LBA120 Dual Single-Pole OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Ratings 250 170 20 Units VP mArms / mADC Features * 3750Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * High Reliability * Arc-Free With No Snubbing Circuits * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Small 8-Pin Package * Machine Insertable, Wave Solderable * Surface Mount, Tape & Reel Versions Available Description LBA120 comprises two independent 250V, 170mA, 20 solid state relays: one single-pole, normally open (1-Form-A) relay and one single-pole, normally closed (1-Form-B) relay. Featuring low on-resistance combined with enhanced peak load current handling capabilities, LBA120 is designed to provide an ideal solution where a complementary Form-A/Form-B relay pair is required. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component TUV Certificate B 09 07 49410 004 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # LBA120 LBA120S LBA120STR LBA120P LBA120PTR Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1,000/Reel) 8-Pin Flat Pack (50/Tube) 8-Pin Flat Pack (1,000/Reel) Pin Configuration AC/DC Configuration + Control - Normally Closed - Control - Normally Closed + Control - Normally Open - Control - Normally Open 1 8 2 7 3 6 4 5 Switching Characteristics of Normally Open Devices Switching Characteristics of Normally Closed Devices IF IF ILOAD 90% ILOAD ton DS-LBA120-R07 Normally Open Pole Form-B Form-A Pb Normally Closed Pole 90% 10% 10% toff toff ton e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LBA120 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Derate linearly 1.33 mW / C Derate linearly 6.67 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 1 2 Conditions Symbol Min Typ Max Units t = 10ms IL=170mA VL=250VP IL ILPK RON ILEAK - 16 - 170 400 20 1 mArms / mADC mAP VL=50V, f=1MHz ton toff COUT - 50 5 5 - IL=120mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V A ms pF If both poles operate, then the load current must be derated so as not to exceed the package power dissipation value. www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION LBA120 Form-A/Form-B PERFORMANCE DATA @25C (Unless Otherwise Noted)* Typical LED Forward Voltage Drop vs. Temperature Typical LED Forward Voltage Drop (N=50, IF=5mA) LED Forward Voltage Drop (V) 35 Device Count (N) 30 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.8 1.6 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.8 -40 1.25 -20 0 20 40 60 80 100 120 Temperature (C) LED Forward Voltage Drop (V) Form-A RELAY PERFORMANCE DATA @25C (Unless Otherwise Noted)* 25 20 20 15 10 5 0 0.90 1.14 1.38 1.62 Form-A Typical On-Resistance Distribution (N=50, IF=5mA, IL=170mADC) 30 15 10 5 1.86 25 20 15 10 5 0 0.08 0.16 0.24 0.32 0.40 8.45 0.23 8.75 9.05 9.35 9.65 9.95 10.25 Turn-On Time (ms) Turn-Off Time (ms) On-Resistance (:) Form-A Typical IF for Switch Operation (N=50, IL=170mADC) Form-A Typical IF for Switch Dropout (N=50, IL=170mADC) Form-A Typical Blocking Voltage Distribution (N=50) 15 10 5 35 30 20 Device Count (N) 20 25 Device Count (N) Device Count (N) 35 0 0.66 25 Form-A Typical Turn-Off Time (N=50, IF=5mA, IL=170mADC) Device Count (N) 25 Device Count (N) Device Count (N) Form-A Typical Turn-On Time (N=50, IF=5mA, IL=170mADC) 15 10 5 25 20 15 10 5 0 0 0.1 0.3 0.5 0.7 0.9 LED Current (mA) 1.1 1.3 0 0.1 0.3 0.5 0.7 0.9 LED Current (mA) 1.1 1.3 330 340 350 360 370 380 390 Blocking Voltage (VP) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R07 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LBA120 Form-A PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-A Typical Turn-On Time vs. LED Forward Current (IL=170mADC) 0.42 1.0 0.8 0.6 0.40 0.39 0.38 0.37 0.2 0.36 5 10 15 20 25 30 35 40 45 0.6 0.4 5 10 15 20 25 30 35 40 45 -40 50 -20 0 20 40 60 Temperature (C) Form-A Typical IF for Switch Dropout vs. Temperature (IL=170mADC) Form-A Typical Turn-On Time vs. Temperature (IL=170mADC) Form-A Typical Turn-Off Time vs. Temperature (IF=5mA, IL=170mADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-On Time (ms) LED Current (mA) 0.8 LED Forward Current (mA) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -20 0 20 40 60 80 100 0.8 IF=5mA IF=10mA IF=20mA 80 100 0.6 0.5 0.4 0.3 0.2 0 -20 0 20 40 60 80 -40 100 -20 0 20 40 60 Temperature (C) Temperature (C) Form-A Typical Load Current vs. Load Voltage (IF=5mA) Form-A Maximum Load Current vs. Temperature 200 60 100 0.1 -40 Form-A Typical On-Resistance vs. Temperature (IF=5mA, IL=170mADC) 80 0.7 Temperature (C) 250 50 40 30 20 10 Load Current (mA) 150 Load Current (mA) 100 50 0 -50 -100 200 IF=20mA IF=10mA IF=5mA 150 100 50 -150 -200 -2.5 -2.0 -1.5 -1.0 -0.5 0 -40 -20 0 20 40 60 80 100 0 0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 Temperature (C) Load Voltage (V) Temperature (C) Form-A Typical Blocking Voltage vs. Temperature Form-A Typical Leakage vs. Temperature Measured across Pins 5&6 Form-A Energy Rating Curve Leakage (PA) 375 370 365 360 355 350 345 340 335 330 325 0.035 1.2 0.030 1.0 Load Current (A) On-Resistance (:) 1.0 LED Forward Current (mA) 1.6 Blocking Voltage (VP) 1.2 0 0 50 1.8 -40 1.4 0.2 Turn-Off TIme (ms) 0 1.6 0.41 0.4 Form-A Typical IF for Switch Operation vs. Temperature (IL=170mADC) 1.8 LED Current (mA) 1.2 Turn-Off Time (ms) Turn-On Time (ms) 1.4 Form-A Typical Turn-Off Time vs. LED Forward Current (IL=170mADC) 0.025 0.020 0.015 0.010 -40 -20 0 20 40 Temperature (C) 60 80 100 120 0.8 0.6 0.4 0.2 0.005 0 -40 100 -20 0 20 40 60 Temperature (C) 80 100 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION LBA120 Form-B PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-B Typical Turn-On Time (N=50, IF=5mA, IL=170mADC) 30 30 30 15 10 20 15 10 5 5 0 0 0.04 0.12 0.20 0.28 0.36 Device Count (N) 20 10 0 0.75 1.25 1.75 2.25 2.75 9.25 10.15 11.05 11.95 12.85 13.75 14.65 3.25 Turn-On Time (ms) Turn-Off Time (ms) On-Resistance (:) Form-B Typical IF for Switch Operation (N=50, IL=170mADC) Form-B Typical IF for Switch Dropout (N=50, IL=170mADC) Form-B Typical Blocking Voltage Distribution (N=50) 25 20 25 20 15 10 Device Count (N) 30 Device Count (N) 25 15 10 5 0.24 0.8 0.32 0.40 0.56 0.48 0.24 0.32 0.40 0.48 0.56 0.64 263 280 297 314 331 348 365 LED Current (mA) Blocking Voltage (VP) Form-B Typical Turn-On Time vs. LED Forward Current (IL=170mADC) FormB Typical Turn-Off Time vs. LED Forward Current (IL=170mADC) FormB Typical IF for Switch Operation vs. Temperature (IL=170mADC) 2.0 3.0 0.2 2.5 LED Current (mA) Turn-Off Time (ms) 0.4 1.6 1.4 1.2 1.0 0.6 10 15 20 25 30 35 40 45 1.5 1.0 0 0 50 2.0 0.5 0.8 0 5 10 15 20 25 30 35 40 45 -40 50 -20 0 20 40 60 80 LED Forward Current (mA) LED Forward Current (mA) Temperature (C) Form-B Typical IF for Switch Dropout vs. Temperature (IL=170mADC) Form-B Typical Turn-On Time vs. Temperature (IF=5mA, IL=170mADC) Form-B Typical Turn-Off Time vs. Temperature (IF=170mADC) 0.40 3.5 0.35 2.0 1.5 1.0 