Semiconductor Group 1 Short Description 1998-02-01
TRILITHICTM BTS 770
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
BTS 770 Q67007-A9254 P-DSO-28-9
AEB02372
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
DC Full Bridge Driver
Control Input
ESD
Protection
Feedback
Single Line
µ
C Compatible
Features
• Free configurable as bridge or quad-switch
• Optimized for DC motor management applications
• Ultra low RDSON @ 25 °C :
High-side switch: typ. 165 mΩ
Low-side switch: typ. 55 mΩ
• Very high peak current capability
• Very low quiescent curr ent
• Space- and thermal optimized power P-DSO-Package
• Operates up to 40 V
• Load/GND-short-circuit-protected
• Status flag diagnosis
• Overtemperature shut down with hysteresis
• Short-circuit detection and diagnosis
• Open-load detection and diagnosis
• C-MOS compatible inputs
• Internal clamp diodes
• Isolat ed sources for external c urrent sensi ng
• Over- and under-voltage detect ion with hysteresis
P-DSO-28-9
Semiconductor Group 2 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VSVUVOFF 36 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 43 V
Junction temperature Tj– 40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––35µAVS = 13.2 V
RDSO; Bridge in Path RDSOP – 200 500 mΩ–
RDSON; High-Side-Switch RDSONH – 165 220 mΩTj=25°C
RDSON; Low-Side-Switch RDSONL – 4565mΩTj=25°C
Short circuit output current ISCP 5.5 – 9 A Tj=85°C
Open load detection
current IOCD 10 – 200 mA –
Pull-down resi stan ce RO1,2 4–30kΩ–
Undervolt. switch ON
voltage VUVON ––7VVS increasing
Undervolt. switch OFF
voltage VUVOFF 3.5 – – V VS decreasing
BTS 770
Semiconductor Group 3 Short Description 1998-02-01
TRILITHICTM BTS 771
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
BTS 771 Q67007-A9274 P-DSO-28-9
AEB02373
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
DC Full Bridge Driver
Control Input
ESD
Protection
Feedback
Single Line
µ
C Compatible
Features
• Free configurable as bridge or quad-switch
• Optimized for DC motor management applications
• Ultra low RDSON @ 25 °C :
High-side switch: typ. 85 mΩ
Low-side switch: typ. 40 mΩ
• Very high peak current capability
• Very low quiescent curr ent
• Space- and thermal optimized power P-DSO-Package
• Operates up to 40 V
• Load/GND-short-circuit-protected
• Status flag diagnosis
• Overtemperature shut down with hysteresis
• Short-circuit detection and diagnosis
• Open-load detection and diagnosis
• C-MOS compatible inputs
• Internal clamp diodes
• Isolat ed sources for external c urrent sensi ng
• Over- and under-voltage detect ion with hysteresis
P-DSO-28-9
Semiconductor Group 4 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VSVUVOFF 36 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 43 V
Junction temperature Tj– 40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––35µAVS = 13.2 V
RDSON; Bridge in Path RDSONP ––300mΩ–
RDSON; High-Side-Switch RDSONH –85110mΩTj=25°C
RDSON; Low-Side-Swi tch RDSONL – 4055mΩTj=25°C
Short circuit output current ISCP 7–18ATj=85°C
Open load detection current IOCD 20 – 400 mA –
Pull-down resistance RO1,2 4–30kΩ–
Undervolt. switch ON
voltage VUVON ––7VVS increasing
Undervolt. sw itch OFF
voltage VUVOFF 3.5 – – V VS decreasing
BTS 771
Semiconductor Group 5 Short Description 1998-02-01
TRILITHICTM BTS 774
Preliminary Data
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
BTS 774 on request P-DSO-28-9
AEB02409
µ
Protection
C Compatible
ESD
Selfprotection
-Overtemperature
-Overload
-Short circuit
Single Line
Control Input
Feedback
-Open circuit
-Short circuit
-Overload
-Overtemperature
Diagnostics DC Full Bridge Driver
Features
• Free configurable as bridge or quad-switch
• Optimized for DC motor management applications
• Ultra low RDSON @ 25 °C :
High-side switch: typ. 165 mΩ
Low-side switch: typ. 55 mΩ
• Very high peak current capability
• Very low quiescent curr ent
• Space- and thermal optimized power P-DSO-Package
• Operates up to 40 V
•FULL-short-circuit-protected
• Status flag diagnosis
• Overtemperature shut down with hysteresis
• Short-circuit detection and diagnosis
• Open-load detection and diagnosis
• C-MOS compatible inputs
• Internal clamp diodes
• Isolat ed sources for external c urrent sensi ng
• Over- and under-voltage detect ion with hysteresis
P-DSO-28-9
Semiconductor Group 6 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VSVUVOFF 36 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 43 V
