Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA
– EEE-2 –
33
ZAE
Capacitance (μF)
Rated Voltage Mark
Series identification
Lot number
Negative polarity marking (–)
A±0.2
W
( ) Reference size
L
0D±0.5
H
B±0.2
(I)
K
(P) (I)
+
–
0.3 max.
Pressure Relief (010 and larger)
■ Features
● Endurance: 10000 h at 105 °C
● Low ESR and High ripple current
(70 % over, Lower ESR than Current V-FP)
● High voltage (to 80 V)
● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
(There are little characteristics change by temperature and frequency)
● Vibration-proof product is available upon request. (08 mm and larger)
● AEC-Q200 qualifi ed✽
● RoHS directive compliant
Surface Mount Type
Series: ZA Type: V
High temperature Lead-Free re ow
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated Voltage Range 25 V.DC to 80 V.DC
Nominal Cap.Range 10 μF to 330 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater)
tan dPlease see the attached Standard Products list
Endurance
The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +105 °C for 10000
hours. After stabilizing at room temperature(+15 to 35 °C), the capacitor shall not exceed the specifi ed limits.
(The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.)
Capacitance change ±30 % of initial measured value
tan d< 200 % of initial specifi ed value
E. S. R. < 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
ESR after Endurance
(Ω/100 kHz) (–40 °C)
Size Code
CDD8FG
2.0 1.4 0.8 0.4 0.3
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Damp Heat (Load)
After applying rated working voltage for 2000 hours at +85 °C±2 °C / 85% to 90%RH and then being stabilized
at +20 °C, Capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value
tan d< 200 % of initial specifi ed value
E. S. R. < 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan d< initial specifi ed value
DC leakage current < initial specifi ed value
■ Di men sions in mm (not to scale)■ Marking
Example:25 V 33 μF Marking color : BLACK
Rated Voltage Mark
Size
code D L A, B H I W P K
C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
- 0.20
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
- 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
+ 0.15
+ 0.15
+ 0.15
E 25 V
V 35 V
H 50 V
J 63 V
K 80 V
(Unit : mm)
✽ This product qualify for AEC-Q200, but it has some deviations.
04 Mar. 2015
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA
– EEE-3 –
■ Frequency correction factor for ripple current
■ Standard Products
· Please refer to the page of “Refl ow Profi le” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”.
Endurance : 105 °C 10000 h
R.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length Size
Code
Ripple
Current
(100 kHz)
(+105 °C)
E.S.R.
(100 kHz)
(+20 °C)
tan d
(120 Hz)
(+20 °C)
Taping
(V) (μF) (mm) (mm)
(mA r.m.s.)
(
m
Ω)(pcs)
25
33 5 5.8 C 900 80 0.14 EEHZA1E330R (5) 1000
56 6.3 5.8 D 1300 50 0.14 EEHZA1E560P (5) 1000
100 6.3 7.7 D8 2000 30 0.14 EEHZA1E101XP (5) 900
220 8 10.2 F 2300 27 0.14 EEHZA1E221P (6) 500
330 10 10.2 G 2500 20 0.14 EEHZA1E331P (6) 500
35
22 5 5.8 C 900 100 0.12 EEHZA1V220R (5) 1000
27 6.3 5.8 D 1300 60 0.12 EEHZA1V270P (5) 1000
47 6.3 5.8 D 1300 60 0.12 EEHZA1V470P (5) 1000
68 6.3 7.7 D8 2000 35 0.12 EEHZA1V680XP (5) 900
150 8 10.2 F 2300 27 0.12 EEHZA1V151P (6) 500
270 10 10.2 G 2500 20 0.12 EEHZA1V271P (6) 500
50
10 5 5.8 C 750 120 0.10 EEHZA1H100R (5) 1000
22 6.3 5.8 D 1100 80 0.10 EEHZA1H220P (5) 1000
33 6.3 7.7 D8 1600 40 0.10 EEHZA1H330XP (5) 900
68 8 10.2 F 1800 30 0.10 EEHZA1H680P (6) 500
100 10 10.2 G 2000 28 0.10 EEHZA1H101P (6) 500
63
10 6.3 5.8 D 1000 120 0.08 EEHZA1J100P (5) 1000
22 6.3 7.7 D8 1500 80 0.08 EEHZA1J220XP (5) 900
33 8 10.2 F 1700 40 0.08 EEHZA1J330P (6) 500
56 10 10.2 G 1800 30 0.08 EEHZA1J560P (6) 500
80 22 8 10.2 F 1550 45 0.08 EEHZA1K220P (6) 500
33 10 10.2 G 1700 36 0.08 EEHZA1K330P (6) 500
Capacitance
(μF)
Frequency
(kHz)
0.10.120.20.30.512351015203040501003005001000
C < 47
Correction
factor
0.10 0.10 0.10 0.15 0.20 0.30 0.40 0.45 0.50 0.60 0.65 0.70 0.75 0.80 0.85 1.00 1.00 1.05 1.05
47 < C < 150
0.15 0.15 0.20 0.25 0.30 0.40 0.45 0.55 0.60 0.70 0.75 0.80 0.80 0.85 0.90 1.00 1.00 1.00 1.00
150 < C
0.15 0.15 0.25 0.25 0.30 0.45 0.50 0.60 0.65 0.75 0.80 0.85 0.85 0.85 0.90 1.00 1.00 1.00 1.00
04 Mar. 2015
