19-4271; Rev 0; 9/08 MAX16826 Evaluation Kit The MAX16826 evaluation kit (EV kit) provides a proven design to evaluate the MAX16826, a four-string, I2C programmable high-brightness LED (HB LED) driver with PWM dimming control. The EV kit also includes Windows (R) 2000/XP/Vista (R)-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX16826. The MAX16826 EV kit PCB comes with a MAX16826ATJ+ installed. The EV kit is configured in a boost application. This EV kit can be modified by changing component values on the board for other configurations (including RGB LED applications). Refer to the MAX16826 IC data sheet for more information. LED Driver Board Specification PARAMETER Configuration DESCRIPTION 7 white LEDs/string Number of Strings 4 strings LED Current Adjustment Range Total Maximum LED Power VIN (min) 50mA to 150mA 16.8W 7.5V VIN (max) Features o Four Independently Controllable LED Strings o 7 LEDs Per String Configuration o Independently Programmable 50mA to 150mA String Current o 7.5V to 22V Input Voltage o Can Withstand Automotive Load Dump Up to 40V for 400ms o 0% to 100% DIM Duty Cycle Range o Shorted LED Protection and Detection o Open LED String Detection o Adaptive Boost-Stage Voltage Optimization o Convenient Breakaway LED Driver Board Easily Adaptable to End Application o Low Mechanical Profile o Windows 2000/XP/Vista (32-Bit)-Compatible Software o USB-PC Interface o USB-to-I2C On-Board Circuitry o Fully Assembled and Tested o Lead-Free and RoHS Compliant 22V Load Dump Ordering Information 40V for < 400ms Nominal Boost Voltage Adjustment Range Nominal OVP Trip Threshold Boost Stage Switching Frequency 22.4V to 32V 35V PART TYPE MAX16826EVKIT+ EV Kit +Denotes lead-free and RoHS compliant. 350kHz Component List DESIGNATION QTY C1, C2, C3, C5- C8, C12, C15, C17, C23, C24 12 C9 1 C10, C11 2 C13, C14, C18-C21 6 C16, C25 2 DESCRIPTION 100nF 10%, 16V X7R ceramic capacitors (0603) TDK C1608X7R1C104K 33nF 10%, 50V X7R ceramic capacitor (0603) TDK C1608X7R1H333K 22pF 5%, 50V C0G ceramic capacitors (0603) TDK C1608C0G1H220J 1F 10%, 16V X7R ceramic capacitors (0603) TDK C1608X7R1C105K 10F 10%, 10V X5R ceramic capacitors (1210) Murata GRM32FR61A106K DESIGNATION QTY C26, C28 2 C27 1 C29 1 C30 1 C32 1 DESCRIPTION 10F 20%, 50V X5R ceramic capacitors (2220) Murata GRM55DR61H106K 10F 20%, 50V X7S ceramic capacitor (1210) Taiyo Yuden UMK325BJ106MM-T 2.2nF 5%, 50V C0G ceramic capacitor (0603) Murata GRM1885C1H222K 1F 10%, 50V X7R ceramic capacitor (1210) Murata GRM32RR71H105K 4.7F 10%, 6.3V X5R ceramic capacitor (0603) Murata GRM188R60J475K Windows and Windows Vista are registered trademarks of Microsoft Corp. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 Evaluates: MAX16826 General Description Evaluates: MAX16826 MAX16826 Evaluation Kit Component List (continued) DESIGNATION QTY C33 1 C34, C35 2 C36, C37 0 C38 1 C39 1 C40 1 C41-C44 4 C45 0 D1 1 J1 1 J2, J3 JU2-JU8 0 7 L1 1 L2 1 LED1 1 P1, P2 P3 2 1 Q1 1 Q2-Q5 4 R1 R2 R3, R9, R10 R4, R5 R6 R7 R8 R11 1 1 3 2 1 1 1 1 DESCRIPTION 2200pF 10%, 50V X7R ceramic capacitor (0402) Murata GRM155R71H222K 47F 20%, 50V electrolytic capacitors Panasonic EEE-FK1H470XP Not installed, capacitors (0603) 1000pF 5%, 50V C0G ceramic capacitor (0402) Murata GRM1555C1H102JA01D 220pF 5%, 50V C0G ceramic capacitor (0402) Murata GRM1555C1H221J 100pF 5%, 50V C0G ceramic capacitor (0402) Murata GRM1555C1H101J 0.01F 10%, 50V X7R ceramic capacitors (0402) Murata GRM155R71H103K Not installed, capacitor (0402) 60V, 1A Schottky diode (SMB) Diodes, Inc. B160B-13-F USB series-B right-angle PC-mount receptacle Not installed 3-pin headers Ferrite bead (0603) TDK MMZ1608R301A 22H 20%, 5A, 52m inductor Coilcraft MSS1260-223Ml Red LED (0603) Panasonic LNJ208R8ARA Connectors, FFC/FPC 18-pos, 1mm Connector, FFC/FPC 6-pos, 1mm 40V, 9A, 2.5W n-channel MOSFET (8 SO) International Rectifier IRF7469 55V, 1.9A, 160m n-channel MOSFETs (SOT223) International Rectifier IRFL014NPbF 220 5% resistor (0603) 2.2k 5% resistor (0603) 1.5k 5% resistors (0603) 27 5% resistors (0603) 470 5% resistor (0603) 100k 5% resistor (0603) 7.5k 1% resistor (0603) 68 1%, 0.25W resistor (1206) DESIGNATION QTY DESCRIPTION R12 1 R13 R14, R16 R15 R17 R18 R19 R20, R22, R24, R26 1 2 1 1 1 1 0.04 1%, 0.5W sense resistor (2010) Vishay/Dale WSL2010R0400FEA 215k 1% resistor (0402) 10k 1% resistors (0402) 