0.5 0.30 0.25 0.20 0.15 0.10 0 20 40 60 Temperature (C) 80 100 2.0 1.5 IF=5mA IF=10mA IF=20mA 1.0 0 0 -20 2.5 0.5 0.05 0 100 3.0 Turn-Off Time (ms) Turn-On Time (ms) 2.5 -40 10 LED Current (mA) 0.6 3.0 15 0 0.16 0.64 1.8 5 20 5 0 0 Turn-On Time (ms) 15 5 0.44 5 LED Current (mA) 20 30 0 Form-B Typical On-Resistance Distribution (N=50, IF=5mA, IL=170mADC) 25 25 Device Count (N) Device Count (N) 25 Device Count (N) Form-B Typical Turn-Off Time (N=50, IF=5mA, IL=170mADC) -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R07 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LBA120 Form-B PERFORMANCE DATA @25C (Unless Otherwise Noted)* 200 250 30 20 Load Current (mA) 40 10 100 50 0 -50 -100 200 150 100 50 -150 -200 -2.5 -2.0 -1.5 -1.0 -0.5 0 -40 -20 0 20 40 60 80 100 0 0 -40 0.5 1.0 1.5 2.0 2.5 -20 0 20 40 60 80 Temperature (C) Load Voltage (V) Temperature (C) Form-B Typical Blocking Voltage vs. Temperature Form-B Typical Leakage vs. Temperature Measured across Pins 7&8 Form-B Energy Rating Curve 0.035 1.2 0.030 1.0 Load Current (A) 325 320 315 310 305 300 295 290 285 280 275 Leakage (PA) Blocking Voltage (VP) Form-B Maximum Load Current vs. Temperature (IF=0mA) Form-B Typical Load Current vs. Load Voltage (IF=5mA) 150 50 Load Current (mA) On-Resistance (:) 60 Form-B Typical On-Resistance vs. Temperature (IF=5mA, IL=170mADC) 0.025 0.020 0.015 0.010 -20 0 20 40 Temperature (C) 60 80 100 0 -40 120 10s 100s 0.8 0.6 0.4 0.2 0.005 -40 100 -20 0 20 40 60 Temperature (C) 80 100 0 10Ps 100Ps 1ms 10ms 100ms 1s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 6 www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION LBA120 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LBA120 / LBA120S / LBA120P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LBA120 / LBA120S 250C for 30 seconds LBA120P 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R07 e3 www.ixysic.com 7 INTEGRATED CIRCUITS DIVISION LBA120 MECHANICAL DIMENSIONS LBA120 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) Pin 1 PCB Hole Pattern 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) 0.457 0.076 (0.018 0.003) 7.620 0.127 (0.300 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 7.620 0.127 (0.300 0.005) 0.254 0.0127 (0.010 0.0005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) LBA120S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) Pin 1 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) LBA120P 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 0.127 (0.370 0.005) Pin 1 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 0.203 0.013 (0.008 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 0.025 (0.085 0.001) 0.457 0.076 (0.018 0.003) 0.864 0.120 (0.034 0.004) 8 PCB Land Pattern Dimensions mm (inches) www.ixysic.com R07 INTEGRATED CIRCUITS DIVISION LBA120 MECHANICAL DIMENSIONS LBA120STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W=16.00 (0.63) Bo=10.30 (0.406) K0 =4.90 (0.193) Ao=10.30 (0.406) K1 =4.20 (0.165) Embossed Carrier Embossment P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 LBA120PTR Tape & Reel 2.00 (0.079) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Embossment W = 16.00 (0.63) 7.50 (0.295) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier 4.00 (0.157) Ao = 10.30 (0.406) P = 12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 9 Specification: DS-LBA120-R07 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: LBA120S LBA120P LBA120PTR LBA120STR