42-629501 - Hypertac - Pdf.Support

ILLUMINATION

No. E352519

LUXEON 5050 is a multi-die, high power package that provides high

luminance from a single package to enable cost eective, single optic and

directional xture designs. LUXEON 5050 uses an industry standard 5050

surface mount package with the smallest round Light Emitting Surface

(LES). LUXEON 5050 comes in 70CRI, 80CRI and 90CRI with a wide range

of CCTs, and oers hot-color targeting to ensure that the LEDs are within

color target at application conditions of 85°C.

LUXEON 5050

High ecacy and lumens in a multi-die, high

power package, enabling low system costs

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Small LES (4.6mm) enables good optic design for great punch Downlights

Enables highest ecacy system design by driving at low current High Bay & Low Bay

Hot-color targeting ensures color is within ANSI bin at 85°C Lamps

Binned within 3-step and 5-step MacAdam ellipse, ensuring color uniformity Outdoor

Compatible with low cost and high ecacy drivers Spotlights

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Lumen Maintenance .................................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Optical Characteristics ...............................................................................4

Electrical and Thermal Characteristics..................................................................4

Absolute Maximum Ratings .......................................................................4

Characteristic Curves .............................................................................5

Spectral Power Distribution Characteristics .............................................................5

Light Output Characteristics ..........................................................................6

Forward Current Characteristics.......................................................................8

Radiation Pattern Characteristics ......................................................................9

Product Bin and Labeling Denitions ..............................................................10

Decoding Product Bin Labeling.......................................................................10

Luminous Flux Bins .................................................................................10

Color Bin Denitions ................................................................................11

Forward Voltage Bins ...............................................................................12

Mechanical Dimensions..........................................................................12

Reow Soldering Guidelines ......................................................................13

JEDEC Moisture Sensitivity ...........................................................................13

Solder Pad Design ..................................................................................14

Packaging Information...........................................................................14

Pocket Tape Dimensions ............................................................................14

Reel Dimensions ...................................................................................15

General Product Information

Product Test Conditions

LUXEON 5050 LEDs are tested with a 20ms monopulse of 160mA for LUXEON 5050 24V and 640mA for LUXEON 5050 6V at a

junction temperature, Tj, of 25°C. Forward voltage and luminous ux are binned at a Tj of 25°C, while color is hot targeted at a

Tj of 85°C.

Part Number Nomenclature

Part numbers for LUXEON 5050 follow the convention below:

L 1 5 0 – A A B B 5 0 C C 0 0 0 0 0

Where:

A A – designates nominal ANSI CCT (22=2200K, 27=2700K, 30=3000K, 35=3500K 40=4000K, 50=5000K,

57=5700K, 65=6500K)

B B – designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI)

C C – designates voltage (06=6V, 24=24V)

Therefore, the following part number is used for a LUXEON 5050, 3000K 80CRI, 24V:

L 1 5 0 – 3 0 8 0 5 0 2 4 0 0 0 0 0

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 5050 is

compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the

RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted

materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1. Product performance of LUXEON 5050 at test current, Tj=25°C.

VOLTAGE NOMINAL

CCT [1]

MINIMUM

CRI [2, 3]

LUMINOUS FLUX [2, 3] (lm)TYPICAL LUMINOUS

EFFICACY (lm/W)

TEST

CURRENT

(mA)