Junction temperature Tj– 40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––50µAVS = 13.2 V
RDSON; Path in Bridge
Config. RDSONP – 200 500 mΩ–
RDSON; High-Side-Switch RDSONH – 165 220 mΩTj=25°C
RDSON; Low-Side-Swi tch RDSONL – 4560mΩTj=25°C
Short circuit output current ISCP 5.5 – 9 A Tj=85°C
Pull-down resistance RO1,2 4–30kΩ–
Undervolt. switch ON
voltage VUVON ––7VVS increasing
Undervolt. sw itch OFF
voltage VUVOFF 3.5 – – V VS decreasing
BTS 774
Semiconductor Group 7 Short Description 1998-02-01
TRILITHICTM BTS 775
Preliminary Data
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
BTS 775 on request P-DSO-28-9
AEB02409
µ
Protection
C Compatible
ESD
Selfprotection
-Overtemperature
-Overload
-Short circuit
Single Line
Control Input
Feedback
-Open circuit
-Short circuit
-Overload
-Overtemperature
Diagnostics DC Full Bridge Driver
Features
• Free configurable as bridge or quad-switch
• Optimized for DC motor management applications
• Ultra low RDSON @ 25 °C :
High-side switch: typ. 85 mΩ
Low-side switch: typ. 45 mΩ
• Very high peak current capability
• Very low quiescent curr ent
• Space- and thermal optimized power P-DSO-Package
• Operates up to 40 V
•FULL-short-circuit-protected
• Status flag diagnosis
• Overtemperature shut down with hysteresis
• Short-circuit detection and diagnosis
• Open-load detection and diagnosis
• C-MOS compatible inputs
• Internal clamp diodes
• Isolat ed sources for external c urrent sensi ng
• Over- and under-voltage detect ion with hysteresis
P-DSO-28-9
Semiconductor Group 8 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VSVUVOFF 36 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 43 V
Output current IQA
Junction temperature Tj– 40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––50µAVS=13.2V
RDSON; Path in Bridge
Config. RDSONP ––320mΩ–
RDSON; High-Side-Switch RDSONH –85110mΩTj=25°C
RDSON; Low-Side-Switch RDSONL – 4560mΩTj=25°C
Short circuit output current ISCP 7–18ATj=85°C
Pull-down resistance RO1,2 4–30Ω–
Undervolt. switch ON
voltage VUVON ––7VVS increasing
Undervolt. switch OFF
voltage VUVOFF 3.5 – – V VS decreasing
BTS 775
Semiconductor Group 9 Short Description 1998-02-01
TRILITHICTM BTS 780
Target Data
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
BTS 780 on request P-TO263-15-1
AEB02374
µ
Protection
C Compatible
ESD
HS-Selfprotection
-Overtemperature
-Overload
-Short circuit
Dual Line
Control Input
HS-Feedback
-Open circuit
-Short circuit
-Overload
-Overtemperature
HS-Diagnostics DC Full Bridge Driver
Features
• Free configurable as bridge or quad-switch
• Optimized for DC motor management applications
• Ultra low RDSON @ 25 °C :
High-side switch: typ. 35 mΩ
Low-side switch: typ. 15 mΩ
• Very high peak current capability
• Very low quiescent curr ent
• Space- and thermal optimized power SMD-Package
• Load/GND-short-circuit-protected
• Operates up to 40 V
• 2-Bit status flag diagnosis
• Overtemperature shut down with hysteresis
• Short-circuit detection and diagnosis
• Open-load detection and diagnosis
• C-MOS compatible inputs
• Internal clamp diodes
• Isolat ed sources for external c urrent sensi ng
• Over- and under-voltage detect ion with hysteresis
P-TO263-15-1
Semiconductor Group 10 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VSVUVOFF 36 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 43 V
Output current IQ–30 30 A
Junction temperature Tj– 40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––50µAVS = 13.2 V
RDSON; High-Side-Switch RDSONH –3575mΩ–
RDSON; Low-Side-Switch RDSONL –1535mΩ–
Short circuit output current ISCP 28 – 54 A 25 °C<Tj
<85°C
Pull-down resistance RO1,2 4–30kΩ–
Undervolt. switch ON
voltage VUVON ––7VVS increasing
Undervolt. switch OFF
voltage VUVOFF 3.5 – – V VS decreasing
BTS 780
Semiconductor Group 11 Short Description 1998-02-01
Dual Power Operational Amplifier TCA 2465
Block Diagram
SMD = Surface Mounted Device
1) Maximu m Output Current IQ=1.4A
Type Ordering Code Package
TCA 2465 Q67000-A810 9 P-SIP-9 -1
TCA 2465 G1) Q67006-A8334 P-DSO-20-6
AEB02375
-Short circuit
-Overtemperature
Selfprotection
DC Full Bridge Driver
ESD
Protection
Inhibit
Features
• 2 A dual power operational
amplifier
• Wide operating range from
6 to 40 V
• Over temperature protection
• Short circuit protection to + VS
and GND
• Free wheeling diodes
• Inhibit enables tristate outputs
P-SIP-9-1 P-DSO-20-6
