LCA127L Single-Pole, Normally Open OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max RON Ratings 250 170 15 Description Units VP mA The LCA127L is a current-limiting, 250V, 170mA, 15, normally open (1-Form-A) solid state relay featuring low on-resistance, which uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. Features * * * * * * * * * * * Current Limiting 3750Vrms Input/Output Isolation Small 6-Pin Package Low Drive Power Requirements (TTL/CMOS Compatible) High Reliability Arc-Free With No Snubbing Circuits FCC Compatible VDE Compatible No EMI/RFI Generation Machine Insertable, Wave Solderable Surface Mount Tape & Reel Version Available LCA127L can be used to replace mechanical relays, and offers the superior reliability associated with semiconductor devices. Because it has no moving parts, it offers faster, bounce-free switching in a more compact surface mount or thru-hole package. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate: B 09 07 49410 004 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # LCA127L LCA127LS LCA127LSTR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1,000/Reel) Pin Configuration AC/DC Configuration + Control - Control Do Not Use 1 6 2 5 3 4 Load Do Not Use Load DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb RoHS 2002/95/EC DS-LCA127L-R03 toff e3 www.clare.com 1 LCA127L Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mW / C 2 Derate Linearly 6.67 mW / C Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous AC/DC Configuration DC Configuration Load Current Limiting On-Resistance 1 AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 Conditions Min Typ Max 190 235 170 250 280 ILEAK - 13 5 - 15 6 1 A VL=50V, f=1MHz ton toff COUT - 50 5 5 - ms ms pF IL = 200mA IF = 5mA VR = 5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF - Symbol IL ICL IL=200mA IL=200mA VL=250VP IF = 5mA, VL = 10V RON Units mA mA Measurement taken within 1 second of on-time. 2 www.clare.com R03 LCA127L PERFORMANCE DATA* 15 10 5 0.33 0.55 0.77 0.99 1.21 15 10 5 20 15 10 0 0.05 0.08 0.11 0.14 0.17 11.25 0.20 11.75 12.25 12.75 13.25 13.75 Turn-On (ms) Turn-Off (ms) On-Resistance () Typical IF for Switch Operation (N=50, IL=170mADC, TA=25C) Typical IF for Switch Dropout (N=50, IL=170mADC, TA=25C) Typical Blocking Voltage Distribution (N=50, TA=25C) 25 Device Count (N) 20 15 10 5 35 30 20 15 10 5 25 20 15 10 5 0 0.45 0.63 0.81 0.99 1.17 1.35 0 0.45 1.53 0.63 0.81 0.99 1.17 1.35 1.53 262.5 Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical Turn-On vs. LED Forward Current (IL=170mADC) 0.7 0.5 0.10 10 0.4 0.3 0.2 5 0.1 0 0 1.19 1.21 1.23 Turn-Off (ms) 25 Turn-On (ms) 0.12 15 282.5 287.5 0.08 0.06 0.04 0.02 0 0 1.25 277.5 Typical Turn-Off vs. LED Forward Current (IL=170mADC) 0.14 30 20 272.5 Blocking Voltage (VP) 0.6 1.17 267.5 LED Current (mA) LED Current (mA) 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 LED Forward Voltage Drop (V) LED Forward Current (mA) LED Forward Current (mA) Typical LED Forward Voltage Drop vs. Temperature Typical Turn-On vs. Temperature (IL=170mADC) Typical Turn-Off vs. Temperature (IF=5mA, IL=170mADC) 3.0 1.6 2.5 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.18 0.14 2.0 IF=5mA IF=10mA IF=20mA 1.5 1.0 -20 0 20 40 60 Temperature (C) 80 100 120 0.10 0.08 0.06 0.02 0 0 -40 0.12 0.04 0.5 0.8 50 0.16 Turn-Off (ms) 1.8 Turn-On (ms) Device Count (N) 25 5 1.43 0 LED Forward Voltage Drop (V) Typical On-Resistance Distribution (N=50, IF=5mA, IL=170mADC, TA=25C) 30 20 Device Count (N) 25 35 35 0 0 Device Count (N) Typical Turn-Off Time (N=50, IF=5mA, IL=170mADC, TA=25C) Device Count (N) 20 25 Device Count (N) Device Count (N) 25 Typical Turn-On Time (N=50, IF=5mA, IL=170mADC, TA=25C) -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 LCA127L PERFORMANCE DATA* Typical IF for Switch Operation vs. Temperature (IL=170mADC) 2.5 2.0 1.5 1.0 0.5 -40 -20 0 20 40 60 80 1.5 1.0 0.5 50 40 30 20 0 -20 0 20 40 60 80 -40 100 -20 0 20 40 60 Temperature (C) Temperature (C) Temperature (C) Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) Typical Load Current vs. Temperature Typical Blocking Voltage vs. Temperature 50 0 -50 -100 350 350 300 300 250 200 150 50 0 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) Typical Leakage vs. Temperature Measured across Pins 4&6 0.018 0.016 Load Current (A) 0.014 0.012 0.01 0.008 0.006 0.004 -20 0 20 40 60 80 100 -20 0 20 40 60 Temperature (C) 80 100 100 80 100 80 100 250 200 150 100 50 -40 120 -20 0 20 40 60 Temperature (C) Temperature (C) Energy Rating Curve Typical Current Limiting vs. Temperature (IF=5mA) 1.2 300 1.0 250 0.8 0.6 0.4 200 150 100 50 0.2 0.002 80 0 -40 Current (mA) -200 -2.5 -2.0 -1.5 -1.0 -0.5 0 -40 IF=20mA IF=10mA IF=5mA 100 Blocking Voltage (VP) Load Current (mA) 100 -150 Leakage (A) Typical On-Resistance vs. Temperature (IF=5mA, IL=170mADC) 10 -40 100 150 Load Current (mA) 2.0 0 0 200 60 On-Resistance () Operate Current (mA) Operate Current (mA) 2.5 Typical IF for Switch Dropout vs. Temperature (IL=170mADC) 0 10s 100s 1ms 10ms 100ms 0 1s Time 10s 100s -40 -20 0 20 40 60 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 LCA127L Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LCA127L / LCA127LS MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LCA127L / LCA127LS 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R03 RoHS 2002/95/EC e3 www.clare.com 5 LCA127L MECHANICAL DIMENSIONS LCA127L 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) LCA127LS 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.clare.com R03 LCA127L LCA127LS Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LCA127L-R03 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/23/2010