249k 1% resistor (0402) 1.27k 1% resistor (0603) 182k 1% resistor (0603) 2k 1% resistor (0402) 4 100k 1% resistors (0402) R21, R23, R25, R27 4 16.5k 1% resistors (0402) R28-R31 4 R32, R33 R34-R37 R38 R39 R40 R41-R44 2 4 1 1 1 4 U1 1 U2, U8 2 Microcontrollers (68 QFN-EP*) Maxim MAXQ2000-RAX+ U3 1 UART-to-USB converter (32 TQFP) FTDI FT232BL U4 1 U5 1 U6 1 U7 1 Y1 1 Y2 1 -- 1 -- 7 -- 1 -- 1 2.2 1%, 100mW sense resistors (0603) Panasonic ECG ERJ-3RQF2R2V 0 5% resistors (0603) 0 5% resistors (0402) 12.1 1% resistor (0805) 470 5% resistor (0402) 10k 5% resistor (0603) 237k 1% resistors (0603) LED driver (32 TQFN) Maxim MAX16826ATJ+ 93C46A 3-wire EEPROM (8 SO) Atmel AT93C46A-10SU-2.7 p-channel MOSFET power switch (8 SO) Maxim MAX890LESA+ LDO regulator (5 SC70) Maxim MAX8511EXK25+T LDO regulator (5 SC70) Maxim MAX8511EXK33+T 20MHz crystal oscillator 6MHz crystal Hong Kong X'tals SSL6000000E18FAF Cable, flat flex 18-position, 1mm, 5in Shunts USB high-speed A-to-B cable, 5ft (1.5m) PCB: MAX16828 Evaluation Kit+ *Exposed pad. 2 _______________________________________________________________________________________ MAX16826 Evaluation Kit SUPPLIER PHONE Coilcraft, Inc. 847-639-6400 WEBSITE www.coilcraft.com Diodes, Inc. 805-446-4800 www.diodes.com Hong Kong X'tals Ltd. 852-35112388 www.hongkongcrystal.com International Rectifier 310-322-3331 www.irf.com Murata Electronics North America, Inc. 770-436-1300 www.murata-northamerica.com Panasonic Corp. 800-344-2112 www.panasonic.com Taiyo Yuden 800-348-2496 www.t-yuden.com TDK Corp. 847-803-6100 www.component.tdk.com Vishay/Dale 402-563-6866 www.vishay.com Note: Indicate that you are using the MAX16826 when contacting these component suppliers. MAX16826 EV Kit Files FILE DESCRIPTION Installs the EV kit files on your computer INSTALL.EXE MAX16826.EXE Application program FTDIBUS.INF USB device driver file FTDIPORT.INF VCP device driver file UNINST.INI Uninstalls the EV kit software USB_Driver_Help.PDF USB driver installation help file Quick Start Recommended Equipment Before beginning, the following equipment is needed: * MAX16826 EV kit (USB cable included) * A user-supplied Windows 2000/XP/Vista PC with a spare USB port * 7V to 24V, 5A DC power supply * Four strings of white LEDs (7 LEDs/string) Note: In the following sections, software-related items are identified by bolding. Text in bold refers to items directly from the EV kit software. Text in bold and underlined refers to items from the Windows operating system Procedure The MAX16826 EV kit is fully assembled and tested. Follow the steps below to verify board operation: 1) Visit www.maxim-ic.com/evkitsoftware to download the latest version of the EV kit software, 16826Rxx.ZIP (xx in the filename denotes the soft- ware version number). Save the EV kit software to a temporary folder and uncompress the ZIP file. 2) Install the EV kit software on your computer by running the INSTALL.EXE program inside the temporary folder. The program files are copied and icons are created in the Windows Start | Programs menu. 3) Verify that all jumpers (JU2-JU8) are in their default positions, as shown in Table 1. 4) Connect the USB cable from the PC to the EV kit board. A New Hardware Found window pops up when installing the USB driver for the first time. If you do not see a window that is similar to the one described above after 30 seconds, remove the USB cable from the board and reconnect it. Administrator privileges are required to install the USB device driver on Windows. 5) Follow the directions of the Add New Hardware Wizard to install the USB device driver. Choose the Search for the best driver for your device option. Specify the location of the device driver to be C:\Program Files\MAX16826 (default installation directory) using the Browse button. During device driver installation, Windows may show a warning message indicating that the device driver Maxim uses does not contain a digital signature. This is not an error condition and it is safe to proceed with installation. Refer to the USB_Driver_Help.PDF document included with the software for additional information. 6) Set the output of the power supply to 12V. Turn off the power supply. 