Semiconductor Group 12 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS640V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–42V
Output current IQ–2.5 2.5 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Saturation voltage VQsat – – 3.2 V in path
High slew rate SR –2–V/µs–
Fully protected outputs– ––––DC short-
circuit proof
TCA 2465
Semiconductor Group 13 Short Description 1998-02-01
2-Phase Stepper-Motor Driver TCA 3727
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TCA 3727 Q67000-A830 2 P -DIP-20 - 6
TCA 3727 G Q67006-A8335 P-DSO-24-3
AEB02376
-Chopper Control
-Overtemperature
Selfprotection
Dual Phase
Control Input
ESD
Protection
Inhibit Stepper Motor Driver
C Compatible
µ
Features
•2×0.75 A dual phase stepper
motor driver full, half, quarter,
mini, quasi-sine step
• Integrated driver, control logic and
current control
• Wide operating range from
5 to 50 V
• Wide temperature range
• Over temperature protection
• Inhibit
• Low standby-current
• Free wheeling diodes
P-DIP-20-6 P-DSO-24-3
Semiconductor Group 14 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS550V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–52V
Output current IQ–2×1A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS–0.20.5mA–
Saturation voltage VQsat – 1.4 1.9 V total
Logic supply voltage VL–4.56.5V–
Standby output threshold Vinh
(L→H) –34V
VL=5V
Standby output threshold Vinh
(H→L) –2.32.9VVL=5V
Hysteresis Vinhhy −0.7 1.1 V VL=5V
TCA 3727
Semiconductor Group 15 Short Description 1998-02-01
2-A DC Motor Driver TLE 4202 B
Block Diagram
Type Ordering Code Package
TLE 4202 B Q67000-A8225 P-TO220-7-1
AEB02377
-Short circuit
-Overtemperature
Selfprotection
DC Full Bridge Driver
ESD
Protection
Features
• 2 A full bridge driver
• Wide operating range from 3.5 to 17 V
• Wide temperature range
• Over temperature protection
• Short circuit protection to GND
• Free wheeling diodes
• Low saturation voltage
P-TO220-7-1
Semiconductor Group 16 Short Description 1998-02-01
The two power compa rators can switch ma gnet s, motors or oth er loads eith er by being
sepersted from each other or being combined to a full-bridge circuit.
The IC contains two amplifers featuring a typical open-loop voltage gain of 80 dB at
500 Hz.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS3.5 17 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–40V
Output current IQ–2.5A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS– 1525mA–
Saturation voltage VQsat ––2.5Vtotal
Short circuit current ISC – 1.25 1.6 A VQ=0V
Switch-ON delay tON –3–µs–
Switch-OFF delay tOFF –1.5–µs–
TLE 4202 B
Semiconductor Group 17 Short Description 1998-02-01
4-A DC Motor Driver TLE 4203
Block Diagram
Type Ordering Code Package
TLE 4203 Q67000-A8121 P-TO220-7-1
TLE 4203 S Q67000-A9101 P-TO220-7-2
AEB02378
DC Full Bridge Driver
ESD
Protection Undervoltage
-Short circuit
Selfprotection
-Overtemperature
Features
• 4 A full bridge driver
• Final push-pull stage free of
cross-over currents
• Wide temperature range
• Over temperature protection
• Short circuit protection to + VS
and GND
• Free wheeling diodes
• Undervoltage protection
P-TO220-7-1 P-TO220-7-2
Semiconductor Group 18 Short Description 1998-02-01
The TLE 4203 is a versatile double power driver of up to 4 A output current which is
particularly suitable as a driver for DC motors in reversible operation. The push-pull
power output stage operates in the switching mode and can be combined to a full-bridge
configuration.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS520V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–45V
Output current IQ–4A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS– 2025mA–
Saturation voltage VQsat ––2.5Vtotal
Short circuit current ISC –33.8A–
TLE 4203
Semiconductor Group 19 Short Description 1998-02-01
1-A DC Motor Driver TLE 4205
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 4205 Q67000-A9025 P-DIP-18-3
TLE 4205 G Q67006-A9114 P-DSO-20-6
AEB02379
-Short circuit
-Overtemperature
Selfprotection
DC Full Bridge Driver
ESD
Protection
Inhibit
Features
• 1 A full bridge driver
• Wide operating range from
6 to 32 V
• Over temperature protection
• Short circuit protection to GND
• Free wheeling diodes
• Inhibit
• ESD protected inputs
P-DIP-18-3 P-DSO-20-6
Semiconductor Group 20 Short Description 1998-02-01
The circuit contains two power comparators that can be combined to a full-bridge circuit.
