© Semiconductor Components Industries, LLC, 2011
July, 2011 − Rev. 24
1Publication Order Number:
NCP302/D
NCP302, NCP303
Voltage Detector Series
with Programmable Delay
The NCP302 and NCP303 series are second generation ultra−low
current voltage detectors that contain a programmable time delay
generator. These devices are specifically designed for use as reset
controllers in portable microprocessor based systems where extended
battery life is paramount.
Each series features a highly accurate undervoltage detector with
hysteresis and an externally programmable time delay generator. This
combination of features prevents erratic system reset operation.
The NCP302 series consists of complementary output devices that
are available with either an active high or active low reset. The
NCP303 series has an open drain N−Channel output with an active low
reset output.
Features
•Quiescent Current of 0.5 mA Typical
•High Accuracy Undervoltage Threshold of 2.0%
•Externally Programmable Time Delay Generator
•Wide Operating Voltage Range of 0.8 V to 10 V
•Complementary or Open Drain Output
•Active Low or Active High Reset
•Specified Over the −40°C to +125°C Temperature Range
(Except for Voltage Options from 0.9 to 1.1 V)
•Pb−Free Packages are Available
Typical Applications
•Microprocessor Reset Controller
•Low Battery Detection
•Power Fail Indicator
•Battery Backup Detection
Figure 1. Representative Block Diagrams
This device contains 28 active transistors.
NCP303LSNxxT1
Open Drain Output Configuration
NCP302xSNxxT1
Complementary Output Configuration
* Inverter for active low devices.
* Buffer for active high devices.
Vref
2 Input
1
Reset
Output
3 GND 5C
D
RD
*Vref
2 Input
3 GND 5C
D
RD
1 Reset Output
See detailed ordering and shipping information in the ordering
information section on page 22 of this data sheet.
ORDERING INFORMATION
TSOP−5/
SOT23−5
CASE 483
PIN CONNECTIONS
1
3N.C.
Reset
Output
2
Input
Ground 4
CD
5
(Top View)
http://onsemi.com
1
5
xxx AYWG
G
MARKING
DIAGRAM
xxx = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
G= Pb−Free Package
1
5
(Note: Microdot may be in either location)
NCP302, NCP303
http://onsemi.com
2
MAXIMUM RATINGS
Rating Symbol Value Unit
Input Power Supply Voltage (Pin 2) Vin 12 V
Delay Capacitor Pin Voltage (Pin 5) VCD −0.3 to Vin + 0.3 V
Output Voltage (Pin 1)
Complementary, NCP302
N−Channel Open Drain, NCP303
VOUT
−0.3 to Vin + 0.3
−0.3 to 12
V
Output Current (Pin 1) (Note 2) IOUT 70 mA
Thermal Resistance Junction−to−Air RqJA 250 °C/W
Maximum Junction Temperature All NCP Options
All NCV Options
TJ+125
+150
°C
Operating Ambient Temperature Range
All Voltage Options: 0.9 V to 1.1 V
All Voltage Options: 1.2 V to 4.9 V
TA
TA
−40 to +85
−40 to +125
°C
°C
Storage Temperature Range Tstg −55 to +150 °C
Moisture Sensitivity Level MSL 1
Latchup Performance (Note 3)
Positive
Negative
ILATCHUP 200
200
mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per MIL−STD−883, Method 3015.
Machine Model Method 200 V.
2. The maximum package power dissipation limit must not be exceeded.
PD+
TJ(max) *TA
RqJA
3. Maximum ratings per JEDEC standard JESD78.
NCP302, NCP303
http://onsemi.com
3
ELECTRICAL CHARACTERISTICS (For all values TA = −40°C to +125°C, unless otherwise noted.)
Characteristic Symbol Min Typ Max Unit
NCP302/3 − 0.9 (TA = 255C for voltage options from 0.9 to 1.1 V)
Detector Threshold (Pin 2, Vin Decreasing) VDET−0.882 0.900 0.918 V
Detector Threshold Hysteresis (Pin 2, Vin Increasing) VHYS 0.027 0.045 0.063 V
Supply Current (Pin 2)
(Vin = 0.8 V)
(Vin = 2.9 V)
Iin
−
−
0.20
0.45
0.6
1.2
mA
Maximum Operating Voltage (Pin 2) Vin(max) − − 10 V
Minimum Operating Voltage (Pin 2)
(TA= −40°C to 85°C)
Vin(min) −
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 0.85V)
0.01
0.05
0.05
0.50
−
−
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V) 1.0 6.0 −
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 1.5 V) 1.05 2.5 −
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 0.8 V)
0.011
0.014
0.04
0.08
−
−
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 0.99 V)
VTCD 0.50 0.67 0.84
V
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 0.85 V, VCD = 0.5V)
ICD 2.0
10
120
300
−
−
mA
Delay Pullup Resistance (Pin 5) RD0.5 1.0 2.0 MW
NCP302/3 − 1.8
Detector Threshold (Pin 2, Vin Decreasing) (TA= 25°C)
(TA= −40°C to 125°C)
VDET−1.764
1.746
1.800
−
1.836
1.854
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing) VHYS 0.054 0.090 0.126 V
Supply Current (Pin 2)
(Vin = 1.7 V)
(Vin = 3.8 V)
Iin
−
−
0.23
0.48
0.7
1.3
mA
Maximum Operating Voltage (Pin 2) Vin(max) − − 10 V
Minimum Operating Voltage (Pin 2) (TA= 25°C)
(TA= −40°C to 125°C)
Vin(min) −
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
0.01
1.0
0.05
2.0
−
−
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V) 1.0 6.0 −
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V) 6.3 11 −
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
0.011
0.525
0.04
0.6
−
−
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 1.98 V)
VTCD 0.99 1.34 1.68
V
NCP302, NCP303
http://onsemi.com
4
ELECTRICAL CHARACTERISTICS (continued) (For all values TA = −40°C to +125°C, unless otherwise noted.)
Characteristic UnitMaxTypMinSymbol
NCP302/3 − 1.8
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD 2.0
200
120
1600
−
−
mA
Delay Pullup Resistance (Pin 5) RD0.5 1.0 2.0 MW
NCP302/3 − 2.0
Detector Threshold (Pin 2, Vin Decreasing) (TA= 25°C)
(TA= −40°C to 125°C)
VDET−1.96
1.94
2.00
−
2.04
2.06
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing) VHYS 0.06 0.10 0.14 V
Supply Current (Pin 2)
(Vin = 1.9 V)
(Vin = 4.0 V)
Iin
−
−
0.23
0.48
0.8
1.3
mA
Maximum Operating Voltage (Pin 2) Vin(max) − − 10 V
Minimum Operating Voltage (Pin 2) (TA= 25°C)
(TA= −40°C to 125°C)
Vin(min) −
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
0.01
1.0
0.14
3.5
−
−
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V) 1.0 9.7 −
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V) 6.3 11 −
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
0.011
0.525
0.04
0.6
−
−
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 2.2 V)
VTCD 1.10 1.49 1.87
V
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD 2.0
200
250
3600
−
−
mA
Delay Pullup Resistance (Pin 5) RD0.5 1.0 2.0 MW
NCP302/3− 2.7
Detector Threshold (Pin 2, Vin Decreasing) (TA= 25°C)
(TA= −40°C to 125°C)
VDET−2.646
2.619
2.700
−
2.754
2.781
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing) VHYS 0.081 0.135 0.189 V
Supply Current (Pin 2)
(Vin = 2.6 V)
(Vin = 4.7 V)
Iin
−
−
0.25
0.50
0.8
1.3
mA
Maximum Operating Voltage (Pin 2) Vin(max) − − 10 V
Minimum Operating Voltage (Pin 2) (TA= 25°C)
(TA= −40°C to 125°C)
Vin(min) −
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
0.01
1.0
0.14
3.5
−
−
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V) 1.0 9.7 −
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V) 6.3 11 −
NCP302, NCP303
http://onsemi.com
5
ELECTRICAL CHARACTERISTICS (continued) (For all values TA = −40°C to +125°C, unless otherwise noted.)