7) Connect the positive terminal of the power supply to the VIN pad of the LED driver board. _______________________________________________________________________________________ 3 Evaluates: MAX16826 Component Suppliers Evaluates: MAX16826 MAX16826 Evaluation Kit 8) Connect the negative terminal of the power supply to the PGND pad of the LED driver board. 9) Ensure that the supplied ribbon cable is firmly connected to the P1 and P2 connectors. 10) Connect the anode ends of the LED strings to the P3-1 pin of the P3 connector. 11) Connect the cathode ends of the LED strings to the P3-2 to P3-5 pins of the P3 connector. 12) Turn on the power supply 13) Start the MAX16826 EV kit software by opening its icon in the Start | Programs menu. The EV kit software main window appears, as shown in Figure 1. 14) Press the Start button to start the LED driver. 15) Verify that all of the LEDs are lit. Table 1. MAX16826 EV Kit Jumper Descriptions (JU2-JU8) JUMPER JU2 JU3 JU4 JU5 JU6 JU7 JU8 SHUNT POSITION 1-2* DESCRIPTION On-board PWM signal for Ch1 2-3 Connect user-supplied PWM signal for Ch1 to the on-board DIM1 pad 1-2* On-board PWM signal for Ch2 2-3 Connect user-supplied PWM signal for Ch2 to the on-board DIM2 pad 1-2* MAX16826 SDA signal connected to on-board microcontroller 2-3 Connect user-supplied SDA signal to the on-board SDA pad 1-2* MAX16826 SCL signal connected to on-board microcontroller 2-3 Connect user-supplied SCL signal to the on-board SCL pad 1-2* MAX16826 SYNC/EN signal connected to on-board microcontroller 2-3 Connect user-supplied SYNC/EN signal to the on-board SYNC/EN pad 1-2* On-board PWM signal for Ch3 2-3 Connect user-supplied PWM signal for Ch3 to the on-board DIM3 pad 1-2* On-board PWM signal for Ch4 2-3 Connect user-supplied PWM signal for Ch4 to the on-board DIM4 pad *Default position. 4 _______________________________________________________________________________________ MAX16826 Evaluation Kit The MAX16826 evaluation kit software has all the functions to evaluate the MAX16826 IC. To start the MAX16826 EV kit software, click Start | Programs | Maxim MAX16826 Evaluation Kit | Maxim MAX16826 Evaluation Kit that is created during installation. The GUI main window appears as shown in Figure 1. Figure 1. MAX16826 EV Kit Software Main Window _______________________________________________________________________________________ 5 Evaluates: MAX16826 Detailed Description of Software Evaluates: MAX16826 MAX16826 Evaluation Kit String Current Set The String Current Set group box is located at the upper left corner of the main window. Use the scrollbars to adjust the current of the LED strings. The corresponding values of the current will be shown in the adjacent edit boxes. Press the Read button to read the values from the linear regulator output registers of the MAX16826. The equivalent values of the output current will be shown in the edit boxes. Boost Output Control The Boost Output Control Mode group box has the functions to control the boost output voltage. To control the boost output voltage manually, click on the radio button next to the Manual Control group box. Use the scrollbar to adjust the output voltage, and the voltage value will be displayed in the adjacent edit box. The actual boost output voltage can be seen in the Read Back Values group box. To use the software automatic control, click on the radio button next to the Software Control group box. The edit box next to the Set button is used to change the Drain to GND regulated voltage of the current sink FETs on the LED string with the highest voltage drop. This voltage setting will depend on how much overhead the user is willing to have. If the set value is too low, the LED currents will no longer be well regulated and may indeed drop because the boost voltage might fall too low. The scrollbar in this mode will move automatically to compensate and regulate the output voltage. The update rate is approximately once per second. In any case, the channel with the lowest voltage across the sink FET will be regulated to the value in the edit box. DIM Pulse Width Modulation (DPWM) The DPWM group box is located at the center of the main window. The four DIM PWM signals generated by the on-board MAXQ2000 microcontrollers are used to control the brightness of the LEDs. Adjust the scrollbars in the DPWM Duty Cycle group box to change the duty cycles of the PWM signals and the values of the duty cycle (%) are shown in the adjacent edit boxes. Check the Set All Channels to 100% Duty Cycle checkbox to force all channel duty cycles to 100%. In the DPWM Frequency group box, change the DPWM frequency by adjusting the scrollbar position and press the Set button. The frequency value will be shown in the edit box. To guarantee that the leading edge of all the DIM signals are synchronized, press the Set button in the DPWM Frequency group box. Press the Start button to start to generate the PWM signals. 