The TLE 4205 is particularly suitable as a driver for DC motors in reversible operation.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS632V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–45V
Output current IQ–1 1 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS–10100µAinhibit
Saturation voltage VQsat ––1.9Vtotal
Inhibit volt age V9–15 – +VSV–
Switch-ON delay tON –1020µs–
Switch-OFF delay tOFF –1020µs–
TLE 4205
Semiconductor Group 21 Short Description 1998-02-01
1-A DC Motor Driver for Servo Driver Applications TLE 4206
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 4206 Q67000-A9303 P-DIP-16-5
TLE 4206 G Q67006-A9299 P-DSO-14-4
AEB02380
-Short circuit
-Overtemperature
Selfprotection
Servo Driver H-Bridge
ESD
Protection
Reference
-Over-Under Volt.
Error Detection
Feedback
Features
• 0.8 A servo motor driver
• Very low stand by current
consumption
• Low saturation voltage
• Full short circuit protected outputs
• Overtemperature protection with
diagnosis
• Over- and under-vol tage lockout
• Error flag diagnosis
• Enhanced power P-DSO package
P-DIP-16-5 P-DSO-14-4
Semiconductor Group 22 Short Description 1998-02-01
The circuit contains one power full bridges for servo driver optimized control inputs.
The TLE 4206 G is particularly suitable as a driver for DC motors in reversible operation.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS718V
Logic input voltages VIN –2 18 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 45 V
Output current IQ–1 1 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS–2050µAinhibit
Saturation voltage VQsat – 1.2 1.7 V total 0.4 A
0 V Swit ch OFF volt age V0VOFF –20.224V–
0 V Switch ON voltage V0VON 18 19.5 – V –
TLE 4206
Semiconductor Group 23 Short Description 1998-02-01
1-A Dual-HBD (Dual-Half-Bridge Driver) TLE 4207
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 4207 G Q67006-A9275 P-DSO-14-4
TLE 4207 GL on request P-DSO-20-6
AEB02381
-Short circuit
-Overtemperature
Selfprotection
Dual Half Bridge Driver
ESD
Protection
Inhibit
-Over-Under Volt.
Error Detection
Features
• 0.8 A dual half bridge driver
• Very low stand by current
consumption
• Very low saturation vol tage
• Full short circuit protected outputs
• Overtemperature protection with
diagnosis
• Over- and under-vol tage lockout
• Error flag diagnosis
• Enhanced power P-DSO package
P-DSO-14-4 P-DSO-20-6
Semiconductor Group 24 Short Description 1998-02-01
The circuit contains two power half bridges which can be combined to a full-bridge circuit.
The TLE 4207G is particularly suitable as a driver for DC motors in reversible operation.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS718V
Logic input voltages VIN –2 18 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 45 V
Output current IQ–1 1 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS–2050µAinhibit
Saturation voltage VQsat – 1.2 1.7 V total 0.4 A
0 V Swit ch OFF volt age V0VOFF –20.224V–
0 V Switch ON voltage V0VON 18 19.5 – V –
TLE 4207
Semiconductor Group 25 Short Description 1998-02-01
1-A Quad-HBD (Quad-Half-Bridge Driver) TLE 4208
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 4208 G on request P-DSO-28-6
AEB02382
-Short circuit
-Overtemperature
Selfprotection
Quad Half Bridge Driver
ESD
Protection
Inhibit
-Over-Under Volt.
Error detection
Features
• 0.8 A quad half bridge driver
• Very low stand by current consumption
• Very low saturation vol tage
• Full short circuit protected outputs
• Overtemperature protection with diagnosis
• Over- and under-vol tage lockout
• Error flag diagnosis
• Enhanc ed power P-DSO pac kag e
P-DSO-28-6
Semiconductor Group 26 Short Description 1998-02-01
The circuit contains four power half bridges which can be combined to two full-bridge
circuits.