Characteristic UnitMaxTypMinSymbol
NCP302/3− 2.7
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
0.011
0.525
0.04
0.6
−
−
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 2.97 V)
VTCD 1.49 2.01 2.53
V
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD 2.0
200
250
3600
−
−
mA
Delay Pullup Resistance (Pin 5) RD0.5 1.0 2.0 MW
NCP302/3 − 3.0
Detector Threshold (Pin 2, Vin Decreasing) (TA= 25°C)
(TA= −40°C to 125°C)
VDET−2.94
2.91
3.00
−
3.06
3.09
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing) VHYS 0.09 0.15 0.21 V
Supply Current (Pin 2)
(Vin = 2.87 V)
(Vin = 5.0 V)
Iin
−
−
0.25
0.50
0.9
1.3
mA
Maximum Operating Voltage (Pin 2) Vin(max) − − 10 V
Minimum Operating Voltage (Pin 2) (TA= 25°C)
(TA= −40°C to 125°C)
Vin(min) −
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
0.01
1.0
0.14
3.5
−
−
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V) 1.0 9.7 −
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V) 6.3 11 −
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
0.011
0.525
0.04
0.6
−
−
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 3.3 V)
VTCD 1.65 2.23 2.81
V
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD 2.0
200
250
3600
−
−
mA
Delay Pullup Resistance (Pin 5) RD0.5 1.0 2.0 MW
NCP302/3 − 4.5
Detector Threshold (Pin 2, Vin Decreasing) (TA= 25°C)
(TA= −40°C to 125°C)
VDET−4.410
4.365
4.500
−
4.590
4.635
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing) VHYS 0.135 0.225 0.315 V
Supply Current (Pin 2)
(Vin = 4.34 V)
(Vin = 6.5 V)
Iin
−
−
0.33
0.52
1.0
1.4
mA
Maximum Operating Voltage (Pin 2) Vin(max) − − 10 V
Minimum Operating Voltage (Pin 2) (TA= 25°C)
(TA= −40°C to 125°C)
Vin(min) −
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
0.01
1.0
0.05
2.0
−
−
NCP302, NCP303
http://onsemi.com
6
ELECTRICAL CHARACTERISTICS (continued) (For all values TA = −40°C to +125°C, unless otherwise noted.)
Characteristic UnitMaxTypMinSymbol
NCP302/3 − 4.5
Pch Source Current, NCP302
(VOUT = 5.9V, Vin = 8.0V) 1.5 10.5 −
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V) 6.3 11 −
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
0.011
0.525
0.04
0.6
−
−
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 4.95 V)
VTCD 2.25 3.04 3.83
V
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD 2.0
200
120
1600
−
−
mA
Delay Pullup Resistance (Pin 5) RD0.5 1.0 2.0 MW
NCP302/3 − 4.7
Detector Threshold (Pin 2, Vin Decreasing) (TA= 25°C)
(TA= −40°C to 125°C)
VDET−4.606
4.559
4.700
−
4.794
4.841
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing) VHYS 0.141 0.235 0.329 V
Supply Current (Pin 2)
(Vin = 4.54 V)
(Vin = 6.7 V)
Iin
−
−
0.34
0.53
1.0
1.4
mA
Maximum Operating Voltage (Pin 2) Vin(max) − − 10 V
Minimum Operating Voltage (Pin 2) (TA= 25°C)
(TA= −40°C to 125°C)
Vin(min) −
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
0.01
1.0
0.05
2.0
−
−
Pch Source Current, NCP302
(VOUT = 5.9V, Vin = 8.0V) 1.5 10.5 −
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices) IOUT mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V) 6.3 11 −
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
0.011
0.525
0.04
0.6
−
−
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 5.17 V)
VTCD 2.59 3.49 4.40
V
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD 2.0
200
120
1600
−
−
mA
Delay Pullup Resistance (Pin 5) RD0.5 1.0 2.0 MW
NCP302, NCP303
http://onsemi.com
7
0.7 V
GND
5.0 V
2.5 V
GND
VDET+ + 2.0 V
NCP303LNCP302L
tD2
Input Voltage,
Pin 2
0.7 V
GND
GND
VDET+ + 2.0 V
tD2
VDET+ + 2.0 V
VDET+ + 2.0 V
2
Reset Output
Voltage, Pin 1
NCP302 and NCP303 series are measured with a 10 pF capacitive load. NCP303 has an additional 470 k pullup resistor
connected from the reset output to +5.0 V. The reset output voltage waveforms are shown for the active low ‘L’ devices. Output
time delay tD1 and tD2 are dependent upon the delay capacitance. Refer to Figures 30, 31, and 32. The upper detector
threshold, VDET+ is the sum of the lower detector threshold, VDET− plus the input hysteresis, VHYS.
Figure 2. Measurement Conditions for tD1 and tD2
tD1 tD1
NCP302, NCP303
http://onsemi.com
8
Table 1. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
NCP302 Series Detector Threshold
Detector Threshold
Hysteresis
Supply Current Nch Sink Current Pch
Source
Current
Vin Low Vin High Vin Low Vin High
VDET− (V) (Note 4) VHYS (V)
Iin (mA)
(Note 5)
Iin (mA)
(Note 6)
IOUT (mA)
(Note 7)
IOUT (mA)
(Note 8)
IOUT(mA)
(Note 9)
Part Number Min Typ Max Min Typ Max Typ Typ Typ Typ Typ
NCP302LSN09T1 0.882 0.9 0.918 0.027 0.045 0.063 0.20 0.45 0.05 0.5 2.0
NCP302LSN15T1 1.470 1.5 1.530 0.045 0.075 0.105
NCP302LSN18T1 1.764 1.8 1.836 0.054 0.090 0.126 0.23 0.48
NCP302LSN20T1 1.960 2.0 2.040 0.060 0.100 0.140
NCP302LSN27T1 2.646 2.7 2.754 0.081 0.135 0.189 0.25 0.50
NCP302LSN30T1, 2.940 3.0 3.060 0.090 0.150 0.210
NCV302LSN30T1, 2.940 3.0 3.060 0.090 0.150 0.210
NCP302LSN33T1 3.234 3.3 3.366 0.099 0.165 0.231
NCP302LSN38T1 3.724 3.8 3.876 0.114 0.190 0.266
NCP302LSN40T1 3.920 4.0 4.080 0.120 0.200 0.280 3.0
NCP302LSN43T1 4.214 4.3 4.386 0.129 0.215 0.301
NCP302LSN45T1 4.410 4.5 4.590 0.135 0.225 0.315 0.33 0.52
NCP302LSN47T1 4.606 4.7 4.794 0.141 0.235 0.329 0.34 0.53
4. Values shown apply at +25°C only. For voltage options greater than 1.1 V, VDET− limits over operating temperature range (−40°C to +125°C)
are VNOM ±3%. For voltage options < 1.2 V, VDET− is guaranteed only at +25°C.
