LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Downsized snap-ins, 105C
CAT. No. E1001E
@Downsized from current downsized snap-ins KMH series
@Endurance with ripple current : 105C 2000 hours
@Non solvent-proof type
@Pb-free design
?SPECIFICATIONS
(at 20C, 120Hz)
(at 20C after 5 minutes)
(at 20C, 120Hz)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Items
-
25 to +105C
160 to 450Vdc
P20% (M)
I[3 CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
Rated voltage (Vdc)
tanE (Max.)
Rated voltage (Vdc)
Z(
-
25C)/Z(+20C)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 2000 hours at 105C.
Capacitance change [P20% of the initial value
D.F. (tanE)[200% of the initial specified value
Leakage current [The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C
without voltage applied.
Capacitance change [P15% of the initial value
D.F. (tanE)[150% of the initial specified value
Leakage current [The initial specified value
Characteristics
160 to 250V
0.15
160 to 250V
4
315 to 400V
0.15
315 to 400V
8
420 & 450V
0.20
420 & 450V
8
?DIMENSIONS [mm]
@Terminal Code : VS (F22 to F35) : Standard
4.0P0.5
FD+1max.
Vent
Sleeve (PET)
LP2
Negative mark PC board pin-out
10
2
-
F2
@Terminal Code : LI (F35)
Sleeve (PET)
Vent 4.5P1
LP2
FD+1max.
Negative mark PC board pin-out
2
-
1.2B6
5P0.5
14.2P1
4.2P0.5
?PART NUMBERING SYSTEM
downsized
KMQ
KMH
No plastic disk is the standard design.
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 68MF:680,3300MF:332)
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 160V:161,315V:3B1,450V:451)
Series code
Category
E KMQ A A A V S N A A A A A A SM
13426789105121311 16 17 181514
Please refer to "A guide to global code (snap-in type)"
(1/3)
ALUMINUM ELECTROLYTIC CAPACITORS