REV. 6/3/05 rT L = [18.67] | r ss [16.13] Wx 7 UNS. 103 [262)-| ++4+ +t 4p 722 [18.34] MAX | 530 [13.46] MAX P 040 [1.02] 050 [1.27] TYP TOL NON-ACCUM 025 [0.64] + 100 [2.54] TYP = TOL NON-ACCUM & 9.035 [0.89] (10) 125 [3.17}.010 [0.25] 250 [6.35] 9128 [3.25] 25] (5 7125 [3.18] FF 9.062 [1.57] (2) LL 450 [11 ie #610 [15.49] 120 [3. J P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE TOLERANCE +.003 [0.08] UNLESS OTHERWISE SPECIFIED D4 ~~ ~~ cH NOTES: DATE REV ECN APP'D. BY 1/24/06 AO 7448 JM 1. CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V0 CONTACTS/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER 2. FOR PRODUCT SPECIFICATIONS SEE PRO22-01. 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. 4, THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE USER THE ABILITY TO HAVE REASONABLE JACK/PANEL CLEARANCES, YET MAINTAIN GROUNDING CAPABILITY. THESE VARIABLES CAN BE ADJUSTED IN EITHER DIRECTION BUT MAY CARRY SOME CONSEQUENCES IN THE FORM OF LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES. 30 MICRO-INCHES [0.76um] SS-641010SA-FLS1 01-A111 CONTACT PLATING IN MATING AREA PART NUMBER THIRD ANGLE PROJECTION -4 Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com DO NOT SCALE DRAWING o 2002/95/EC DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE TEN CONTACT, TEN POSTION, SHIELDED SHORT VERSION JACK FLANGED, ALT. SOLDER TAIL LOC., TOP PANEL GROUND AT 15 DIMENSIONS: INCHES [METRIC] UNLESS OTHERWISE SPECIFIED TOLERANCES ARE +.005 [0.13] ANGLES ARE + 1 SHEET NO. 1 OF 1 THIS DRAWING AND THE SUBVECT MATTER SHOWN THEREON | RN BY: ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT DWG NO. MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. KRL |" 1/24/06 JM 1-26-06 REV. C1640122 AO 1 AutoCAD