5. Condition 1: 0.9 — 2.9 V, Vin = VDET− − 0.10 V; 3.0 — 3.9 V, Vin = VDET− − 0.13 V; 4.0 — 4.9 V, Vin = VDET− − 0.16 V
6. Condition 2: 0.9 — 4.9 V, Vin = VDET− + 2.0 V
7. Condition 3: 0.9 — 4.9 V, Vin = 0.7 V, VOUT = 0.05 V, Active Low ‘L’ Suffix Devices
8. Condition 4: 0.9 — 1.0 V, Vin = 0.85 V, VOUT = 0.5 V; 1.1 — 1.5 V, Vin = 1.0 V, VOUT = 0.5 V; 1.6 — 4.9 V, Vin = 1.5 V, VOUT = 0.5 V,
Condition 4: Active Low ‘L’ Suffix Devices
9. Condition 5: 0.9 — 3.9 V, Vin = 4.5 V, VOUT = 2.4 V; 4.0 — 4.9 V, Vin = 8.0 V, VOUT = 5.9 V, Active Low ‘L’ Suffix Devices
Table 2. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
NCP302 Series Detector Threshold
Detector Threshold
Hysteresis
Supply Current Nch Sink
Current
Pch Source Current
Vin Low Vin High Vin Low Vin High
VDET− (V) (Note 10) VHYS (V)
Iin (mA)
(Note 11)
Iin (mA)
(Note 12)
IOUT (mA)
(Note 13)
IOUT (mA)
(Note 14)
IOUT (mA)
(Note 15)
Part Number Min Typ Max Min Typ Max Typ Typ Typ Typ Typ
NCP302HSN09T1 0.882 0.9 0.918 0.027 0.045 0.063 0.20 0.45 2.5 0.04 0.08
NCP302HSN18T1 1.764 1.8 1.836 0.054 0.090 0.126 0.23 0.48
NCP302HSN27T1 2.646 2.7 2.754 0.081 0.135 0.189 0.25 0.50
NCP302HSN30T1 2.940 3.0 3.060 0.090 0.150 0.210
NCP302HSN40T1 3.920 4.0 4.080 0.120 0.200 0.280
NCP302HSN45T1 4.410 4.5 4.590 0.135 0.225 0.315 0.33 0.52
10.Values shown apply at +25°C only. For voltage options greater than 1.1 V, VDET− limits over operating temperature range (−40°C to +125°C)
are VNOM ±3%. For voltage options < 1.2 V, VDET− is guaranteed only at +25°C.
11. Condition 1: 0.9 — 2.9 V, Vin = VDET− − 0.10 V; 3.0 — 3.9 V, Vin = VDET− − 0.13 V; 4.0 — 4.9 V, Vin = VDET− − 0.16 V
12.Condition 2: 0.9 — 4.9 V, Vin = VDET− + 2.0 V
13.Condition 3: 0.9 — 1.4 V, Vin = 1.5 V, VOUT = 0.5 V; 1.5 — 4.9 V, Vin = 5.0 V, VOUT = 0.5 V, Active High ‘H’ Suffix Devices
14.Condition 4: 0.9 — 4.9 V, Vin = 0.7 V, VOUT = 0.4 V, Active High ‘H’ Suffix Devices
15.Condition 5: 0.9 — 1.0 V, Vin = 0.8 V, VOUT = GND; 1.1 — 1.5 V, Vin = 1.0 V, VOUT = GND; 1.6 — 4.9 V, Vin = 1.5 V, VOUT = GND,
Active High ‘H’ Suffix Devices
NCP302, NCP303
http://onsemi.com
9
Table 3. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
NCP303 Series Detector Threshold
Detector Threshold
Hysteresis
Supply Current Nch Sink Current
Vin Low Vin High Vin Low Vin High
VDET− (V) (Note 16) VHYS (V)
Iin (mA)
(Note 17)
Iin (mA)
(Note 18)
IOUT (mA)
(Note 19)
IOUT (mA)
(Note 20)
Part Number Min Typ Max Min Typ Max Typ Typ Typ Typ
NCP303LSN09T1 0.882 0.9 0.918 0.027 0.045 0.063 0.20 0.45 0.05 0.5
NCP303LSN10T1 0.980 1.0 1.020 0.030 0.050 0.070
NCP303LSN11T1 1.078 1.1 1.122 0.033 0.055 0.077 1.0
NCP303LSN13T1 1.274 1.3 1.326 0.039 0.065 0.091
NCP303LSN14T1 1.372 1.4 1.428 0.042 0.070 0.098
NCP303LSN15T1 1.470 1.5 1.530 0.045 0.075 0.105
NCP303LSN16T1 1.568 1.6 1.632 0.048 0.080 0.112 2.0
NCP303LSN17T1 1.666 1.7 1.734 0.051 0.085 0.119
NCP303LSN18T1 1.764 1.8 1.836 0.054 0.090 0.126 0.23 0.48
NCP303LSN20T1 1.960 2.0 2.040 0.060 0.100 0.140
NCP303LSN22T1 2.156 2.2 2.244 0.066 0.110 0.154
NCP303LSN23T1 2.254 2.3 2.346 0.069 0.115 0.161
NCP303LSN24T1 2.352 2.4 2.448 0.072 0.120 0.168
NCP303LSN25T1 2.450 2.5 2.550 0.075 0.125 0.175
NCP303LSN26T1 2.548 2.6 2.652 0.078 0.130 0.182
NCP303LSN27T1 2.646 2.7 2.754 0.081 0.135 0.189 0.25 0.50
NCP303LSN28T1 2.744 2.8 2.856 0.084 0.140 0.196
NCP303LSN29T1 2.842 2.9 2.958 0.087 0.145 0.203
NCP303LSN30T1 2.940 3.0 3.060 0.090 0.150 0.210
NCP303LSN31T1 3.038 3.1 3.162 0.093 0.155 0.217
NCP303LSN32T1 3.136 3.2 3.264 0.096 0.160 0.224
NCP303LSN33T1 3.234 3.3 3.366 0.099 0.165 0.231
NCP303LSN34T1 3.332 3.4 3.468 0.102 0.170 0.238
NCP303LSN36T1 3.528 3.6 3.672 0.108 0.180 0.252
NCP303LSN38T1 3.724 3.8 3.876 0.114 0.190 0.266
NCP303LSN40T1 3.920 4.0 4.080 0.120 0.200 0.280
NCP303LSN42T1 4.116 4.2 4.284 0.126 0.210 0.294
NCP303LSN44T1 4.312 4.4 4.488 0.132 0.220 0.308
NCP303LSN45T1 4.410 4.5 4.590 0.135 0.225 0.315 0.33 0.52
NCP303LSN46T1 4.508 4.6 4.692 0.138 0.230 0.322
NCP303LSN47T1 4.606 4.7 4.794 0.141 0.235 0.329 0.34 0.53
NCP303LSN49T1 4.802 4.9 4.998 0.147 0.245 0.343
16.Values shown apply at +25°C only. For voltage options greater than 1.1 V, VDET− limits over operating temperature range (−40°C to +125°C)
are VNOM ±3%. For voltage options < 1.2 V, VDET− is guaranteed only at +25°C.
