MPLAD15KP7.0A –
MPLAD15KP200CA
Available Surface Mount 15,000 Watt
Transient Voltage Suppressor
High-Reliability
screening available in
reference to
MIL-PRF-19500
DESCRIPTION
These high power 15 kW rated transient voltage suppressors in a surface mount package are
provided with design features to minimize thermal resistance and cumulative heating. Typical
applications include lightning and automotive load dump protection. They are particularly effective at
meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This
efficient low profile package design is offered in standoff voltage selections (VWM) of 7 volts to
200 volts in either unidirectional or bidirectional construction.
PLAD
(The cathode is the metal b ase
under the body of this device.)
Also available:
PLAD30KP
(30,000 watts)
MPLAD30KP14A thru
MPLAD30KP400CA
Important: For the latest inform ation, vis it our website http://www.microsemi.com.
FEATURES
• Available in both unidirectional and bidir ect ion al con struction (bidirectional with CA suffix)
• High reliability with wafer fabrication and assembly lot traceability
• All parts surge tested
• Low profile surface mount package
• Optional upscreening is available with various screening and conformance inspection options based
on MIL-PRF-19500. Refer to Hirel Non-Hermetic Product Portfolio for more detail s on the screenin g
options.
• Suppresses transients up to 15,000 W @ 10/1000 μs (see Figure 1)
• Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
• RoHS compliant versions are available
• 3σ lot norm screening performed on standby current (ID)
APPLICATIONS / BENEFITS
• Protect ion from swit ching tr an sien ts and indu ced RFI
• Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
• Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedan ce:
Class 1,2,3,4,5: M PLA D15K P7.0A to 200CA
• Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedan ce:
Class 1,2,3,4: MPLAD15KP7.0A to 200CA
• Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance:
Class 2,3: MPLAD15KP7.0A to 200CA
Class 4: MPLAD15KP5.0 to 54CA
• Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs at 25 ºC)*:
Level 4: MPLAD15KP 7.0A to 200CA
Level 5: MPLAD15KP 7.0A to 100CA
• Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs at 25 ºC)*:
Level 4: MPLAD15KP7.0A to 28CA
*See MicroNote 132 for further temperature derating selection.
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
RF01004, Rev F (5/16/14) ©2013 Microsemi Corporation Page 1 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
MAXIMUM RATINGS @ 25 oC unless otherwise specified
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-55 to +150
ºC/W
Thermal Resi stan ce Jun cti on-to-Ambient (1)
RӨJA
50
ºC/W
Thermal Resi stan ce Jun cti on-to-Case
RӨJC
0.7
ºC/W
Peak Pulse Power @ 10/1000 µs (2)
PPP
15,000
W
tclamping (0 volts to V(BR) min) Unidirectional
<100
<5
ps
ns
Forward Clamping Voltage @ 500 Amps (3)
VFS
2.0
V
Forward Surge Current (3)
IFSM
1500
A
Solder Temperature @ 10 s
TSP
260
ºC
Steady-State Power dissipation
(5)
TA = 25 °C
TC = 100 °C
PD 2.5
(1)
71
(4)
W
W
Notes: 1 . When mounted on FR4 PC board with recommended mounting pad (see pad layout).
2. Also see Figures 1 and 2. With impulse repetiti on rate (duty factor) of 0.05% or less.
3. At 8.3 ms half-sine wave (unidirectional devices onl y).
4. Case tem perature c ontroll ed on heat sink as specified.
5. See MicroNote 134 for derat i ng PPP when also applyi ng st eady-stat e power.
MECHANICAL and PACKAGING
• CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0
• TERMINALS: Tin-lead or RoHS compli ant anne ale d matte-tin plating readily solderable per MIL-STD-750, method 2026.
• MARKING: Body marked with part number
• POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom)
• Available in bulk or cus tom tape-and-reel packaging
• TAPE-AND-REEL: Standard per EIA-481-B (add “TR” suffix to part number). Consult factory for quantities.
• WEIGHT: Approximately 1 gram
• See Package Dimensions on last page.
PART NOMENCLATURE
M PLAD 15K P 7.0 CA (e3)
Reliability Level*
M
MA
MX
MXL
*(see Hirel Non-Hermetic
Product Portfolio)
Package Designation
PPP Rating (W)
RoHS Compli ance
e3 = RoHS compliant
Blank = non-RoHS compliant
Polarity
A = Unidirectional
CA = Bidirectional
Reverse Standoff Voltage
Plastic
RF01004, Rev F (5/16/14) ©2013 Microsemi Corporation Page 2 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
SYMBOLS & DEFINITIONS
Symbol
Definition
I(BR)
Breakdown Current: The current used for measuring breakdown voltage V(BR).