The TLE 4208 G is particularly suitable as a driver for DC motors in reversible operation.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS718V
Logic input voltages VIN –2 18 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 45 V
Output current IQ–1 1 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS–2050µAinhibit
Saturation voltage VQsat – 1.2 1.7 V total 0.4 A
Switch-ON delay V0VON 18 19.5 – V –
Switch-OFF delay V0VOFF –20.224V–
TLE 4208
Semiconductor Group 27 Short Description 1998-02-01
2-Phase Stepper-Motor Driver TLE 4726
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 4726 G Q67006-A9297 P-DSO-24-3
AEB02383
-Chopper control
-Overtemperature
Selfprotection
Dual Phase
Control Input
ESD
Protection
Inhibit Stepper Motor Driver
µ
C Compatible
Features
•2×0.75 A dual phase stepper motor driver full, half,
quarter, mini, quasi-sine step
• Integrated driver, control logic and current control
• Wide operating range from 5 to 50 V
• Wide temperature range
• Over temperature protection
• Inhibit
• Low standby-current
• Free wheeling diodes
P-DSO-24-3
Semiconductor Group 28 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS550V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–52V
Output current IQ–2×0.8 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS–0.20.5mA–
Saturation voltage VQsat – 1.4 1.9 V total
Logic supply voltage VL–4.56.5V–
Standby output threshold Vinh
(L→H) –34VVL=5V
Standby output threshold Vinh
(H→L) –2.32.9VVL=5V
Hysteresis Vinhhy –0.71.1VVL=5V
TLE 4726
Semiconductor Group 29 Short Description 1998-02-01
2-Phase Stepper-Motor Driver TLE 4727
Block Diagram
Type Ordering Code Package
TLE 4727 Q67000-A9099 P-DIP-20-3
AEB02384
Dual Phase
Control Input
ESD
Protection
Stepper Motor Driver
-Overtemperature
-Open load
-Overload
Diagnostics
-Overtemperature
Selfprotection
-Overload
-Short circuit
Single Line
Feedback
C Compatible
µ
Features
•2×0.7 A dual phase stepper motor driver
• Wide temperature range
• Short circuit protection to + VS and GND
• Over temperature protection
• 5 V TTL logic supply
• Current control
• Free wheeling diodes
• Low saturation voltage
P-DIP-20-3
Semiconductor Group 30 Short Description 1998-02-01
The TLE 4727 is a bipolar monolithic IC for driving bipolar stepper motors, DC motors
and other inductive loads that operate on constant current. The control logic and power
output stages for two bipolar windings are integrated on a single chip. The direction and
value of current are pro gram mab le for each pha se via sep erate c ontro l inputs. Th e t wo
output stages in full bridge configuration include fast integrated free-wheeling diodes and
are free of crossover current.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS516V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 45 V
Output current IQ2×–1 2×1A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS– 3050mA–
Saturation voltage VQsat – 1.5 1.7 V total
Logic supply voltage VL–4.56V–
Error output VErr ––25Voperating
range
IErr ––1mAoperating
range
Logic input hysteresis VIhy –50–mV–
TLE 4727
Semiconductor Group 31 Short Description 1998-02-01
2-Phase Stepper-Motor Driver TLE 4728
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 4728 G Q67006-A9077 P-DSO-24-3
AEB02385
Dual Phase
Control Input
ESD
Protection
Stepper Motor Driver
-Overtemperature
-Open load
-Short Circuit to GND
Diagnostics
-Overtemperature
Selfprotection
-Overload
-Short circuit
Dual Line
Feedback
-Overload
C Compatible
µ
Features
•2×0.7 A dual phase stepper motor driver
• Wide temperature range
• Short circuit protection to + VS and GND
• Over temperature protection
• Output stages free of cross over current
• Free wheeling diodes
• Low saturation voltage
P-DSO-24-3
Semiconductor Group 32 Short Description 1998-02-01
The TLE 4728 is a bipolar monolithic IC for driving bipolar stepper motors, DC motors
and other inductive loads that operate on constant current. The control logic and power
output stages for two bipolar windings are integrated on a single chip.