17.Condition 1: 0.9 — 2.9 V, Vin = VDET− − 0.10 V; 3.0 — 3.9 V, Vin = VDET− − 0.13 V; 4.0 — 4.9 V, Vin = VDET− − 0.16 V
18.Condition 2: 0.9 — 4.9 V, Vin = VDET− + 2.0 V
19.Condition 3: 0.9 — 4.9 V, Vin = 0.7 V, VOUT = 0.05 V, Active Low ‘L’ Suffix Devices
20.Condition 4: 0.9 — 1.0 V, Vin = 0.85 V, VOUT = 0.5 V; 1.1 — 1.5 V, Vin = 1.0 V, VOUT = 0.5 V; 1.6 — 4.9 V, Vin = 1.5 V, VOUT = 0.5 V,
Condition 4: Active Low ‘L’ Suffix Devices
NCP302, NCP303
http://onsemi.com
10
Figure 3. NCP302/3 Series 0.9 V
Input Current vs. Input Voltage
Figure 4. NCP302/3 Series 2.7 V
Input Current vs. Input Voltage
Figure 5. NCP302/3 Series 4.5 V
Input Current vs. Input Voltage
Figure 6. NCP302/3 Series 0.9 V
Detector Threshold Voltage vs. Temperature
Figure 7. NCP302/3 Series 2.7 V
Detector Threshold Voltage vs. Temperature
Figure 8. NCP302/3 Series 4.5 V
Detector Threshold Voltage vs. Temperature
Iin, INPUT CURRENT (mA)
Vin, INPUT VOLTAGE (V)
TA = 25°C
0
0.1
0.2
0.3
0.4
0.5
0.6
0 2.0 4.0 6.0 8.0 12
−50
TA, AMBIENT TEMPERATURE (°C)
1.00
0.95
0.85
−25 025 50 75 100
0.90
0.80
VDET
, DETECTOR THRESHOLD VOLTAGE (V)
VDET+
VDET−
VDET
, DETECTOR THRESHOLD VOLTAGE (V)
2.90
2.80
2.70
2.60
−50 −25 025 50 75 125
TA, AMBIENT TEMPERATURE (°C)
2.65
2.75
2.85
VDET+
VDET−
Iin, INPUT CURRENT (mA)
TA = 25°C
02.0 6.0 8.0 12
2.0
1.5
1.0
0.5
0
Vin, INPUT VOLTAGE (V)
4.0
2.5
10.5
10
100
Iin, INPUT CURRENT (mA)
TA = 25°C
0 2.0 1210
2.0
1.5
1.0
0.5
0
Vin, INPUT VOLTAGE (V)
8.0
2.5
6.0
17.2
4.0
VDET
, DETECTOR THRESHOLD VOLTAGE (V)
−50
4.9
TA, AMBIENT TEMPERATURE (°C)
4.8
4.7
4.6
4.4
−25 025 50 75 12
5
4.5
4.3
VDET+
VDET−
100
0.7
0.8
0.9
1.0
10
NCP302, NCP303
http://onsemi.com
11
Figure 9. NCP302L/3L Series 0.9 V
Reset Output Voltage vs. Input Voltage
Figure 10. NCP302L/3L Series 2.7 V
Reset Output Voltage vs. Input Voltage
Figure 11. NCP302L/3L Series 4.5 V
Reset Output Voltage vs. Input Voltage
Figure 12. NCP302H/3L Series 0.9 V
Reset Output Sink Current vs. Input Voltage
Figure 13. NCP302H/3L Series 2.7 V
Reset Output Sink Current vs. Input Voltage
Figure 14. NCP302H/3L Series 4.5 V
Reset Output Sink Current vs. Input Voltage
Vin, INPUT VOLTAGE (V)
00.2 0.4 0.6 0.8
1.0
0.8
0.6
0.4
0.2
0
1.0
VOUT
, OUTPUT VOLTAGE (V)
IOUT
, OUTPUT SINK CURRENT (mA)
Vin, INPUT VOLTAGE (V)
1.2
0.8
0.4
0
0.2
0.6
1.0
1.6
00.2 0.4 0.6 0.8 1.0
TA = 25°C
TA = −40°C
TA = 85°C
1.4
VOUT = 0.5 V
IOUT
, OUTPUT SINK CURRENT (mA)
Vin, INPUT VOLTAGE (V)
0
10
6.0
2.0
0.5 1.0 1.5 2.0 2.5 3.0
4.0
0
8.0
TA = 25°C
TA = −40°C
TA = 125°C
VOUT = 0.5 V
12
VOUT
, OUTPUT VOLTAGE (V)
01.0 1.5 2.0 2.5
3.5
2.0
1.5
1.0
0.5
0
3.5
Vin, INPUT VOLTAGE (V)
0.5
2.5
TA = −40°C (303L only)
TA = 125°C (303L only)
TA = 25°C (303L only)
3.0
3.0
VOUT
, OUTPUT VOLTAGE (V)
01.0 2.0 3.0 4.0
5.0
4.0
3.0
2.0
1.0
0
5.0
6.0
6.0
Vin, INPUT VOLTAGE (V)
TA = −40°C (303L only)
TA = 25°C (303L only)
IOUT
, OUTPUT SINK CURRENT (mA)
Vin, INPUT VOLTAGE (V)
01.0 2.0 3.0 4.0 5.0
20
5.0
0
10 TA = 25°C
TA = −40°C
TA = 125°C
VOUT = 0.5 V
15
TA = −40°C (303L only)
TA = 25°C (303L only)
NCP302, NCP303
http://onsemi.com
12
Figure 15. NCP302L Series 0.9 V
Reset Output Source Current vs. Input Voltage
Figure 16. NCP302L Series 2.7 V
Reset Output Source Current vs. Input Voltage
Figure 17. NCP302L Series 4.5 V
Reset Output Source Current vs. Input Voltage
Figure 18. NCP302H/3L Series 0.9 V
Reset Output Sink Current vs. Output Voltage
Figure 19. NCP302H/3L Series 2.7 V
Reset Output Sink Current vs. Output Voltage
Figure 20. NCP302H/3L Series 4.5 V
Reset Output Sink Current vs. Output Voltage
20
5.0
0
02.0 4.0 6.0 8.0 10
Vin, INPUT VOLTAGE (V)
10
15
VOUT = Vin −2.1 V
Vin −1.5 V
Vin −1.0 V
Vin −0.5 V
TA = 25°C
IOUT
, OUTPUT SOURCE CURRENT (mA)
IOUT
, OUTPUT SINK CURRENT (mA)
0
VOUT
, OUTPUT VOLTAGE (V)
0.2 0.4 0.6 0.8 1.