ID
Standby Current: The current at the rated standoff voltage VWM.
IPP
Peak Impulse Current: The peak current during the impulse.
V(BR)
Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
VC
Clamping Voltage: Clamping voltage at I
PP
(peak pulse current) at the specified pulse conditions (typically shown as
maximum value).
VWM
Rated Working Standoff Voltage: The maximum peak voltage that can be applied over the operating temperature
range.
α
V(BR)
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by change in temperature.
ELECTRICAL CHARACTERISTICS @ 25 ºC unless otherwise stated
MICROSEMI PART NUMBER
REVERSE
STANDOFF
VOLTAGE
VWM
(Note 1)
BREAKDOWN
VOLTAGE
V(BR) @
I
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
MAXIMUM
STANDBY
CURRENT
ID @ VWM
MAXIMUM
PEAK
PULSE
CURRENT
IPP
(FIG . 3 )
MAXIMUM
TEMPERATURE
COEFFICIENT
αV(BR)
Unidirectional
Bidirectional
Volts
Volts
mA
Volts
µA
A
mV/ ºC
MPLAD15KP7.0A
MPLAD15KP7.0CA
7.0
7.78 – 8.60
150
12.0
3000
1251*
5.0
MPLAD15KP7.5A
MPLAD15KP8.0A
MPLAD15KP7.5CA
MPLAD15KP8.0CA
7.5
8.0
8.33 – 9.21
8.89 – 9.83
5
5
12.9
13.6
750
450
1164*
1101*
6.0
6.0
MPLAD15KP8.5A
MPLAD15KP9.0A
MPLAD15KP8.5CA
MPLAD15KP9.0CA
8.5
9.0
9.44 – 10.4
10.0 – 11.1
5
5
14.4
15.4
150
60
1041*
975
7.0
8.0
MPLAD15KP10A
MPLAD15KP11A
MPLAD15KP10CA
MPLAD15KP11CA
10
11
11.1 – 12.3
12.2 – 13.5
5
5
17.0
18.2
45
10
882
822
9.0
10
MPLAD15KP12A
MPLAD15KP13A
MPLAD15KP12CA
MPLAD15KP13CA
12
13
13.3 – 14.7
14.4 – 15.9
5
5
19.9
21.5
10
10
753
696
11
12
MPLAD15KP14A
MPLAD15KP15A
MPLAD15KP14CA
MPLAD15KP15CA
14
15
15.6 – 17.2
16.7 – 18.5
5
5
23.2
24.4
10
10
645
618
13
15
MPLAD15KP16A
MPLAD15KP17A
MPLAD15KP16CA
MPLAD15KP17CA
16
17
17.8 – 19.7
18.9 – 20.9
5
5
26.0
27.6
10
10
576
543
16
18
MPLAD15KP18A
MPLAD15KP20A
MPLAD15KP18CA
MPLAD15KP20CA
18
20
20.0 – 22.1
22.2 – 24.5
5
5
29.2
32.4
10
10
516
462
19
22
MPLAD15KP22A
MPLAD15KP24A
MPLAD15KP22CA
MPLAD15KP24CA
22
24
24.4 – 26.9
26.7 – 29.5
5
5
35.5
38.9
10
10
423
384
24
27
MPLAD15KP26A
MPLAD15KP28A
MPLAD15KP26CA
MPLAD15KP28CA
26
28
28.9 – 31.9
31.1 – 34.4
5
5
42.1
45.5
10
10
357
330
29
30
MPLAD15KP30A
MPLAD15KP33A
MPLAD15KP30CA
MPLAD15KP33CA
30
33
33.3 – 36.8
36.7 – 40.6
5
5
48.4
53.3
10
10
309
282
35
38
MPLAD15KP36A
MPLAD15KP40A
MPLAD15KP36CA
MPLAD15KP40CA
36
40
40.0 – 44.2
44.4 – 49.1
5
5
58.1
64.5
10
10
258
234
40
45
MPLAD15KP43A
MPLAD15KP45A
MPLAD15KP43CA
MPLAD15KP45CA
43
45
47.8 – 52.8
50.0 – 55.3
5
5
69.4
72.7
10
10
216
207
49
51
MPLAD15KP48A
MPLAD15KP51A
MPLAD15KP48CA
MPLAD15KP51CA
48
51
53.3 – 58.9
56.7 – 62.7
5
5
77.4
82.4
10
10
195
183
55
60
MPLAD15KP54A
MPLAD15KP58A