6 Press the Stop button to stop all PWM signals. Status The Status group box is located at the right of the main window. The software reads the external FET drain voltage measurements, and the boost output voltage measurement from the ADC output registers of the MAX16826. The software multiplies the measured values by the appropriate scaling factor and then displays them in the Read Back Values group box. Enter the values into the edit boxes in the Fault Level Set group box to set the fault-detection values. When the value in the Read Back Values group box is less than the fault-detection value, then the color of the read-back value changes to dark green. When the read-back value is 0 to 10% higher than the fault-detection value, the read-back value turns a lime color. If the read-back value is more than 10% higher than the faultdetection value, then the read-back value turns purple. The read-back value turns red when it is more than 20% higher than the fault-detection value. The software also reads the fault register to detect the fault conditions. If a fault condition exists, it will be shown in the String Fault Status group box. See Table 2 for the fault-condition explanations. Table 2. Fault Conditions FAULT NAME TO CONDITION ADC conversion timeout; also corresponds to open string condition* Open LED string open Short LED string shorted OVP Overvoltage *Open LED string detection may require multiple flag examination. Press the Read button to update the Status group box. By checking the Automatic Read checkbox, the Status group box will be automatically updated every second. Enable/Disable The Enable/Disable group box controls the signal on the SYNC/EN pin. Click on the Enable radio button to set the signal high and enable the MAX16826. Click on the Disable radio button to set the signal low and disable the MAX16826. Standby Check the Standby checkbox to set the MAX16826 to standby mode. Refer to the MAX16826 IC data sheet for more information regarding standby mode. _______________________________________________________________________________________ MAX16826 Evaluation Kit See Table 3 for the formulas for the scaling factors. These values can be used for calibration against actual read values with external instruments. When the default values are changed, they are stored in the software. Re-enter the default values to bring the software back to the default setting. Table 3. Scaling Factor FORMULA DEFAULT VALUE DR1 (ADC read-back voltage across Drain and GND for the sink FET on Ch1) 1 + (R20/R21) 7.046 DR2 (ADC read-back voltage across Drain and GND for the sink FET on Ch2) 1 + (R22/R23) 7.046 DR3 (ADC read-back voltage across Drain and GND for the sink FET on Ch3) 1 + (R24/R25) 7.046 DR4 (ADC read-back voltage across Drain and GND for the sink FET on Ch4) 1 + (R26/R27) 7.046 Read Back VBoost (ADC readback boost output voltage) 1 + (R15/R16) 25.900 String Current Set Ch1 (LED string current for Ch1) R31 2.200 String Current Set Ch2 (LED string current for Ch2) R30 2.200 String Current Set Ch3 (LED string current for Ch3) R29 2.200 String Current Set Ch4 (LED string current for Ch4) R28 2.200 VBoost (Boost output voltage) 1 + (R13/R14) 22.500 SCALING FACTOR Figure 2. Scaling Factor Window _______________________________________________________________________________________ 7 Evaluates: MAX16826 Scaling Factors The calculations for the LED string current, boost output voltage, and the read-back values are based on the scaling factors. You can change the scaling factor by selecting the Scaling Factor menu item under the Scaling Factors menu bar. In the pop-up window shown in Figure 2, enter the appropriate scaling factor. Evaluates: MAX16826 MAX16826 Evaluation Kit Detailed Description of Hardware The MAX16826 EV kit board provides a proven layout for evaluating the MAX16826 IC. This EV kit consists of a controller board and an LED driver board. The breakaway