The direction and value of current are programmable for each phase via seperate control
inputs. The two output stages in full bridge configuration include fast integrated free-
wheeling diodes and are free of crossover current.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS516V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 45 V
Output current IQ2×–1 2×1A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS– 3050mA–
Saturation voltage VQsat – 1.5 1.7 V total
Logic supply voltage VIxx –5–6Voperating
range
Error output VErr ––25Voperating
range
IErr ––1mAoperating
range
Logic input hysteresis VIhy –50–mV–
TLE 4728
Semiconductor Group 33 Short Description 1998-02-01
2-Phase Stepper-Motor Driver TLE 4729
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 4729 G on request P-DSO-24-3
AEB02386
Dual Phase
Control Input
ESD
Protection
Stepper Motor Driver
-Overtemperature
-Open load
-Short Circuit to GND
Diagnostics
-Overtemperature
Selfprotection
-Overload
-Short circuit
Dual Line
Feedback
-Overload
Inhibit
C Compatible
µ
Features
•2×0.7 A dual phase integrated stepper motor driver
with control logic and current control
• Low quiescent current in INHIBIT mode
• Wide temperature range
• Short circuit protection to + VS and GND
• Over temperature protection
• Output stages free of cross over current
• Free wheeling diodes
• Low saturation voltage
P-DSO-24-3
Semiconductor Group 34 Short Description 1998-02-01
The TLE 4729 is a bipolar monolithic IC for driving bipolar stepper motors, DC motors
and other inductive loads that operate on constant current. The control logic and power
output stages for two bipolar windings are integrated on a single chip.
The direction and value of current are programmable for each phase via seperate control
inputs. The two output stages in full bridge configuration include fast integrated free-
wheeling diodes and are free of crossover current.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS516V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 45 V
Output current IQ2×–1 2×1A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS– 3050mA–
Saturation voltage VQsat – 1.5 1.7 V total
Logic supply voltage VIxx –5–6Voperating
range
Error output VErr ––25Voperating
range
IErr ––1mAoperating
range
Logic input hysteresis VIhy –50–mV–
TLE 4729
Semiconductor Group 35 Short Description 1998-02-01
3-A DC Motor Driver TLE 5203
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 5203 Q67000-A9096 P-TO220-7-1
TLE 5203 G Q67006-A9242 P-TO220-7-8
AEB02387
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
DC Full Bridge Driver
Control Input
ESD
Protection
Feedback
Single Line
µ
C Compatible
Features
• 3 A full H-bridge driver
• Wide operating range from
6 to 40 V
• Over temperature protection
• Overload detection
• Open load detection
• Short circuit protection to + VS
and GND
• Free wheeling diodes
• I/O error diagnostic
•Low
RDSON+
P-TO220-7-1 P-TO220-7-8
Semiconductor Group 36 Short Description 1998-02-01
This motor bridge is optimized for driving DC motors in reversible operation. The internal
protective circuitry in particular ensures that no cross over currents can occur.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS640V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 40 V
Output current IQ–4 4 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––10mA–
RDSON ––0.61.2Ωtotal
Logic input voltage VI1,2 –0.3–7V–
Diagnostic output voltage VEF –0.3–7V–
Pull up/pull down
resistance R5–25kΩ–
Turn-ON delay td1 – – 10 µs–
Turn-OFF delay td2 – – 10 µs–
TLE 5203
Semiconductor Group 37 Short Description 1998-02-01
3-A DC Motor Driver TLE 5204
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 5204 Q67000-A9177 P-TO220-7-1
TLE 5204 G Q67006-A9234 P-TO220-7-8
AEB02388
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
DC Full Bridge Driver
Control Input
ESD
Protection
Feedback
Single Line
µ
C Compatible
Features
• 3 A full H-bridge driver
• Wide operating range from
6 to 40 V
• Break Lo w and break High
• Over temperature protection
• Overload detection
• Open load detection
• Short circuit protection to + VS
and GND
• Free wheeling diodes
• I/O error diagnostic
•Low
RDSON
P-TO220-7-1 P-TO220-7-8
Semiconductor Group 38 Short Description 1998-02-01
This motor bridge is optimized for driving DC motors in reversible operation. The internal
protective circuitry in particular ensures that no cross over currents can occur.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS640V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 40 V