MPLAD15KP54CA
MPLAD15KP58CA
54
58
60.0 – 66.3
64.4 – 71.2
5
5
87.1
93.6
10
10
171
159
64
69
MPLAD15KP60A
MPLAD15KP64A
MPLAD15KP60CA
MPLAD15KP64CA
60
64
66.7 – 73.7
71.1 – 78.6
5
5
96.8
103
10
10
156
147
70
75
MPLAD15KP70A
MPLAD15KP75A
MPLAD15KP70CA
MPLAD15KP75CA
70
75
77.8 – 86.0
83.3 – 92.1
5
5
113
121
10
10
132
123
84
90
MPLAD15KP78A
MPLAD15KP85A
MPLAD15KP78CA
MPLAD15KP85CA
78
85
86.7 – 95.8
94.4 – 104.0
5
5
126
137
10
10
120
108
94
102
MPLAD15KP90A
MPLAD15KP100A
MPLAD15KP90CA
MPLAD15KP100CA
90
100
100 – 111
111 – 123
5
5
146
162
10
10
102
93
109
122
MPLAD15KP110A
MPLAD15KP120A
MPLAD15KP110CA
MPLAD15KP120CA
110
120
122 – 135
133 – 147
5
5
177
193
10
10
84
78
132
145
MPLAD15KP130A
MPLAD15KP150A
MPLAD15KP130CA
MPLAD15KP150CA
130
150
144 – 159
167 – 185
5
5
209
243
10
10
71
62
157
183
MPLAD15KP160A
MPLAD15KP170A
MPLAD15KP160CA
MPLAD15KP170CA
160
170
178 – 197
189 – 209
5
5
259
275
10
10
58
55
195
207
MPLAD15KP180A
MPLAD15KP200A
MPLAD15KP180CA
MPLAD15KP200CA
180
200
200 – 221
222 – 245
5
5
291
322
10
10
52
47
219
243
NOTE 1: Transient Voltage Suppressors are normally s elected with reverse s tandoff voltage VWM, which should be equal to or greater than the
peak operating voltage.
NOTE 2: Items liste d in bold above are available ex-stock or with a short lead-time.
* Surge Testing is performed to 1000Amps due to Equipment limit ations
RF01004, Rev F (5/16/14) ©2013 Microsemi Corporation Page 3 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
GRAPHS
tp – Pulse Time – sec
FIGURE 1
Peak Pulse Power vs. Pulse Time
(to 50% of exponentially decaying pulse)
Test waveform parameters: tr = 10 µs, tp = 1000 µs
Figure 2
Pulse Waveform
I
PP
Peak Pulse Current - % I
PP
P
PP
Peak Pulse Power -kW
RF01004, Rev F (5/16/14) ©2013 Microsemi Corporation Page 4 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
GRAPHS (continued)
TL Lead Temperature ºC
FIGURE 3
Derating Curve
PPP Peak Pulse Power -kW
RF01004, Rev F (5/16/14) ©2013 Microsemi Corporation Page 5 of 6
MPLAD15KP7.0A –
MPLAD15KP200CA
PACKAGE DIMENSIONS
Ref.
Dimensions
Inch
Millimeters
Min
Max
Min
Max
A1
0.485
0.495
12.32
12.57
A2
0.445
0.455
11.30
11.56
B
0.145
0.155
3.68
3.94
C
0.585
0.595
14.86
15.11
D
0.200
0.210
5.08
5.33
F
0.008
0.013
0.20
0.33
G
0.055
0.065
1.40
1.65
H
0.015
0.025
0.38
0.64
J
0.062 TYP.
1.57 TYP.
r1
0.030 TYP.
0.76 TYP.
r2
0.045 TYP.
1.14 TYP.
PAD LAYOUT
Ref.
Dimensions
Inch
Millimeters
Min
Max
Min
Max
A
0.465
0.475
11.81
12.07
B
0.225
0.235
5.72
5.97
C
0.095
0.105
2.41
2.67
D
0.04
0.05
1.02
1.27
RF01004, Rev F (5/16/14) ©2013 Microsemi Corporation Page 6 of 6