slots at the center of the EV kit make it easier for the user to break and separate the controller board from the LED driver board. This is done so that once the evaluation is complete with the included software, the driver board can easily be used in the target application environment with the target system microcontroller. To connect the power, ground, PWM, and the I2C interface signals of the boards, attach the ribbon cable to the P1 connector of the controller board and attach the other end of the ribbon cable to the P2 connector of the LED driver board. Controller Board The controller board acts as the bridge between the software in the PC and the actual LED driver board containing the MAX16826. In addition to the USB connectivity, it generates the four adjustable PWM DIM signals that control the brightness of the LEDs. The controller board communicates with the driver board through the I2C interface, and is able to read or change the values of the registers in the MAX16826. The user can use the MAX16826 evaluation kit software to control the controller board. See Table 1 to control the MAX16826 with a user-supplied PWM signal. LED Driver Board The LED driver board is able to drive up to four LED strings (7 LEDs/string). LED strings can be connected to the LED driver board through the P3 connector by using a ribbon cable. Connect all of the anode ends of 8 the LED strings to the P3-1 pin (which connects to the boost output) of the P3 connector. Then connect the cathode ends of the LED strings to the P3-2 to P3-5 pins (that connects to the drains of the sink FETs) of the P3 connector. User-Supplied I2C Interface To use the MAX16826 EV kit with a user-supplied I2C interface, install the shunts on pins 2-3 of JU4 and JU5. Connect SDA, SCL, and GND lines from the usersupplied I2C interface to the SDA, SCL, and PGND pads on the MAX16826 controller board. After the LED driver board has broken away from the controller board, the user may connect their supplied I2C, DIM, and power signals to the LED driver board through the P2 connector using a ribbon cable. See Table 4 for the pin description of the P2 connector. Table 4. Pin Description for P2 Connector PIN NUMBER P2-1 to P2-5 P2-6 P2-7 to P2-11 DESCRIPTION Connect to the VIN pin of the MAX16826 Not connected Connect to the ground P2-12 Connects to the SYNC/EN pin of the MAX16826 P2-13 Connects to the SDA pin of the MAX16826 P2-14 Connects to the SCL pin of the MAX16826 P2-15 Connects to the DIM4 pin of the MAX16826 P2-16 Connects to the DIM3 pin of the MAX16826 P2-17 Connects to the DIM2 pin of the MAX16826 P2-18 Connects to the DIM1 pin of the MAX16826 _______________________________________________________________________________________ MAX16826 Evaluation Kit Evaluates: MAX16826 Figure 3. MAX16826 EV Kit LED Driver Board Schematic _______________________________________________________________________________________ 9 Evaluates: MAX16826 MAX16826 Evaluation Kit Figure 4a. MAX16826 EV Kit Controller Board Schematic (Sheet 1 of 2) 10 ______________________________________________________________________________________ MAX16826 Evaluation Kit Evaluates: MAX16826 Figure 4b. MAX16826 EV Kit Controller Board Schematic (Sheet 2 of 2) ______________________________________________________________________________________ 11 Evaluates: MAX16826 MAX16826 Evaluation Kit Figure 5. MAX16826 EV Kit Component Placement Guide--Component Side 12 ______________________________________________________________________________________ MAX16826 Evaluation Kit Evaluates: MAX16826 Figure 6. MAX16826 EV Kit PCB Layout--Component Side ______________________________________________________________________________________ 13 Evaluates: MAX16826 MAX16826 Evaluation Kit Figure 7. MAX16826 EV Kit PCB Layout--Layer 2 14 ______________________________________________________________________________________ MAX16826 Evaluation Kit Evaluates: MAX16826 Figure 8. MAX16826 EV Kit PCB Layout--Layer 3 ______________________________________________________________________________________ 15 Evaluates: MAX16826 MAX16826 Evaluation Kit Figure 9. MAX16826 EV Kit PCB Layout--Solder Side Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 16 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2008 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX16826EVKIT+