QSE-042-01-FTL-D-DP - Samtec Inc.

DO NOT

SCALE FROM

THIS PRINT

.725 18.42

REF

.010 0.25

REF

.055 1.40

.120 3.05

REF

(((No OF POSITIONS / 14) x .7875[20.003])

+ .005[.13])

.003[.08]

"A"

-LC: LOCKING CLIP OPTION SHOWN

T-1G2-01-XXX

LC-08-TM-01

QSE-042-01-XXX-D-DP-LC SHOWN

QSE-20-01-D-XX

FIG 1

SEE NOTE 16

.138 3.52

REF

.285 7.24

REF

.006

REF

0.15

((No OF POSITIONS / 14) x .7875[20.003]) + .0500[1.270] REF

.625 15.88

REF

.032 0.80

REF

.095 2.40

REF

6 EQ. SPACES

x .094 [2.40]

.022 0.57

REF

.788 20.00

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

No OF POSITIONS

-014, -028, -042, **-056, **-070

(PER ROW)

ROW SPECIFICATION

-D: DOUBLE (USE QSE-20-01-D-XX)

OPTION

-A: ALIGNMENT PINS

(USE QSE-20-01-D-XX-A)

-LC: LOCKING CLIPS

(USE LC-08-TM-01)(SEE NOTE 15)

-K: POLYIMIDE FILM

(USE K-DOT-.325-.450-.005, SEE FIG 2, SHT 2)

-TR: TAPE & REEL (42 POS. MAX)

(28 POS. MAX FOR -GP)

-GP: GUIDE POSTS

(USE QSE-20-XX-D-GP, SEE FIG 3, SHT 2)

-RT1: RETENTION (MUST USE -A OPTION)

(USE QSE-20-01-D-XX-A-RT1

& SUB-SC-05-01-FF) (SEE FIG 4, SHT 2)

(NOT AVAILABLE WITH -LC OR -GP)

(NOT AVILABLE IN 056 OR 070 POS)

-L: LATCHING OPTION (40 POS. MAX.)

(SEE FIG 7, SHT 4)

(MUST USE -A OPTION)

(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)

PLATING SPECIFICATION

PLATING THICKNESSES ARE FOR

SIGNAL PINS ONLY. FOR GROUND

PLANE THICKNESSES, SEE PP-T-1G2-XX-X.

(SEE NOTES 7, 12 & 14)

-F: 3µ" SELECTIVE GOLD CONTACT,

MATTE TIN TAIL

(USE C-126-21-F, T-1G2-01-F)

-L: 10µ" SELECTIVE GOLD CONTACT,

MATTE TIN TAIL

(USE C-126-21-L, T-1G2-01-L)

-H: 30µ" GOLD CONTACT, 3µ" GOLD TAIL

(USE C-126-21-H, T-1G2-01-G)

-C: 50µ" ELECTRO POLISHED SELECTIVE

GOLD CONTACT, MATTE TIN TAIL

(USE C-126-21-C, T-1G2-01-L)

-STL: 30µ" SELECTIVE GOLD CONTACT,

TIN LEAD (90/10 ±5%) TAILS

(USE C-126-21-STL, T-1G2-01-STL)

-FTL: 3µ" SELECTIVE GOLD CONTACT,

TIN LEAD

(90/10 ±5%) TAILS

(USE C-126-21-FTL, T-1G2-01-FTL)

-S: 30µ" SELECTIVE GOLD CONTACT,

MATTE TIN TAIL

(USE C-126-21-S, T-1G2-01-L)

LEAD STYLE

-01: .1280 [3.30]

-02: .2460[6.248]

No OF BANKS

BODY STYLE

-DP: DIFFERENTIAL PAIRS

* = NOT TOOLED

** = SEE NOTE 13

PIN COUNT, BANKS 1-5

(SEE NOTES 11, 13 & 14)

-S: STANDARD

-D: DIFFERENTIAL

(SEE NOTE 10 &

FIG 5, SHT 3)

.070

REF

1.77

.295

REF

7.49

.1280

.0010

.0030 3.251

0.025

0.076

(SEE NOTE 5 & 6)

.007 0.18

REF

.038 0.95

SECTION "A"-"A"

C-126-21-XXX

***SEE NOTE 14

SEE TABLE 1

.035

REF

0.89

(((No OF POSITIONS / 14) x .7875[20.003])

+ .005[.13])

.003[.08]

-A: ALIGNMENT PIN OPTION SHOWN

QSE-20-01-D-XX-A

.037 0.95

REF

.038

REF

0.95

(SEE NOTE 11)

SHEET OF

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DECIMALS ANGLES

.XX:

.01 [.25] 2

.XXX:

.005 [.13]

.XXXX:

.0020 [.05]

MATERIAL:

.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY

BY:

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

DEAN P

5/05/2000

SHEET SCALE: 1.375:1

INSULATOR: LCP, COLOR: BLACK, FLAMMABILITY RATING: UL94VO

CONTACT: PHOS BRONZE

GROUND PLANE: PHOS BRONZE

F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW

NOTES:

1. REPRESENTS A CRITICAL DIMENSION.

2. MIN TERMINAL RETENTION: 5 OZ.

3. MIN GROUND PLANE RETENTION: 8 OZ.

4. PARTS TO BE MOLDED TO POSITION.

5. MAX VARIENCE: .002 [0.05].

6. DIMENSION APPLIES TO TERMINALS AND GROUND PLANE.

7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.

8. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAXIMUM

HEIGHT OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE SOCKETS.

9. SUB-SC-05-01-XX RETENTION TO BE 1.0 LBF IN BODY.

10. IF ORDERING ALL BANKS DIFFERENTIAL PAIR, LEAVE BLANK. IF ORDERING ALL

BANKS STANDARD PIN COUNT, ORDER QSE-XXX-XX-X-D-XXX (STANDARD QSE)

11. PIN COUNT PER ROW= (# -DP BANKS X 14) + (# -S BANKS X 20)

12. MAY SUB C-126-01-XXX FOR C-126-21-XXX.

13. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC

INTERCONNECT PROCESSING GROUP.

14. FOR -056, -070 POSITIONS USE C-269-11-XXX. DO NOT SUB C-126.

15. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION

IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

16. SIDE WALLS ARE RIBBED AS NECESSARY TO CONTROL BOW.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

REVISION AI

"R" REF

.325 8.26

"S"

.020 0.51

FIG 2

-K: POLYIMIDE FILM PAD

[USE K-DOT-.325-.450-.005]

NOTE: "R" = ((No OF POSITIONS / 14) x .7875[20.003]) + .050[1.27]

"S" = (("R" - .325[8.26]) / 2)

.020[.51]

.133 3.38

.140

THRU REF

3.56

((No OF POSITIONS/14) x .7875[20.003])

+.4285[10.884] REF

((No OF POSITIONS/14) x .7875[20.003])

+ .225[5.72] REF

.102 2.58

REF

.207

REF

5.26

FIG 3

-GP OPTION

(SAME AS FIG 1, UNLESS OTHERWISE STATED)

AVAILBLE ON LEAD STYLES -01 & -01-A ONLY

(28 POSITION MAX FOR TAPE & REEL PACKAGING)

QSE-20-XX-D-XX-GP

((No OF BANKS x .7875[20.003]) + .650[16.51] REF

((No OF BANKS x .7875[20.003]) + .341[8.66]

.004

.003

"D"

-RT1: RETENTION OPTION

(MUST USE -A OPTION)

(NOT AVAILABLE WITH -LC OR -GP OPTIONS)

(SAME AS FIG 1, UNLESS OTHERWISE STATED)

FIG 4

QSE-20-01-D-XX-A-RT1

[0.08]

[0.10]

.148

REF

3.76

((No OF BANKS x .7875[20.003]) + .341[8.66]

.004

.003

'E'

SECTION "D"-"D"

SCALE 1.5 : 1

SUB-SC-05-01-FF (2 PLCS)

[0.08]

[0.10]

.150 3.81

.045

REF

1.14

DETAIL 'E'

SCALE 3 : 1

SHEET OF

.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY

BY:

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

DEAN P

5/05/2000

SHEET SCALE: 2:1

REVISION AI

F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

QSE-042-01-XXX-D-DP-A-DSD SHOWN

DIFFERENTIAL PAIR BANKS

SINGLE ENDED BANK

FIG 6

QSE-070-01-XXX-D-DP-A-DDDDS

DIFFERENTIAL PAIR BANKS

SINGLE ENDED BANK

FIG 5

SHEET OF

.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY

BY:

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

DEAN P

5/05/2000

SHEET SCALE: 2:1

REVISION AI

F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

.010

REF

0.25 .053

±.002

1.35

±0.051

.160

REF

4.06

((No OF POSITIONS / 20) x .7875[20.003]) + .1715[4.356]

QSE-20-01-D-XX-A-L

WT-56-01-T

.030

REF

0.76

((No OF POSITIONS / 20) x .7875[20.003]) + .2600[6.604] REF

.025

REF

0.64

FIG 7

-L: LATCHING OPTION

(MUST USE -A OPTION)

(SAME AS FIG 1, UNLESS OTHERWISE STATED)

(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)

(MAXIMUM 40 POS)

CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE

ASSEMBLY OPERATION

IN-PROCESS INSPECTION

FILL C-126-21

C1, C2, C3

ADD -RT1 OPTION

C4, C5, C6

ADD -L OPTION

C7, C8, C9

SHEET OF

.8mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY

BY:

QSE-XXX-XX-XXX-D-DP-XXX-XXXXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

DEAN P

5/05/2000

SHEET SCALE: 1.375:1

REVISION AI

F:\DWG\MISC\MKTG\QSE-XXX-XX-XXX-D-DP-XXX-XXXXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322