Directed Energy, Inc. An DE150-101N09A IXYS Company RF Power MOSFET Preliminary Data Sheet N-Channel Enhancement Mode Avalanche Rated Low Qg and Rg High dv/dt Nanosecond Switching Symbol Test Conditions Maximum Ratings VDSS TJ = 25C to 150C 100 V VDGR TJ = 25C to 150C; RGS = 1 M 100 V VGS Continuous 20 V VGSM Transient 30 V ID25 Tc = 25C 9.0 A IDM Tc = 25C, pulse width limited by TJM 54 A IAR Tc = 25C 14 A EAR Tc = 25C 7.5 mJ 5.5 V/ns dv/dt IS IDM, di/dt 100A/s, VDD VDSS, Tj 150C, RG = 0.2 >200 V/ns 80 W 3.5 W -55...+150 C TJM 150 C Tstg -55...+150 C 300 C 2 g IS = 0 PDHS Tc = 25C Derate 4.4W/C above 25C PDAMB Tc = 25C TJ TL 1.6mm (0.063 in) from case for 10 s Weight Symbol Test Conditions Characteristic Values TJ = 25C unless otherwise specified min. VDSS VGS = 0 V, ID = 3 ma 100 VGS(th) VDS = VGS, ID = 4 ma 2 IGSS VGS = 20 VDC, VDS = 0 IDSS VDS = 0.8 VDSS TJ = 25C TJ = 125C VGS = 0 RDS(on) VGS = 15 V, ID = 0.5ID25 Pulse test, t 300S, duty cycle d 2% gfs VDS = 15 V, ID = 0.5ID25, pulse test 4.6 typ. max. V 3 8.0 4 V 100 nA 25 250 A A 0.16 S VDSS = 100 V ID25 = 9.0 A RDS(on) = 0.16 PDHS = 80W DRAIN GATE SG1 SG2 SD1 SD2 Features * Isolated Substrate - high isolation voltage (>2500V) - excellent thermal transfer - Increased temperature and power * * - - * * * cycling capability IXYS advanced low Qg process Low gate charge and capacitances easier to drive faster switching Low RDS(on) Very low insertion inductance (<2nH) No beryllium oxide (BeO) or other hazardous materials Advantages * Optimized for RF and high speed switching at frequencies to >100MHz * Easy to mount--no insulators needed * High power density Directed Energy, Inc. An DE150-101N09A IXYS Company Symbol Test Conditions RF Power MOSFET Characteristic Values (TJ = 25C unless otherwise specified) min. typ. max. 5 RG 650 pF 160 pF Crss 15 pF Td(on) 4 ns 4 ns 4 ns 4 ns Ciss Coss Ton Td(off) VGS = 0 V, VDS = 0.8 VDSS(max), f = 1 MHz VGS = 15 V, VDS = 0.8 VDSS ID = 0.5 IDM RG = 0.2 (External) Toff Qg(on) Qgs VGS = 10 V, VDS = 0.5 VDSS ID = 0.5 ID25 Qgd 12 35 nC 2.5 10 nC 5.0 15 nC 1.5 RthJHS Source-Drain Diode K/W Characteristic Values (TJ = 25C unless otherwise specified) Symbol Test Conditions min. IS VGS = 0 V ISM Repetitive; pulse width limited by TJM VSD IF = IS, VGS = 0 V, Pulse test, t 300 s, duty cycle 2% typ. max. 9.0 A 54 A 1.5 V 300 Trr ns Directed Energy, Inc. reserves the right to change limits, test conditions and dimensions. DEI MOSFETS are covered by one or more of the following U.S. patents: 4,835,592 4,850,072 4,881,106 4,891,686 4,931,844 5,017,508 5,034,796 5,049,961 5,063,307 5,187,117 5,237,481 5,486,715 5,381,025 5,640,045 Directed Energy, Inc. An IXYS Company DE150-101N09A RF Power MOSFET 201N09A DE-SERIES SPICE Model The DE-SERIES SPICE Model is illustrated in Figure 1. The model is an expansion of the SPICE level 3 MOSFET model. It includes the stray inductive terms LG, LS and LD. Rd is the RDS(ON) of the device, Rds is the resistive leakage term. The output capacitance, COSS, and reverse transfer capacitance, CRSS are modeled with reversed biased diodes. This provides a varactor type response necessary for a high power device model. The turn on delay and the turn off delay are adjusted via Ron and Roff. Figure 1 DE-SERIES SPICE Model This SPICE model may be downloaded as a text file from the DEI web site at www.directedenergy.com/spice.htm Net List: *SYM=POWMOSN .SUBCKT 101N09A 10 20 30 * TERMINALS: D G S * 100 Volt 9 Amp .16 ohm N-Channel Power MOSFET 10-30-2001 M1 1 2 3 3 DMOS L=1U W=1U RON 5 6 1.5 DON 6 2 D1 ROF 5 7 .2 DOF 2 7 D1 D1CRS 2 8 D2 D2CRS 1 8 D2 CGS 2 3 .6N RD 4 1 .16 DCOS 3 1 D3 RDS 1 3 5.0MEG LS 3 30 .1N LD 10 4 1N LG 20 5 1N .MODEL DMOS NMOS (LEVEL=3 VTO=3.0 KP=9.0) .MODEL D1 D (IS=.5F CJO=1P BV=100 M=.5 VJ=.6 TT=1N) .MODEL D2 D (IS=.5F CJO=1100P BV=500 M=.5 VJ=.6 TT=1N RS=10M) .MODEL D3 D (IS=.5F CJO=300P BV=500 M=.3 VJ=.4 TT=400N RS=10M) .ENDS Doc #9200-0242 Rev 1 (c) 2001 Directed Energy, Inc. Directed Energy, Inc. An IXYS Company 2401 Research Blvd., Suite 108 Fort Collins, CO USA 80526 970-493-1901 Fax: 970-493-1903 Email: deiinfo@directedenergy.com Web: http://www.directedenergy.com