Output current IQ–4 4 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––10mA–
RDSON ––0.61.2Ωtotal
Logic input voltage VI1,2 –0.3–7V–
Diagnostic output voltage VEF –0.3–7V–
Pull up/pull down
resistance R5–25kΩ–
Turn-ON delay td1 – – 10 µs–
Turn-OFF delay td2 – – 10 µs–
TLE 5204
Semiconductor Group 39 Short Description 1998-02-01
5-A H-Bridge for DC-Motor Applications TLE 5205-2
Preliminary Data
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 5205-2 Q67000-A9283 P-TO220-7-11
TLE 5205-2S Q67000-A9324 P-TO220-7-12
TLE 5205-2G Q67006-A9325 P-TO263-7-1
TLE 5205-2GP Q67006-A9237 P-DSO-20-10
AEB02389
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
DC Full Bridge Driver
Control Input
µ
C Compatible
ESD
Protection
Feedback
Single Line
P-TO263-7-1
Features
• 5.0 A full H-bridge driver
• Wide operating range from
6 to 40 V
• Over temperature protection
• Overload detection
• Open load detection
• Open load diagnosis
• Full short circuit protection
• Integrated free wheeling diodes
• I/O error diagnostic
•Low
RDSON typ. 200 mΩ @ 25 °C
P-TO220-7-11 P-TO220-7-12
P-DSO-20-10
Semiconductor Group 40 Short Description 1998-02-01
This motor bridge is optimized for driving DC motors in reversible operation. The internal
protective circuitry in particular ensures that no cross over currents can occur.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS640V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 40 V
Output current IQ–6 6 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––10mA–
RDSON – ––1.3Ωtotal
Tj=150°C
Logic input voltage VI1,2 –0.3–7V–
Diagnostic output voltage VEF –0.3–7V–
Turn-ON delay td1 – – 20 µs–
Turn-OFF delay td2 – – 20 µs–
TLE 5205-2
Semiconductor Group 41 Short Description 1998-02-01
5-A H-Bridge for DC-Motor Applications TLE 5206-2
Preliminary Data
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 5206-2 Q67000-A9290 P-TO220-7-11
TLE 5206-2S Q67000-A9326 P-TO220-7-12
TLE 5206-2G Q67006-A9323 P-TO263-7-1
TLE 5206-2GP Q67006-A9239 P-DSO-20-10
AEB02390
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
DC Full Bridge Driver
Control Input
ESD
Protection
Feedback
Single Line
µ
C Compatible
Features
• 5.0 A full H-bridge driver
• Wide operating range from
6 to 40 V
• Break Lo w and break High
• Over temperature protection
• Overload detection
• Full short circuit protection
• Integrated free wheeling diodes
• I/O error diagnostic
•Low
RDSON typ. 200 mΩ @ 25 °C
P-TO220-7-11 P-TO220-7-12
P-DSO-20-10
P-TO263-7-1
Semiconductor Group 42 Short Description 1998-02-01
This motor bridge is optimized for driving DC motors in reversible operation. The internal
protective circuitry in particular ensures that no cross over currents can occur.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS640V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 40 V
Output current IQ–6 6 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––10mA–
RDSON – ––1.3Ωtotal
Tj=150°C
Logic input voltage VI1,2 –0.3–7V–
Diagnostic output voltage VEF –0.3–7V–
Turn-ON delay td1 – – 20 µs–
Turn-OFF delay td2 – – 20 µs–
TLE 5206-2
Semiconductor Group 43 Short Description 1998-02-01
6-A DC Motor Driver with Inhibit TLE 5207
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 5207 Q67000-A9295 P-TO220-7-1
TLE 5207 G Q67006-A9296 P-TO220-7-8
AEB02391
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
DC Full Bridge Driver
Control Input
ESD
Protection
Feedback
Single Line
µ
C Compatible
Features
• 6 A full bridge driver
• Wide operating range from
6 to 40 V
• Over temperature protection
• Low quiescent current
• Overload detection
• Short circuit protection to + VS
and GND
• Free wheeling diodes
• I/O error diagnostic
•Low
RDSON
P-TO220-7-1 P-TO220-7-8
Semiconductor Group 44 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS640V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 40 V
Output current IQ–6 6 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––100µAVS=12V
stand by mode
RDSON ––0.61.2Ωtotal
Logic input voltage VI1,2 –0.3–6VVS=0-40V
Diagnostic output voltage VEF –0.3 – 40 V –
Pull up/pull down
resistance R5–25kΩ–
Turn-ON delay td1 – – 20 µs–
Turn-OFF delay td2 – – 20 µs–
TLE 5207
Semiconductor Group 45 Short Description 1998-02-01
Hex-Half-Bridge / Double Six-Driver TLE 5208-6
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 5208-6 G Q67007-A9282 P-DSO-28-6
AEB02392
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
12 Fold Output Driver
SPI Control
