SCOPE: IMPROVED, QUAD, SPST, CMOS ANALOG MULTIPLEXER
Device Type Generic Number
01 DG441A(x)/883B
02 DG442A(x)/883B
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
Outline Letter Mil-Std-1835 Case Outline Package Code
K GDIP1-T16 or CDIP2-T16 16 LEAD CERDIP J16
Z CQCC1-N20 20-Pin Ceramic LCC L20
A bsol ute Maximum Ratings
Voltage Referenced to V-
V+ to V- .............................................................................................................................. 44V
V- to GND .......................................................................................................................... 25V
VL ................................................................................................... (GND-0.3V) to V+ +0.3V)
Digital Inputs, VS, VD 1/ ..........................................................................(V -) -2V to (V+ )+2V
or 30mA whichever occurs first
Continuous Current, Any terminal .................................................................................. 30mA
Peak Current, S or D (Pulsed at 1ms, 10% duty cycle max) ......................................... 100mA
Lead Temperature (soldering, 10 seconds) ........................................................................ +300°C
Storage Temperature ........................................................................................... -65°C to +150°C
Continuous Power Dissipation ........................................................................…….... TA=+70°C
16 lead CERDIP(derate 10.0mW/°C above +70°C) ...............................................…….. 800mW
20 lead LCC (derate 9.1mW/°C above +70°C) ......................................................…….. 727mW
Junct ion Temperature TJ ....................................................................................………. +150°C
Thermal Resista nce, J unction to Case, ΘJC:
Case Outline 16 lead CERDIP...............................................................…….... 50°C/W
Case Outline 20 lead LCC .....................................................................……... 20°C/W
Thermal Resistance, Junction to Ambient, ΘJA:
Case Outline 16 lead CERDIP.............................................................…….... 100°C/W
Case Outline 20 lead LCC ...................................................................……... 110°C/W
Recommended Operating Co ndit ions
Ambient Operating Range (TA) .........................................................……….. -55°C to +125°C
Positive Supply Voltage (V+) ...............................................................................………... +15V
Negative Supply Voltage (V-) ..............................................................................……….... -15V
VAL (max) .............................................................................................................…….…... 0.8V
VAH (min) .............................................................................................................……….... 2.4V
NOTE 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current
to maximum current ratings.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated in the operational section s of the sp ecifica tions is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
---------------------------- Electrical Characteristics of DG441A/DG442A/883B 19-0093 Rev. C
Page 2 of 6