PART NUMBER

MINIMUM TYPICAL

24V

2200K 70 515 550 140 160 L150-2270502400000

2700K 70 535 600 153 160 L150-2770502400000

3000K 70 553 620 158 160 L150-3070502400000

3500K 70 600 635 162 160 L150-3570502400000

4000K 70 580 650 166 160 L150-4070502400000

5000K 70 580 650 166 160 L150-5070502400000

5700K 70 570 650 166 160 L150-5770502400000

6500K 70 570 650 166 160 L150-6570502400000

2200K 80 440 475 121 160 L150-2280502400000

2700K 80 500 560 143 160 L150-2780502400000

3000K 80 516 585 149 160 L150-3080502400000

3500K 80 527 595 152 160 L150-3580502400000

4000K 80 539 610 156 160 L150-4080502400000

5000K 80 539 610 156 160 L150-5080502400000

5700K 80 539 610 156 160 L150-5780502400000

6500K 80 539 610 156 160 L150-6580502400000

2700K 90 414 471 120 160 L150-2790502400000

3000K 90 428 486 124 160 L150-3090502400000

3500K 90 445 506 129 160 L150-3590502400000

4000K 90 456 526 134 160 L150-4090502400000

5000K 90 456 526 134 160 L150-5090502400000

5700K 90 456 526 134 160 L150-5790502400000

2200K 70 515 550 140 640 L150-2270500600000

2700K 70 535 600 153 640 L150-2770500600000

3000K 70 553 620 158 640 L150-3070500600000

3500K 70 600 635 162 640 L150-3570500600000

4000K 70 580 650 166 640 L150-4070500600000

5000K 70 580 650 166 640 L150-5070500600000

5700K 70 570 650 166 640 L150-5770500600000

6500K 70 570 650 166 640 L150-6570500600000

2200K 80 440 475 121 640 L150-2280500600000

2700K 80 500 560 143 640 L150-2780500600000

3000K 80 516 585 149 640 L150-3080500600000

3500K 80 527 595 152 640 L150-3580500600000

4000K 80 539 610 156 640 L150-4080500600000

5000K 80 539 610 156 640 L150-5080500600000

5700K 80 539 610 156 640 L150-5780500600000

6500K 80 539 610 156 640 L150-6580500600000

2700K 90 414 471 120 640 L150-2790500600000

3000K 90 428 486 124 640 L150-3090500600000

3500K 90 445 506 129 640 L150-3590500600000

4000K 90 456 526 134 640 L150-4090500600000

5000K 90 456 526 134 640 L150-5090500600000

5700K 90 456 526 134 640 L150-5790500600000

Notes for Table 1:

1. Correlated color temperature is hot targeted at Tj=85°C.

2. Luminous ux and CRI are based upon mounted package on highly reective surface at Tj=25°C. Typical CRI is approximately 2 points higher than the minimum CRI specied, but this

is not guaranteed.

3. Lumileds maintains a tolerance of ±2 on CRI and ±7% on luminous ux measurements.

Optical Characteristics

Table 2. Optical characteristics for LUXEON 5050 at test current, Tj=25°C.

PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2]

L150-xxxx50xx00000 138° 116°

Notes for Table 2:

1. Total angle at which 90% of total luminous ux is captured.

2. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3. Electrical and thermal characteristics for LUXEON 5050 at test current, Tj=25°C.

PART NUMBER

FORWARD VOLTAGE [1] (Vf)TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE [2] (mV/°C)

TYPICAL THERMAL

RESISTANCE—JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

L150-xxxx502400000 23.5 24.5 26.5 -12 2

L150-xxxx500600000 5.8 6.1 6.6 -3 2

Notes for Table 3:

1. Lumileds maintains a tolerance of ±1% on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON 5050.

PARAMETER MAXIMUM PERFORMANCE

DC Forward Current [1, 2] 240mA for 24V

800mA for 6V

Peak Pulsed Forward Current [1, 3] 300mA for 24V

1000mA for 6V

LED Junction Temperature [1] (DC & Pulse) 125°C

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2

Operating Case Temperature [1] 105°C

LED Storage Temperature -40°C to 105°C

Allowable Reow Cycles 3

Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. At 10% duty cycle with pulse width of 10ms.

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1a. Typical normalized power vs. wavelength for L150-xx7050xx00000 at test current, Tj=25°C.

Figure 1b. Typical normalized power vs. wavelength for L150-xx8050xx00000 at test current, Tj=25°C.

Light Output Characteristics

Figure 2. Typical normalized light output vs. junction temperature for L150-xxxx50xx00000 at test current.

Figure 1c. Typical normalized power vs. wavelength for L150-xx9050xx00000 at test current, Tj=25°C.

Figure 3b. Typical normalized light output vs. forward current for L150-xxxx500600000, Tj=25°C.

Figure 3a. Typical normalized light output vs. forward current for L150-xxxx502400000, Tj=25°C.

Forward Current Characteristics

Figure 4b. Typical forward current vs. forward voltage for L150-xxxx500600000, Tj=25°C.

Figure 4a. Typical forward current vs. forward voltage for L150-xxxx502400000, Tj=25°C.

Radiation Pattern Characteristics

Figure 5. Typical radiation pattern for L150-xxxx50xx00000 at test current, Tj=25°C.

Figure 6. Typical polar radiation pattern for L150-xxxx50xx00000 at test current, Tj=25°C.