0
1.5
0.5
0
1.0 Vin = 0.85 V
TA = 25°C
Vin = 0.7 V
IOUT
, OUTPUT SINK CURRENT (mA)
15
10
5.0
0
00.5 1.0 1.5 2.0 2.5
VOUT
, OUTPUT VOLTAGE (V)
Vin = 2.5 V
Vin = 2.0 V
Vin = 1.5 V
TA = 25°C
IOUT
, OUTPUT SOURCE CURRENT (mA)
15
0
02.0 4.0 6.0 8.0 10
Vin, INPUT VOLTAGE (V)
5.0
10
20
VOUT = Vin −2.1 V
Vin −1.5 V
Vin −1.0 V
Vin −0.5 V
TA = 25°C
IOUT
, OUTPUT SOURCE CURRENT (mA)
15
0
02.0 4.0 6.0 8.0 10
Vin, INPUT VOLTAGE (V)
5.0
10
20
VOUT = Vin −2.1 V
TA = 25°C
Vin −1.5 V
Vin −1.0 V
Vin −0.5 V
0
35
25
15
5.0
1.0 2.0 3.0
10
0
4.0
20
30
VOUT
, OUTPUT VOLTAGE (V)
TA = 25°C
Vin = 4.0 V
Vin = 3.5 V
Vin = 3.0 V
Vin = 2.5 V
Vin = 2.0 V
Vin = 1.5 V
IOUT
, OUTPUT SINK CURRENT (mA)
NCP302, NCP303
http://onsemi.com
13
Figure 21. NCP302/3 Series 0.9 V
CD Delay Pin Sink Current vs. Input Voltage
Figure 22. NCP302/3 Series 2.7 V
CD Delay Pin Sink Current vs. Input Voltage
Figure 23. NCP302/3 Series 4.5 V
CD Delay Pin Sink Current vs. Input Voltage
Figure 24. NCP302/3 Series 0.9 V
CD Delay Pin Sink Current vs. Voltage
Figure 25. NCP302/3 Series 2.7 V
CD Delay Pin Sink Current vs. Voltage
Figure 26. NCP302/3 Series 4.5 V
CD Delay Pin Sink Current vs. Voltage
TA = 25°C
Vin, INPUT VOLTAGE (V)
1.2
0.8
0.4
0
0.2
0.6
1.0
1.4
00.2 0.4 0.6 0.8 1.0
TA = −40°C
TA = 85°C
ICD, CD DELAY PIN SINK CURRENT (mA)
VCD = 0.5 V
ICD, CD DELAY PIN SINK CURRENT (mA)
TA = 25°C
Vin, INPUT VOLTAGE (V)
0
10
6.0
2.0
0.5 1.0 1.5 2.0 2.5 3.0
4.0
0
8.0
TA = −40°C
TA = 125°C
VCD = 0.5 V
ICD, CD DELAY PIN SINK CURRENT (mA)
TA = 25°C
Vin, INPUT VOLTAGE (V)
01.0 2.0 3.0 4.0 5.0
12
8.0
0
4.0
16
20
TA = −40°C
TA = 125°C
VCD = 0.5 V
0
VCD, DELAY PIN VOLTAGE (V)
0.2 0.4 0.6 0.8 1.0
1.5
0.5
0
1.0
TA = 25°C
ICD, CD DELAY PIN SINK CURRENT (mA)
Vin = 0.85 V
Vin = 0.7 V
16
12
8.0
4.0
0
00.5 1.0 1.5 2.0 2.5
VCD, DELAY PIN VOLTAGE (V)
TA = 25°CVin = 2.5 V
Vin = 2.0 V
Vin = 1.5 V
ICD, CD DELAY PIN SINK CURRENT (mA)
0 1.0 2.0 3.0
10
0
4.
0
40
20
30
VCD, DELAY PIN VOLTAGE (V)
TA = 25°C
Vin = 4.0 V
Vin = 3.5 V
Vin = 3.0 V
Vin = 2.5 V
ICD, CD DELAY PIN SINK CURRENT (mA)
14
12
1.6
NCP302, NCP303
http://onsemi.com
14
Figure 27. NCP302/3 Series 0.9 V
CD Delay Pin Threshold Voltage vs. Temperature
Figure 28. NCP302/3 Series 2.7 V
CD Delay Pin Threshold Voltage vs. Temperature
Figure 29. NCP302/3 Series 4.5 V
CD Delay Pin Threshold Voltage vs. Temperature
Figure 30. NCP302/3 Series 0.9 V
Output Time Delay vs. Capacitance
Figure 31. NCP302/3 Series 2.7 V
Output Time Delay vs. Capacitance
Figure 32. NCP302/3 Series 4.5 V
Output Time Delay vs. Capacitance
−50
0.9
0.8
0.7
0.6
0.4
−25 025 50 75 100
0.5
0.3
TA, AMBIENT TEMPERATURE (°C)
VTCD, CD PIN THRESHOLD VOLTAGE (V)
Vin = 0.99 V
−50
2.2
2.1
2.0
1.8
−25 025 50 75 125
1.9
1.7
TA, AMBIENT TEMPERATURE (°C)
VTCD, CD PIN THRESHOLD VOLTAGE (V)
Vin = 2.97 V
−50
3.6
3.5
3.4
3.3
3.7
−25 025 50 75 125
3.2
TA, AMBIENT TEMPERATURE (°C)
VTCD, CD PIN THRESHOLD VOLTAGE (V)
Vin = 4.95 V
0.00001 0.001 0.01 0.1 1.0
10000
1000
100
10
0.1
1.0
CD, DELAY PIN CAPACITANCE ( mF)
TA = 25°C
tD2 (ms)
tD1 (ms)
, t D2, OUTPUT TIME DELAYtD1
100
0.0001
100
0.00001 0.001 0.01 0.1 1.
0
10000
1000
100
10
0.1
1.0
CD, DELAY PIN CAPACITANCE ( mF)
TA = 25°C
tD2 (ms)
tD1 (ms)
, t D2, OUTPUT TIME DELAYtD1
0.0001
0.00001 0.001 0.01 0.1 1.
0
10000
1000
100
10
0.1
1.0
CD, DELAY PIN CAPACITANCE ( mF)
TA = 25°C
tD2 (ms)
tD1 (ms)
, t D2, OUTPUT TIME DELAYtD1
0.0001
NCP302, NCP303
http://onsemi.com
15
Figure 33. NCP302/3 Series 0.9 V
Reset Output Time Delay vs. Temperature
Figure 34. NCP302/3 Series 2.7 V
Reset Output Time Delay vs. Temperature
Figure 35. NCP302/3 Series 4.5 V
Reset Output Time Delay vs. Temperature
Figure 36. NCP302/3 Series
Delay Resistance vs. Temperature
−50
TA, AMBIENT TEMPERATURE (°C)
250
200
160
80
−25 025 50 75 100
120
0
CD = 0.1 mF
tD2, OUTPUT TIME DELAY (ms)
120
80
40
0
−50 −25 025 50 75 125
TA, AMBIENT TEMPERATURE (°C)
20
60
100
160
CD = 0.1 mF
tD2, OUTPUT TIME DELAY (ms)
−50
TA, AMBIENT TEMPERATURE (°C)
250
200
150
50
−25 025 50 75 100
100
0
CD = 0.1 mF
tD2, OUTPUT TIME DELAY (ms)
1.6
1.2
0.8
0.4
0
−50 −25 025 50 75 125
TA, AMBIENT TEMPERATURE (°C)
RD, DELAY RESISTANCE (MW)
100
140
100
40
NCP302, NCP303
http://onsemi.com
16
OPERATING DESCRIPTION
The NCP302 and NCP303 series devices consist of a
precision voltage detector that drives a time delay generator.
