IRFP9240 Data Sheet July 1999 12A, 200V, 0.500 Ohm, P-Channel Power MOSFET This P-Channel enhancement mode silicon gate power field effect transistor is an advanced power MOSFET designed, tested, and guaranteed to withstand a specified level of energy in the breakdown avalanche mode of operation. All of these power MOSFETs are designed for applications such as switching regulators, switching convertors, motor drivers, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power. These types can be operated directly from integrated circuits. File Number 2294.3 Features * 12A, 200V * rDS(ON) = 0.500 * Single Pulse Avalanche Energy Rated * SOA is Power Dissipation Limited * Nanosecond Switching Speeds * Linear Transfer Characteristics * High Input Impedance Symbol Formerly developmental type TA17522. D Ordering Information PART NUMBER IRFP9240 PACKAGE TO-247 G BRAND IRFP9240 S NOTE: When ordering, use the entire part number. Packaging JEDEC STYLE TO-247 SOURCE DRAIN GATE DRAIN (TAB) 4-71 CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright (c) Intersil Corporation 1999 IRFP9240 Absolute Maximum Ratings TC = 25oC, Unless Otherwise Specified Drain to Source Breakdown Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VDS Drain to Gate Voltage (RGS = 20k) (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID TC = 125oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Linear Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Pulse Avalanche Energy Rating (Note 4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg IRFP9240 -200 -200 -12 -7.5 -48 20 150 1.2 790 -55 to 150 UNITS V V A A A V W W/oC mJ oC 300 260 oC oC CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 125oC. Electrical Specifications TC = 25oC, Unless Otherwise Specified MIN TYP MAX UNITS Drain to Source Breakdown Voltage PARAMETER SYMBOL BVDSS ID = -250A, VGS = 0V (Figure 10) -200 - - V Gate Threshold Voltage VGS(TH) VGS = VDS, ID = -250A -2.0 - -4.0 V - - 25 A - - 250 A -12 - - A Zero Gate Voltage Drain Current IDSS TEST CONDITIONS VDS = Rated BVDSS, VGS = 0V VDS = 0.8 x Rated BVDSS, VGS = 0V, TJ = 125oC On-State Drain Current (Note 2) Gate to Source Leakage Current Drain to Source On Resistance (Note 2) Forward Transconductance (Note 2) Turn-On Delay Time Rise Time ID(ON) IGSS rDS(ON) gfs td(ON) tr Turn-Off Delay Time td(OFF) Fall Time VDS > ID(ON) x rDS(ON)MAX, VGS = -10V VGS = 20V - - 100 nA ID = -6.3A, VGS = -10V (Figures 8, 9) - 0.380 0.500 3.8 5.7 - S - 18 22 ns - 45 68 ns - 75 90 ns - 29 44 ns - 38 57 nC - 8 - nC VDS -50V, ID = -6.3A (Figure 12) VDD = -100V, ID -12A, RG = 9.1, VGS = -10V, RL = 7.6, (Figures 17, 18) MOSFET Switching Times are Essentially Independent of Operating Temperature tf Total Gate Charge (Gate to Source + Gate to Drain) Gate to Source Charge Qg(TOT) Qgs Gate to Drain "Miller" Charge Qgd Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS VGS = -10V, ID = -12A, VDS = 0.8 x Rated BVDSS Ig(REF) = -1.5mA (Figures 14, 19, 20) Gate Charge is Essentially Independent of Operating Temperature VDS = -25V, VGS = 0V, f = 1MHz (Figure 11) Internal Drain Inductance LD Measured From the Contact Screw on Header Closer to Source and Gate Pins to Center of Die Internal Source Inductance LS Measured From the Source Pin, 6mm (0.25in) From Header to Source Bonding Pad Modified MOSFET Symbol Showing the Internal Devices Inductances D - 21 - nC - 1400 - pF - 350 - pF - 140 - pF - 5.0 - nH - 12.5 - nH - - 0.83 oC/W - - 30 oC/W LD G LS S Thermal Resistance Junction to Case RJC Thermal Resistance Junction to Ambient RJA 4-72 Free Air Operation IRFP9240 Source to Drain Diode Specifications PARAMETER SYMBOL Continuous Source to Drain Current TEST CONDITIONS ISD Pulse Source to Drain Current (Note 3) Modified MOSFET Symbol Showing the Integral Reverse P-N Junction Rectifier ISDM MIN TYP MAX UNITS - - -12 A - - -48 A D G S Source to Drain Diode Voltage (Note 2) TJ = 25oC, ISD = -12A, VGS = 0V, (Figure 13) TJ = 25oC, ISD = -11A, dISD/dt = 100A/s TJ = 25oC, ISD = -11A, dISD/dt = 100A/s VSD Reverse Recovery Time trr Reverse Recovery Charge QRR - - -1.5 V - 210 - ns - 2.0 - C NOTES: 2. Pulse test: pulse width 300s, duty cycle 2%. 3. Repetitive rating: pulse width limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3). 