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON 5050 LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C C

Where:

A – designates luminous ux bin (example: H=450 to 500 lumens, L=600 to 650 lumens)

B – designates color bin (example: (example: 3=3 SDCM, 5=5 SDCM parts)

C C – designates forward voltage bin (example: A1, A2, B1, B2)

Therefore, a LUXEON 5050 with a lumen range of 600 to 650, color bin of 3 and forward voltage range of 23.5 to 24.2V has the

following CAT code:

L 3 A 1

Luminous Flux Bins

Table 5 lists the standard luminous ux bins for LUXEON 5050 LEDs. Although several bins are outlined, product availability in a

particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ux bin denitions for LUXEON 5050, Tj=25°C.

BIN LUMINOUS FLUX [1] (lm)

MINIMUM MAXIMUM

G 400 450

H 450 500

J 500 550

K 550 600

L 600 650

M 650 700

N 700 750

Notes for Table 5:

1. Lumileds maintains a tolerance of ±7% on luminous ux measurements.

Color Bin Denitions

Table 6. 3- and 5-step MacAdam ellipse color bin denitions for LUXEON 5050 at test current, hot-color targeted at Tj=85°C.

NOMINAL CCT COLOR SPACE CENTER POINT [1]

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

2200K Single 3-step MacAdam ellipse (0.5018, 0.4153) 0.008625 0.003975 49.27°

2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70°

3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.22°

3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.00°

4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72°

5000K Single 3-step MacAdam ellipse (0.3447, 0.3558) 0.00822 0.00354 59.62°

5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00745 0.00320 59.09°

6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57°

2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70°

3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.22°

3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.00°

4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.72°

5000K Single 5-step MacAdam ellipse (0.3447, 0.3558) 0.01370 0.00590 59.62°

5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09°

6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57°

Notes for Table 6:

1. Lumileds maintains a tolerance of ±0.01 on x and y coordinates in the CIE 1931 color space.

Figure 7. 3- and 5-step MacAdam ellipse illustration for hot-color targeting expected at 85°C.

Forward Voltage Bins

Table 7. Forward voltage bin denitions for LUXEON 5050, Tj=25°C.

PART NUMBER BIN FORWARD VOLTAGE [1] (Vf)

MINIMUM MAXIMUM

L150-xxxx502400000

A1 23.5 24.2

A2 24.2 25.0

B1 25.0 25.8

B2 25.8 26.5

L150-xxxx500600000

A1 5.8 6.0

A2 6.0 6.2

B1 6.2 6.4

B2 6.4 6.6

Notes for Table 7:

1. Lumileds maintains a tolerance of ±1% on forward voltage measurements.

Mechanical Dimensions

Notes for Figure 8:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 8. Mechanical dimensions for LUXEON 5050.

Reow Soldering Guidelines

Table 8. Reow prole characteristics for LUXEON 5050.

PROFILE FEATURE LEAD-FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C

Preheat Time (tsmin to tsmax) 60 to 180 seconds

Ramp-Up Rate (TL to Tp)3°C / second maximum

Liquidus Temperature (TL) 217°C

Time Maintained Above Temperature TL (tL) 60 to 150 seconds

Peak / Classication Temperature (Tp) 260°C

Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds

Ramp-Down Rate (Tp to TL)6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 9. Moisture sensitivity levels for LUXEON 5050.

LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

3 168 Hours ≤30°C / 60% RH 192 Hours +5 / -0 30°C / 60% RH

Time 25ºC to Peak

JEDEC J-STD-020D

Critical Zone

TL to Tp

Ramp-up

Ramp-down

Temperature

Time

Preheat Area

Tsmax

Tsmin

Figure 9. Visualization of the acceptable reow temperature prole as specied in Table 8.

Solder Pad Design

Notes for Figure 10:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 10. Recommended PCB solder pad layout for LUXEON 5050.

Packaging Information

Pocket Tape Dimensions

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 11. Pocket tape dimensions for LUXEON 5050.

Reel Dimensions

Notes for Figure 12:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 12. Reel dimensions for LUXEON 5050.

00.3

10 3

100.3

Back View Front View

Front

Back

DS174 LUXEON 5050

Product Datasheet 20180829

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aliates

warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding

B.V. and its aliates reserve the right to make changes without notice. You as user agree to this disclaimer and

user agreement with the download or use of the provided materials, information and data. A listing of Lumileds

product/patent coverage may be accessed at lumileds.com/patents.

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry rsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver dierentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.