Figures 37 and 38 show a timing diagram and a typical
application. Initially consider that input voltage Vin is at a
nominal level and it is greater than the voltage detector upper
threshold (VDET+). The voltage at Pin 5 and capacitor CD
will be at the same level as Vin, and the reset output (Pin 1)
will be in the high state for active low devices, or in the low
state for active high devices. If there is a power interruption
and Vin becomes significantly deficient, it will fall below the
lower detector threshold (VDET−) and the external time
delay capacitor CD will be immediately discharged by an
internal N−Channel MOSFET that connects to Pin 5. This
sequence of events causes the Reset output to be in the low
state for active low devices, or in the high state for active
high devices. After completion of the power interruption,
Vin will again return to its nominal level and become greater
than the VDET+. The voltage detector will turn off the
N−Channel MOSFET and allow pullup resistor RD to charge
external capacitor CD, thus creating a programmable delay
for releasing the reset signal. When the voltage at Pin 5
exceeds the inverter/buffer threshold, typically 0.675 Vin,
the reset output will revert back to its original state. The reset
output time delay versus capacitance is shown in Figures 30
through 32. The voltage detector and inverter/buffer have
built−in hysteresis to prevent erratic reset operation.
Although these device series are specifically designed for
use as reset controllers in portable microprocessor based
systems, they offer a cost−effective solution in numerous
applications where precise voltage monitoring and time
delay are required. Figures 38 through 46 show various
application examples.
Figure 37. Timing Waveforms
tD2
Vin
VDET+
VDET−
Input Voltage, Pin 2
Capacitor, Pin 5
Vin
0 V
Reset Output (Active Low), Pin 1
Vin
Reset Output (Active High), Pin 1
Vin
0 V
0.675 Vin
VDET−
VDET−
NCP302, NCP303
http://onsemi.com
17
APPLICATION CIRCUIT INFORMATION
Figure 38. Microprocessor Reset Circuit
2 Input
1
Reset Output
GN
D
5
CD
NCP302
LSN27T1
Figure 39. Battery Charge Indicator
2 Input
1
Reset Output
GN
DGND
VDD
Reset
VDD
5
CD
CD
NCP302
Series
3
3
Microprocessor
* Required for
NCP303
Vin < 2.7 ON
Vin > 2.835 ON
To Additional Circuitry
2 Input
1
Reset Output
GN
D
5
CD
NCP303
LSN45T1
Figure 40. Missing Pulse Detector or Frequency Detector
3
Vsupply
To Additional Circuitry
CD
*
Reset Output
CD
Input
[0.675*Vin
Missing Pulse
tD2
470 k
0.001 mF
2.85 V
2.70 V
0 V
5.0 V
1.0 V
0 V
Vin
NCP302, NCP303
http://onsemi.com
18
Figure 41. Microprocessor Reset Circuit with Additional Hysteresis
2
1
NCP301
LSN27T1
3
VDD
GN
D
Reset Output
Input
RH
RL
NCP301
LSN27T1
GN
D
NCP303
LSN27T1
GN
D
GN
D
Reset
VDD
Microprocessor
5
CD
Comparator hysteresis can be increased with the addition of
resistor RH. The hysteresis equations have been simplified and
do not account for the change of input current Iin as Vin crosses
the comparator threshold. The internal resistance, Rin is simply
calculated using Iin = 0.26 mA at 2.6 V.
Vin Decreasing:
Vth +ǒRH
Rin )1ǓǒVDET*Ǔ
Vin Increasing:
Vth +ǒRH
Rin øRL
)1ǓǒVDET*)VHYSǓ
VHYS = Vin Increasing − Vin Decreasing
Test Data
Vth Decreasing
(V)
Vth Increasing
(V)
VHYS
(V)
RH
(W)
RL
(kW)
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
2.84
2.87
2.88
2.91
2.90
2.94
2.98
2.70
3.04
3.15
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
0.135
0.17
0.19
0.21
0.20
0.24
0.28
0.27
0.34
0.35
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁ
0
100
100
100
220
220
220
470
470
470
ÁÁ
ÁÁ
ÁÁ
ÁÁ
ÁÁ
ÁÁ
ÁÁ
ÁÁ
−
10
6.8
4.3
10
6.8
4.3
10
6.8
4.3
Figure 42. Simple Clock Oscillator
NCP301
LSN27T1
GN
D
Reset Output
Input
82 k
NCP301
LSN27T1
GN
D
NCP302
HSN27T1
GN
D
C
5.0 V
100 k
C (mF) fOSC (kHz) IQ (mA)
0.01 2590 21.77
0.1 490 21.97
1.0 52 22.07
Test Data
5
CD
2
3
1
NCP302, NCP303
http://onsemi.com
19
Figure 43. Microcontroller Systems Load Sensing
NCP301
LSN27T1
50 k
NCP301
LSN27T1
NCP303
LSN09T1
Vsupply
Load
Rsense Input
2
3GND
1
Reset Output
Microcontroller
GND
VDD
If:
ILoad t VDET −/Rsense
ILoad w (VDET −+VHYS)/Rsense
Then:
Reset Output = 0 V
Reset Output = VDD
This circuit monitors the current at the load. As
current flows through the load, a voltage drop with
respect to ground appears across Rsense where
Vsense = Iload * Rsense. The following conditions apply:
5
CD
Figure 44. LED Bar Graph Voltage Monitor
NCP301
LSN27T1
2
NCP301
LSN27T1
NCP303
LSN45T1
3
1
Vsupply
NCP301
LSN27T1
2
NCP301
LSN27T1
NCP303
LSN27T1
3
1
NCP301
LSN27T1
2
NCP301
LSN27T1
NCP303
LSN18T1
3
1
Input
GND
Reset
Output
Input
GND
Reset
Output
Input
GND
Reset
Output
Vin = 1.0 V to 10 V
A simple voltage monitor can be constructed by connecting several voltage detectors as shown above. Each LED will
sequentially turn on when the respective voltage detector threshold (VDET− +VHYS) is exceeded. Note that detector
thresholds (VDET−) that range from 0.9 V to 4.9 V in 100 mV steps can be manufactured.
5
CD
5
CD
5
CD
NCP302, NCP303
http://onsemi.com
20
Figure 45. Undervoltage Detection with Independent Reset Signal Control
2
1
5
3
Reset Output
EN
Input
VDD
CD
CD
GND
To MCU or
Logic Circuitry
Logic 1
IN
NCP302L
Series
VDD
VDD
0 V
0 V
0 V
0
1
VDET
VTCD
tD2 tD2
NCP302
Input Pin
Logic 1
Enable
Pin
Reset
Output
CD Pin
Note: Logic 1 is in tristate when EN = 0,
VTCD 0.675 * VDD
This circuit monitors VDD for undervoltage. If the VDD
input falls below the detector threshold (VDET−), then the
capacitor on the CD pin will be immediately discharged
resulting in the reset output changing to its active state
indicating that an undervoltage event has been detected. The
addition of a logic gate (Logic 1) provides for reset output
control which is independent of VDD. If the output of the
logic gate is tristated the undervoltage detector will behave
normally. If the tristate is de−asserted, the logic gate will pull
the CD pin low resulting in the Reset Output pin changing to
an active state. This independent control is useful in power
supply sequencing applications when the Reset Output is
tied to the enable input of an LDO or DC−DC converter.