4. VDD = 50V, starting TJ = 25oC, L = 8.2mH, RG = 50, peak IAS = 12A (Figures 15, 16). Typical Performance Curves Unless Otherwise Specified 15 ID, DRAIN CURRENT (A) 1.0 0.8 0.6 0.4 0.2 12 9 6 3 0 0.0 0 25 50 75 100 TC , CASE TEMPERATURE (oC) 125 150 25 50 75 100 125 150 TC, CASE TEMPERATURE (oC) FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE 2 1 0.5 ZJC, NORMALIZED THERMAL IMPEDANCE POWER DISSIPATION MULTIPLIER 1.2 0.2 0.1 0.1 0.05 PDM 0.02 0.01 10-2 10-3 10-5 t1 t2 SINGLE PULSE NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC x RJC + TC 10-4 0.1 10-3 10-2 t1, RECTANGULAR PULSE DURATION (S) FIGURE 3. MAXIMUM TRANSIENT THERMAL IMPEDANCE 4-73 1 10 IRFP9240 Typical Performance Curves Unless Otherwise Specified (Continued) -103 20 ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) -102 100s 1ms -10 10ms OPERATION IN THIS AREA IS LIMITED BY rDS(ON) DC -1 -1 VGS = -7V 16 12 VGS = -6V 8 VGS = -5V 4 TJ = MAX RATED SINGLE PULSE -0.1 VGS = -4V -10 -102 VDS, DRAIN TO SOURCE VOLTAGE (V) 0 -103 0 -102 VGS = -10V 16 ID, DRAIN CURRENT (A) VGS = -8V 12 VGS = -7V 8 VGS = -6V 4 40 60 80 100 FIGURE 5. OUTPUT CHARACTERISTICS 20 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 20 VDS, DRAIN TO SOURCE VOLTAGE (V) FIGURE 4. FORWARD BIAS SAFE OPERATING AREA ID, DRAIN CURRENT (A) PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VGS = -10V VGS = -8V 10s VGS = -5V PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDS -50V -10 TJ = 150oC TJ = 25oC -1.0 VGS = -4V 0 0 2 4 8 6 10 -0.1 0 -2 VDS, DRAIN TO SOURCE VOLTAGE (V) FIGURE 6. SATURATION CHARACTERISTICS 3.0 NORMALIZED DRAIN TO SOURCE ON RESISTANCE rDS(ON), DRAIN TO SOURCE ON RESISTANCE () PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX 4 3 VGS = -10V 2 1 VGS = - 20V 0 -10 -30 -20 ID, DRAIN CURRENT (A) -40 -6 -8 2.4 1.8 1.2 0.6 0 -50 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VGS = -10V, ID = -6.3A -40 0 40 80 120 TJ , JUNCTION TEMPERATURE (oC) NOTE: Heating effect of 2s pulse is minimal. FIGURE 8. DRAIN TO SOURCE ON RESISTANCE vs GATE VOLTAGE AND DRAIN CURRENT 4-74 -10 FIGURE 7. TRANSFER CHARACTERISTICS 5 0 -4 VGS, GATE TO SOURCE VOLTAGE (V) FIGURE 9. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE 160 IRFP9240 Typical Performance Curves 3000 ID = 250A 1.15 C, CAPACITANCE (nF) NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE 1.25 Unless Otherwise Specified (Continued) 1.05 0.95 VGS = 0V, f = 1MHz CISS = CGS + CGD 2400 CRSS = CGD COSS CDS + CGD 1800 CISS 1200 COSS 0.85 600 CRSS 0.75 -40 0 40 80 120 0 160 -1 TJ , JUNCTION TEMPERATURE (oC) FIGURE 10. NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE vs JUNCTION TEMPERATURE -5 -10 -2 -5 VDS, DRAIN TO SOURCE VOLTAGE (V) -102 FIGURE 11. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE -100 10 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDS -50V ISD, DRAIN CURRENT (A) 8 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX TJ = 25oC 6 TJ = 150oC 4 2 0 0 -4 -8 -12 -16 TJ = 150oC -1.0 -0.1 -0.4 -20 -0.6 -0.8 -1.0 ID = -12A VDS = -160V VDS = -100V VDS = -40V 12 8 4 0 12 24 36 48 60 Qg(TOT), TOTAL GATE CHARGE (nC) FIGURE 14. GATE TO SOURCE VOLTAGE vs GATE CHARGE 4-75 -1.4 -1.6 FIGURE 13. SOURCE TO DRAIN DIODE VOLTAGE 16 0 -1.2 VSD, SOURCE TO DRAIN VOLTAGE (V) FIGURE 12. TRANSCONDUCTANCE vs DRAIN CURRENT 20 TJ = 25oC -10 I D , DRAIN CURRENT (A) VGS, GATE TO SOURCE (V) gfs, TRANSCONDUCTANCE (S) -2 -1.8 IRFP9240 so Test Circuits and Waveforms VDS tAV L 0 VARY tP TO OBTAIN - RG REQUIRED PEAK IAS + VDD DUT 0V VDD tP VGS IAS IAS VDS tP 0.01 BVDSS FIGURE 15. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 16. UNCLAMPED ENERGY WAVEFORMS tON tOFF td(OFF) td(ON) tr 0 - DUT VGS VDS VDD 90% 90% VGS 0 + 10% 10% RL RG tf 10% 50% 50% PULSE WIDTH 90% FIGURE 18. RESISTIVE SWITCHING WAVEFORMS FIGURE 17. SWITCHING TIME TEST CIRCUIT -VDS (ISOLATED SUPPLY) CURRENT REGULATOR 0 VDS DUT 12V BATTERY 0.2F 50k 0.3F Qgs Qg(TOT) DUT G VGS Qgd D VDD 0 S Ig(REF) IG CURRENT SAMPLING RESISTOR 0 +VDS ID CURRENT SAMPLING RESISTOR FIGURE 19. GATE CHARGE TEST CIRCUIT 4-76 Ig(REF) FIGURE 20. GATE CHARGE WAVEFORMS IRFP9240 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 4-77 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029