PF5000 – PF5006 1 of 2 © 2006 Won-Top Electronics
Pb
PF5000 – PF5006
50A 1/2" PRESS-FIT DIODE
Features
! Diffused Junction
! Low Leakage A
! Low Cost Anode +
! High Surge Current Capability
! Typical IR less than 5.0µA
Mechanical Data
! Case: DO-21, Copper Case and Components C
Herm etic all y Sealed
! Terminals: Contact Areas Readily Solderable
! Polarity: Cathode to Case (Reverse Units Are F
Available Upon Request and Are Designated
By A “R” Suffix, i.e. PF5002R or PF5004R)
! Polarity: Red Color Equals Standard, D
Black Color Equals Reverse Polarity E
! Mounting Position: Any
! Lead Free: For RoHS / Lead Free Version, B
Add “-LF” Suffix to Part Number, See Page 2
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capaciti ve load, derate current by 20%.
Characteristic Symbol PF5000 PF5001 PF5002 PF5003 PF5004 PF5005 PF5006 Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 300 400 500 600 V
RMS Reverse Voltage VR(RMS) 35 70 140 210 280 350 420 V
Average Rectified Output Current @TC = 150°C IO50 A
Non-Repetiti ve P eak Forward Surge Current
8.3ms Si ngl e half sine-wave superimposed on
rated load (JEDE C Method) IFSM 500 A
Forward Voltage @IF = 50A VFM 1.0 V
Peak Reverse Current @TA = 25°C
At Rated DC Blocking Voltage @TA = 100°C IRM 5.0
500 µA
Typi cal Junction Capacitanc e (Note 1) Cj400 pF
Typical Thermal Resistance (Note 2) RJC 1.0 °C/W
Operating and Storage Temperature Range TJ, TSTG -65 to +175 °C
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
WTE
POWER SEMICONDUCTORS
DO-21
Dim Min Max
A15.77 15.97
B12.73 12.82
C1.25 1.31
D9.55 9.85
E5.70 5.90
F28.00 —
All Dimensions in mm
PF5000 – PF5006 2 of 2 © 2006 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
PF5000 DO-21 Press-Fit 100 Units/Box
PF5001 DO-21 Press-Fit 100 Units/Box
PF5002 DO-21 Press-Fit 100 Units/Box
PF5003 DO-21 Press-Fit 100 Units/Box
PF5004 DO-21 Press-Fit 100 Units/Box
PF5005 DO-21 Press-Fit 100 Units/Box
PF5006 DO-21 Press-Fit 100 Units/Box
1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. To or d er Lea d Fr ee ver s io n (wi t h Le ad Fre e fi n is h), add “ -L F ” s uf fix to part
number ab o ve. For ex am pl e, P F5 00 0-L F.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Tai wan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wont op.com