NCP302, NCP303
http://onsemi.com
21
Figure 46. Multi−Rail Supply Undervoltage Monitor with Power Good
*
R1 is Optional CD Pin Pullup
3.3 V Power Supply 2
(I/O Subsystem)
VIN
VIN
0 V
0 V
0 V
VTCD
CD Pin
Note: VTCD 0.675 * VIN tD2
2
1
5
3
Reset Output
Input
CD
GND
NCP302L
Series
2
1
3
Reset Output
Input
GND
2
1
3
Reset Output
Input
GND
NCP301
LSN30T1
NCP301
LSN45T1
CD
5.0 V Power Supply 3
(Peripheral Subsystem)
Power Supply 1
(System Core)
R1 RP
*Required for
NCP303
To MCU or
Logic Circuitry
0 V
0 V
tD2 tD2 tD2
Power Supply 1
Power Supply 2
VP
Power Supply 3
NCP302L
RESET Output
This circuit monitors multiple power supply rails for
undervoltage conditions. If any of the three power supplies
are in an undervoltage condition, the NCP302 reset output
will be immediately set to an active low level. All three
power supplies must be above their minimum voltage levels
for the NCP302 reset output to generate a “Power Good”
level (Reset Output = Power Supply 1 or VP).
Optionally, R1 may be added to provide a smaller
effective CD pin pullup resistance, (RD’), where
RD’ = R1 || RD, with RD (internal CD pin pullup resistance)
approximately equal to 1.0 MW, and R1 > 5 kW. If R1 << RD,
then R1 also can decrease the reset output delay time (tD2)
variance over the operating temperature range.
The Power Good signal time delay (tD2) can be estimated
by: tD2 ≈ RD * CD, with RD in Ohms, and CD in Farads. If
R1 is installed, then RD’ is substituted for RD. RP is added
only if using the NCP303 to replace the NCP302. This
allows the Reset Output to be pulled up to VP
, which can be
the Power Supply 1 or an independent power supply rail.
NCP302, NCP303
http://onsemi.com
22
ORDERING INFORMATION
Device
Threshold
Voltage
Output
Type Reset Marking Package Shipping†
NCP302LSN09T1 0.9
CMOS Active
Low
SBO TSOP−5
3000 / Tape & Reel
(7 inch Reel)
NCP302LSN09T1G TSOP−5
(Pb−Free)
NCP302LSN15T1 1.5 SBI TSOP−5
NCP302LSN15T1G TSOP−5
(Pb−Free)
NCP302LSN18T1 1.8 SBF TSOP−5
NCP302LSN18T1G TSOP−5
(Pb−Free)
NCP302LSN20T1 2.0 SBD TSOP−5
NCP302LSN20T1G TSOP−5
(Pb−Free)
NCP302LSN27T1 2.7 SAW TSOP−5
NCP302LSN27T1G TSOP−5
(Pb−Free)
NCP302LSN30T1 3.0 SAT TSOP−5
NCP302LSN30T1G TSOP−5
(Pb−Free)
NCV302LSN30T1G* ACJ
NCP302LSN33T1 3.3 SAQ TSOP−5
NCP302LSN33T1G TSOP−5
(Pb−Free)
NCP302LSN38T1 3.8 SAK TSOP−5
NCP302LSN38T1G TSOP−5
(Pb−Free)
NCP302LSN40T1 4.0 SAI TSOP−5
NCP302LSN40T1G TSOP−5
(Pb−Free)
NCP302LSN43T1 4.3 SAF TSOP−5
NCP302LSN43T1G TSOP−5
(Pb−Free)
NCP302LSN45T1 4.5 SAL TSOP−5
NCP302LSN45T1G TSOP−5
(Pb−Free)
NCP302LSN47T1 4.7 SAC TSOP−5
NCP302LSN47T1G TSOP−5
(Pb−Free)
NCP302HSN09T1 0.9
CMOS Active
High
SDO TSOP−5
3000 / Tape & Reel
(7 inch Reel)
NCP302HSN09T1G TSOP−5
(Pb−Free)
NCP302HSN18T1 1.8 SFH TSOP−5
NCP302HSN18T1G TSOP−5
(Pb−Free)
NCP302HSN27T1 2.7 SDK TSOP−5
NCP302HSN27T1G TSOP−5
(Pb−Free)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices,
ranging from 0.9 V to 4.9 V in 100 mV increments and NCP302 active high output devices, ranging from 0.9 V to 4.9 V in 100 mV increments
can be manufactured. Contact your ON Semiconductor representative for availability. The electrical characteristics of these additional
devices are shown in Tables 1 and 2.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV prefix for automotive and other applications requiring site and control changes.
NCVxxx: Tlow = −40°C, Thigh = +125°C. Guaranteed by design.
NCP302, NCP303
http://onsemi.com
23
ORDERING INFORMATION
Device Shipping†
PackageMarkingReset
Output
Type
Threshold
Voltage
NCP302HSN30T1 3.0
CMOS Active
High
SDI TSOP−5
3000 / Tape & Reel
(7 inch Reel)
NCP302HSN30T1G TSOP−5
(Pb−Free)
NCP302HSN40T1 4.0 SJH TSOP−5
NCP302HSN40T1G TSOP−5
(Pb−Free)
NCP302HSN45T1 4.5 SDG TSOP−5
NCP302HSN45T1G TSOP−5
(Pb−Free)
NCP303LSN09T1 0.9
Open
Drain
Active
Low
SDE TSOP−5
3000 / Tape & Reel
(7 inch Reel)
NCP303LSN09T1G TSOP−5
(Pb−Free)
NCP303LSN10T1G 1.0 SDD TSOP−5
(Pb−Free)
NCV303LSN10T1* SSM TSOP−5
NCV303LSN10T1G* TSOP−5
(Pb−Free)
NCP303LSN11T1 1.1 SDC TSOP−5
NCP303LSN11T1G TSOP−5
(Pb−Free)
NCV303LSN11T1G* ADC
NCV303LSN12T1G* 1.2 SDB
NCP303LSN13T1 1.3 SDA TSOP−5
NCP303LSN13T1G TSOP−5
(Pb−Free)
NCV303LSN13T1G* SRS
NCP303LSN14T1 1.4 SCZ TSOP−5
NCP303LSN14T1G TSOP−5
(Pb−Free)
NCV303LSN14T1G* SRT
NCP303LSN15T1 1.5 SCY TSOP−5
NCP303LSN15T1G TSOP−5
(Pb−Free)
NCV303LSN15T1G* SRU
NCP303LSN16T1 1.6 SCX TSOP−5
NCP303LSN16T1G TSOP−5
(Pb−Free)
NCV303LSN16T1G* SRV
NCP303LSN17T1G 1.7 SCW TSOP−5
NCP303LSN18T1 1.8 SCV TSOP−5
NCP303LSN18T1G TSOP−5
(Pb−Free)
NCP303LSN20T1 2.0 SCT TSOP−5
NCP303LSN20T1G TSOP−5
(Pb−Free)
NCV303LSN20T1G* SRW
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices,
ranging from 0.9 V to 4.9 V in 100 mV increments and NCP302 active high output devices, ranging from 0.9 V to 4.9 V in 100 mV increments
can be manufactured. Contact your ON Semiconductor representative for availability. The electrical characteristics of these additional
devices are shown in Tables 1 and 2.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV prefix for automotive and other applications requiring site and control changes.
