HS053 Series Assemblies
•
82.5 a mp AC output @ 40°C
•
Single Channel or 3 Phase output
•
3 to 32 VDC input control voltage
•
Panel mounted
•
uL, CSA, VDE, CE approved SSRs
PRODUCT SELECTION
Description 82.5 A 82.5 A 82.5 A
3-32 VDC Control HS053-D24125 HS053-HD60125 HS053-D53TP50D
OUTPUT SPECIFICATIONS (1)
Description HS053-D24125 HS053-HD60125 HS053-D53TP50D
Operating Voltage (47-63Hz) [Vrms] 24-280 48-660 48-530
Transient Overvoltage [Vpk] 600 1200 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500
Maximum Load Current [Arms] 82.5 82.5 82.5
Minimum Load Current [Arms] 0.04 0.04 0.05
Maximum Surge Current (16.6ms) [Apk] 1200 1200 250
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.7 1.6
Maximum I²t for Fusing (8.3 msec) [A² sec] 6000 6000 260
Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5
INPUT SPECIFICATIONS (1)
Description HS053-D24125 HS053-HD60125 HS053-D53TP50D
Control Voltage Range 3-32 VDC 3-32 VDC 3-32 VDC
Minimum T urn -On Voltage 3.0 VDC 3.0 VDC 3.0 VDC
Minimum Tu rn -Of f Volta ge 1.0 VDC 1.0 VDC 1.0 VDC
Maximum Reverse Voltage 32 VDC 32 VDC 32 VD C
Typical Input Current 3.4 mA @ 5 VDC 2.0 mA (3) 10 mA @ 5 VDC
Nominal Input Impeadance 1500 Ohms See Note 3 450 Ohms
Maximum Turn-On Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle
Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle
GENERAL SPECIFICATIONS
Description HS053-Dxx125 HS053-D53TP50D
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 4000 Vrms
Minimum Insulation Resistance (@ 500 V DC) 109 Ohm 109 Ohm
Maximum Capacitance, Input/Output 8 pF 10 pF
Ambient Operating Temperature Range -40 to 80°C -40 to 80°C
Ambient Storage Temperature Range -40 to 125°C -40 to 125°C
Status Indicator Display None None
Weight (typical) 3.33 lb. (1510g) 3.78 lb. (1739g)
Encapsulation Themall y Conductive Epoxy Themally Conductive Epoxy
Recommended Terminal Screw Torque Range: 6-32 Screws - 10 in/lbs. 8-32 Screws -
20 in/lbs. (Screws dry without grease) 6-32 Screws - 10 in/lbs. 8-32 Screws -
20 in/lbs. (Screws dry without grease)
Thermal pad installed Yes Yes
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Input circuitr y for DC cont rol versi on incor po rat es activ e current lim iter (HD model onl y)
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
A
gency approvals are for relay only.
E116949 (D24125) E116950 (HD60125, D53TP50D) LR81689 (all)
10143 UG (D24125, HD60125) 5941 UG (D53TP50D)
Rev. 120111
ANNEX - ENVIROMENTAL INFORMATION
