 147 132 123 120 108 102 93 84 78 71 62 58 55 52 47 5.0 6.0 6.0 7.0 8.0 9.0 10 11 12 13 15 16 18 19 22 24 27 29 30 35 38 40 45 49 51 55 60 64 69 70 75 84 90 94 102 109 122 132 145 157 183 195 207 219 243 NOTE 1: Transient Voltage Suppressors are normally selected with reverse standoff voltage V WM , which should be equal to or greater than the peak operating voltage. NOTE 2: Items listed in bold above are available ex-stock or with a short lead-time. * Surge Testing is performed to 1000Amps due to Equipment limitations RF01004, Rev F (5/16/14) (c)2013 Microsemi Corporation Page 3 of 6 MPLAD15KP7.0A - MPLAD15KP200CA PPP Peak Pulse Power -kW GRAPHS tp - Pulse Time - sec IPP Peak Pulse Current - % IPP FIGURE 1 Peak Pulse Power vs. Pulse Time (to 50% of exponentially decaying pulse) Test waveform parameters: tr = 10 s, tp = 1000 s Figure 2 Pulse Waveform RF01004, Rev F (5/16/14) (c)2013 Microsemi Corporation Page 4 of 6 MPLAD15KP7.0A - MPLAD15KP200CA PPP Peak Pulse Power -kW GRAPHS (continued) T L Lead Temperature C FIGURE 3 Derating Curve RF01004, Rev F (5/16/14) (c)2013 Microsemi Corporation Page 5 of 6 MPLAD15KP7.0A - MPLAD15KP200CA PACKAGE DIMENSIONS Ref. A1 A2 B C D F G H J r1 r2 Dimensions Inch Millimeters Min Max Min Max 0.485 0.495 12.32 12.57 0.445 0.455 11.30 11.56 0.145 0.155 3.68 3.94 0.585 0.595 14.86 15.11 0.200 0.210 5.08 5.33 0.008 0.013 0.20 0.33 0.055 0.065 1.40 1.65 0.015 0.025 0.38 0.64 0.062 TYP. 1.57 TYP. 0.030 TYP. 0.76 TYP. 0.045 TYP. 1.14 TYP. PAD LAYOUT Ref. A B C D RF01004, Rev F (5/16/14) Dimensions Inch Millimeters Min Max Min Max 0.465 0.475 11.81 12.07 0.225 0.235 5.72 5.97 0.095 0.105 2.41 2.67 0.04 0.05 1.02 1.27 (c)2013 Microsemi Corporation Page 6 of 6