NCVxxx: Tlow = −40°C, Thigh = +125°C. Guaranteed by design.
NCP302, NCP303
http://onsemi.com
24
ORDERING INFORMATION
Device Shipping†
PackageMarkingReset
Output
Type
Threshold
Voltage
NCP303LSN22T1 2.2
Open
Drain
Active
Low
SCR TSOP−5
3000 / Tape & Reel
(7 inch Reel)
NCP303LSN22T1G TSOP−5
(Pb−Free)
NCV303LSN22T1G* ADD
NCP303LSN23T1 2.3 SCQ TSOP−5
NCP303LSN23T1G TSOP−5
(Pb−Free)
NCV303LSN23T1G* SRX
NCP303LSN24T1 2.4 SCP TSOP−5
NCP303LSN24T1G TSOP−5
(Pb−Free)
NCP303LSN25T1 2.5 SCO TSOP−5
NCP303LSN25T1G TSOP−5
(Pb−Free)
NCP303LSN26T1 2.6 SCN TSOP−5
NCP303LSN26T1G TSOP−5
(Pb−Free)
NCP303LSN27T1 2.7 SCM TSOP−5
NCP303LSN27T1G TSOP−5
(Pb−Free)
NCP303LSN28T1 2.8 SCL TSOP−5
NCP303LSN28T1G TSOP−5
(Pb−Free)
NCV303LSN28T1G* TAA
NCP303LSN29T1 2.9 SCK TSOP−5
NCP303LSN29T1G TSOP−5
(Pb−Free)
NCV303LSN29T1* SSK TSOP−5
NCV303LSN29T1G* TSOP−5
(Pb−Free)
NCP303LSN30T1 3.0 SCJ TSOP−5
NCP303LSN30T1G TSOP−5
(Pb−Free)
NCV303LSN30T1* SSA TSOP−5
NCV303LSN30T1G* TSOP−5
(Pb−Free)
NCP303LSN31T1 3.1 SCI TSOP−5
NCP303LSN31T1G TSOP−5
(Pb−Free)
NCV303LSN31T1G* CAR TSOP−5
(Pb−Free)
NCP303LSN32T1 3.2 SCH TSOP−5
NCP303LSN32T1G TSOP−5
(Pb−Free)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices,
ranging from 0.9 V to 4.9 V in 100 mV increments and NCP302 active high output devices, ranging from 0.9 V to 4.9 V in 100 mV increments
can be manufactured. Contact your ON Semiconductor representative for availability. The electrical characteristics of these additional
devices are shown in Tables 1 and 2.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV prefix for automotive and other applications requiring site and control changes.
NCVxxx: Tlow = −40°C, Thigh = +125°C. Guaranteed by design.
NCP302, NCP303
http://onsemi.com
25
ORDERING INFORMATION
Device Shipping†
PackageMarkingReset
Output
Type
Threshold
Voltage
NCP303LSN33T1 3.3
Open
Drain
Active
Low
SCG TSOP−5
3000 / Tape & Reel
(7 inch Reel)
NCP303LSN33T1G TSOP−5
(Pb−Free)
NCP303LSN34T1 3.4 SCF TSOP−5
NCP303LSN34T1G TSOP−5
(Pb−Free)
NCV303LSN34T1G* CAT
NCP303LSN36T1 3.6 SCD TSOP−5
NCP303LSN36T1G TSOP−5
(Pb−Free)
NCV303LSN36T1G* SSC
NCP303LSN38T1 3.8 SCA TSOP−5
NCP303LSN38T1G TSOP−5
(Pb−Free)
NCP303LSN40T1 4.0 SBY TSOP−5
NCP303LSN40T1G TSOP−5
(Pb−Free)
NCP303LSN42T1 4.2 SBW TSOP−5
NCP303LSN42T1G TSOP−5
(Pb−Free)
NCV303LSN42T1G* SSE
NCV303LSN43T1G* 4.3 SBV
NCP303LSN44T1 4.4 SBU TSOP−5
NCP303LSN44T1G TSOP−5
(Pb−Free)
NCV303LSN44T1* SSF TSOP−5
NCV303LSN44T1G* TSOP−5
(Pb−Free)
NCP303LSN45T1 4.5 SBT TSOP−5
NCP303LSN45T1G TSOP−5
(Pb−Free)
NCV303LSN45T1G* SSG
NCP303LSN46T1 4.6 SBS TSOP−5
NCP303LSN46T1G TSOP−5
(Pb−Free)
NCV303LSN46T1* SSH TSOP−5
NCV303LSN46T1G* TSOP−5
(Pb−Free)
NCP303LSN47T1 4.7 SBR TSOP−5
NCP303LSN47T1G TSOP−5
(Pb−Free)
NCV303LSN47T1* SSJ TSOP−5
NCV303LSN47T1G* TSOP−5
(Pb−Free)
NCP303LSN49T1 4.9 SBP TSOP−5
NCP303LSN49T1G TSOP−5
(Pb−Free)
NCV303LSN49T1* SSI TSOP−5
NCV303LSN49T1G* TSOP−5
(Pb−Free)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices,
ranging from 0.9 V to 4.9 V in 100 mV increments and NCP302 active high output devices, ranging from 0.9 V to 4.9 V in 100 mV increments
can be manufactured. Contact your ON Semiconductor representative for availability. The electrical characteristics of these additional
devices are shown in Tables 1 and 2.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV prefix for automotive and other applications requiring site and control changes.
NCVxxx: Tlow = −40°C, Thigh = +125°C. Guaranteed by design.
NCP302, NCP303
http://onsemi.com
26
PACKAGE DIMENSIONS
0.7
0.028
1.0
0.039
ǒmm
inchesǓ
SCALE 10:1
0.95
0.037
2.4
0.094
1.9
0.074
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
TSOP−5
(SOT−23−5/SC59−5)
CASE 483−02
ISSUE H
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES
LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS
OF BASE MATERIAL.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
5. OPTIONAL CONSTRUCTION: AN
ADDITIONAL TRIMMED LEAD IS ALLOWED
IN THIS LOCATION. TRIMMED LEAD NOT TO
EXTEND MORE THAN 0.2 FROM BODY.
DIM MIN MAX
MILLIMETERS
A3.00 BSC
B1.50 BSC
C0.90 1.10
D0.25 0.50
G0.95 BSC
H0.01 0.10
J0.10 0.26
K0.20 0.60
L1.25 1.55
M0 10
S2.50 3.00
123
54 S
A
G
L
B
D
H
C
J
__
0.20
5X
CAB
T0.10
2X
2X T0.20
NOTE 5
T
SEATING
PLANE
0.05
K
M
DETAIL Z
DETAIL Z
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
NCP302/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loca
l
Sales Representative
