TLP763J
2007-10-01
1
TOSHIBA Photocoupler GaAs Ired & Photo−Triac
TLP763J
Office Machine
Household Use Equipment
Triac Driver
Solid State Relay
The TOSHIBA TLP763J consists of a GaAs infrared LED optically
coupled to a zero voltage crossing turn-on photo-triac in a 6 lead plastic
DIP.
• Peak off-state voltage: 600 V (Min.)
• Trigger LED current: 10 mA (Max.)
• On-state current: 100 mA (Max.)
• Isolation voltage: 4000Vrms (Min.)
• UL recognized: UL1577, file No. E67349
• BSI approved: BS EN60065: 2002,
Certificate No. 8945
BS EN60950-1: 2002,
Certificate No. 8946
• SEMKO approved: SS EN60065 (EN60065, 1993)
SS EN60950 (EN60950, 1992)
SS EN60335 (EN60335, 1988)
Certificate No. 9522145
• Option (D4) type
VDE approved: DIN EN 60747-5-2
Certificate No. 40009373
Maximum operating insulation voltage : 890 VPk
Highest permissible over voltage : 6000 VPk
(Note) When an EN60747-5-2 approved type is needed,
please designate the “option (D4)”.
7.62mm pich 10.16mm pich
TLP763J type TLP763JF type
• Creepage distance : 7.0mm (Min.) 8.0mm (Min.)
Clearance : 7.0mm (Min.) 8.0mm (Min.)
Internal creepage path : 4.0mm (Min.) 4.0mm (Min.)
Insulation thickness : 0.5mm (Min.) 0.5mm (Min.)
Unit: mm
TOSHIBA 11−7A10
Weight: 0.42g (Typ.)
Pin configuration (top view)
1 : Anode
2 : Cathode
3 : N.C.
4 : Terminal 1
6 : Terminal 2
6
4
2
1
3
ZC
TLP763J
2007-10-01
2
Absolute Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Forward current IF 50 mA
Forward current derating (Ta ≥ 53°C) ΔIF/°C −0.7 mA/°C
Peak forward current (100 μs pulse, 100 pps) IFP 1 A
Reverse voltage VR 5 V
LED
Junction temperature Tj 125 °C
Off−state output terminal voltage VDRM 600 V
Ta = 25°C 100
On−state RMS current
Ta = 70°C
IT(RMS)
50
mA
On−state current derating (Ta ≥ 25°C) ΔIT/°C −1.1 mA/°C
Peak on−state current (100μs pulse, 120pps) ITP 2 A
Peak nonrepetitive surge current
(PW = 10 ms, DC = 10%) ITSM 1.2 A
Detector
Junction temperature Tj 115 °C
Storage temperature range Tstg −55~125 °C
Operating temperature range Topr −40~100 °C
Lead soldering temperature (10s) Tsol 260 °C
Isolation voltage (AC, 1 min., R.H.≤ 60%) BVS 4000 Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Recommended Operating Conditions
Characteristic Symbol Min. Typ. Max. Unit
Supply voltage VAC ― ― 240 Vac
Forward current IF 15 20 25 mA
Peak on−state current ITP ― ― 1 A
Operating temperature Topr −25
― 85 °C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
TLP763J
2007-10-01
3
Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Forward voltage VF I
F = 10 mA 1.0 1.15 1.3 V
Reverse current IR V
R = 5 V ― ― 10 μA
LED
Capacitance CT V = 0, f = 1 MHz ― 30 ― pF
Peak off−state current IDRM V
DRM = 600 V ― 10 1000 nA
Peak on−state voltage VTM I
TM = 100 mA ― 1.7 3.0 V
Holding current IH ― ― 0.6 ― mA
Critical rate of rise of
off−state voltage dv / dt Vin = 240 V, Ta = 85°C ― 500 ― V/μs
Detector
Critical rate of rise of
commutating voltage dv / dt (c) Vin = 60Vrms , IT = 15 mA ― 0.2 ― V/μs
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Trigger LED current IFT V
T = 6 V ― ― 10 mA
Inhibit voltage VIH I
F = rated IFT ― ― 50 V
Leakage in inhibited state IIH IF = rated IFT
VT = Rated VDRM ― 200 600 μA
Capacitance (input to output) CS V
S = 0, f = 1 MHz ― 0.8 ― pF
Isolation resistance RS V
S = 500 V 1×1012 1014 ― Ω
AC, 1 minute 4000 ― ―
AC, 1 second, in oil ― 10000 ―
Vrms
Isolation voltage BVS
DC, 1 minute, in oil ― 10000 ― V
dc
TLP763J
2007-10-01
4
IF – Ta
Ambient temperature Ta (°C)
Allowable forward current
IF (mA)
0 20 60 100 120
60
40
20
100
0
−20 40 80
80
IT (RMS) – Ta
Ambient temperature Ta (°C)
R.M.S. on-state current
IT (RMS) (mA)
0 20 60 100 120
120
80
40
200
0
−20 40 80
160
IFP – DR
Duty cycle ratio DR
Allowable pulse forward current
IFP (mA)
3000
10
3
300
1000
500
3 100
30
100
50
3 10−1
3 10−2
10−3
Pulse width ≤ 100μs
Ta = 25°C
IF – VF
Forward voltage VF (V)
Forward current IF (mA)
100
0.1
0.6 1.8
0.3
1
0.5
1.4 1.6 1.0 1.2 0.8
3
10
5
30
50
Ta = 25°C
IFP – VFP
Pulse forward voltage VFP (V)
Pulse forward current IFP (mA)
1000
1
0.6
3
10
5
2.2 2.6 1.4 1.8 1.0
30
100
50
300
500
Pulse width ≤ 10μs
Repetitive frequency
= 100Hz
Ta = 25°C
∆VF / ∆Ta – IF
Forward current IF (mA)
Forward voltage temperature
coefficient ∆VF / ∆Ta (mV / °C)
−3.2
−0.4
0.1
−2.8
−2.4
30 50
−2.0
−1.6
−1.2
−0.8
3 5 10 0.3 0.5 1
TLP763J
2007-10-01
5
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL D AMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMEN T.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