ESD
Protection
C Compatible
µ
Features
• Multifunctional 6 fold 1.0 A half bridge driver for
motors, inductive loads and lamps
•RDSON typ. 1.0 Ω @ 25 °C
• Individual configurable with 16 bit SPI
• Full diagnostic with 16 bit SPI
• Wide operating range from 6 to 32 V
• Over temperature protection with prewarning
• Very low quiescent curr ent
• Overload detection (maskable)
• Open load and under load detection
• Over- and under voltag e lock out
• Full short circuit protected
• Free wheeling diodes
P-DSO-28-6
Semiconductor Group 46 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VSVUV OFF 40 V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 40 V
Output current
(overload detection activ) IQ–2 2 A
Output current
(overload detection not activ) IQ–5 5 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––50µA stand-by
mode
RDSON –1.02.5Ω–
SPI clock frequency fCLK ––2.0MHz–
Setup delay time tset d ––300µs stand-by to
activ
Output delay time source – – 5 20 µs–
Output delay time sink – – 7 30 µs–
Thermal prewarning – 120 145 170 °C–
Thermal shutdown – 150 175 200 °C–
Thermal switch on – 120 – 170 °C after thermal
shutdown
TLE 5208-6
Semiconductor Group 47 Short Description 1998-02-01
High Performance Smar t Power TLE 5250
Stepper Motor Driver with
Diagnostic Interfac e
Block Diagram
Type Ordering Code Package
TLE 5250 Q67000-A9103 P-SIP-15-1
AEB02393
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open load
-Short circuit
-Overload
-Overtemperature
Selfprotection
Single Phase
TTL Input
ESD
Protection
Feedback
Serial Diagnostic Interface
-Undervoltage shutdown
Stepper Motor Driver
µ
C Compatible
Features
•1×2.5 A single phase stepper motor driver
• Fast nominal/actual comparator for
micro stepp er mode
• Short circuit protection to + VS and GND
• Over temperature protection
• Undervoltage shutdown
• Dynamic current control
• Free wheeling diodes
• Serial 16-Bit diagnostic interface
P-SIP-15-1
Semiconductor Group 48 Short Description 1998-02-01
The TLE 5250 has TTL-compatible logic inputs, includes a H-bridge with integrated fast
free-wheelin g diodes plus dy namic limiting of the moto r current by chop per mode. The
nominal current can be set continuously by a control voltage. Microstep mode can be
produced by applying a sinoidal control voltage.
Two TLE 5250 with a minimum of ex ternal circuitry and a si ngle supply voltage form a
complete system that can be driven direct by a µC for two-phase bipolar stepping motors
with output current of up to 2.5 A per phase.
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS640V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 45 V
Output current IQ03A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Supply current IS––11mA–
RDSON – – 0.35 0.6 Ωtotal
Logic input VI– 0.3 – 5.5 V operating
range
Output current IQ– 2.5 – 2.5 A operating
range
RC/Sync, frequency f–20100kHz–
TLE 5250
Semiconductor Group 49 Short Description 1998-02-01
Triple-Half-Bridge Driver TLE 6208-3
Target Data
Block Diagram
SMD = Surface Mounted Device
Type Ordering Code Package
TLE 6208-3 G on request P-DSO-14-4
AEB02433
Diagnostics
-Overtemperature
-Overload
-Short circuit
-Open circuit
-Short circuit
-Overload
-Overtemperature
Selfprotection
6 Fold Output Driver
SPI Control
ESD
Protection
µ
C Compatible
Features
• Multifunctional 3 fold 1.0 A half bridge driver for motors,
inductive loads and lamps
•RDSON typ. 0.8 Ω@25°C
• Individual configurable with 16 bit SPI
• Full diagnostic with 16 bit SPI
• Wide operating range from 6 to 32 V
• Over temperature protection with prewarning
• Very low quiescent curr ent
• Overload detection (maskable)
• Open load and under load detection
• Over- and under voltag e lock out
• Full short circuit protected
• Free wheeling diodes
P-DSO-14-4
Semiconductor Group 50 Short Description 1998-02-01
Operating Range
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS632V
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit
min. max.
Supply voltage VS–0.3 40 V
Output current
(overload detection activ) IQ–2 2 A
Output current
(overload detection not activ) IQ–5 5 A
Junction temperature Tj–40 150 °C
Electrical Characteristics
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Quiescent current IS––50µA stand-by
mode
RDSON ––0.82.5Ω–
SPI clock frequency – ––2MHz–
Setup delay time – – – 300 µs stand-by to
activ
Output dela y time sou rce ––520µs–
Output dela y time sin k – – 7 30 µs–
Thermal prewarning – 120 145 170 °C–
Thermal shutdown – 150 175 200 °C–
TLE 6208-3
