HL CONNECTOR 3.96mm pitch Disconnectable Crimp style connectors Specifications ------------------ L JS T * Current rating: 7A AC, DC (Refer to the table below.) * Voltage rating: 300V AC, DC * Temperature range: -25C to +90C (including temperature rise in applying electrical current) * Contact resistance: Initial value/7m max. After environmental testing/10m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,500V AC/minute * Applicable wire: AWG #22 to #18 * Applicable PC board thickness: 1.5 to 2.2mm Note: The current rating differs depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. Current unit:A Circuits 4 8 12 #18 Wire size(AWG) #20 #22 7 6 5 5 4 3 4 3 3 Note: Do not branch in parallel current which exceeds the rated current (eg. more than 7A in the case of 4 circuits with AWG #18). If branched in parallel, current imbalance or other problems may develop. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 * Housing lances for contact retention * Inner-housing lock * Secondary retainer * Low insertion force contact Recognized E60389 1 Certified LR20812 2 R50171609 PC board layout (viewed from component side) (8 circuits) 0.05 2-1.5 2-1.5 3.96 2.25 0.05 0.05 3.96 8.46 2.25 0.05 0.05 11.88 3.96 0.1 16.38 2.25 0.05 0.05 2-1.5 0.05 0.05 2.25 12-1.5 7.1 0.1 0.1 2.7 2.7 7.1 0.1 0.05 2.7 0.1 8-1.5 0.1 0.05 0.1 4-1.5 (12 circuits) 7.1 (4 circuits) 2.25 0.05 0.05 0.05 19.8 0.1 2.25 0.05 24.3 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 HL CONNECTOR Contact Applicable wire mm2 AWG # Model No. SSF-21T-P1.4 0.30.75 Insulation O.D. (mm) Q't y / reel 1.52.2 6,000 4.3 2218 Material and Finish 1.0 12.6 Phosphor bronze, tin-plated (reflow treatment) RoHS compliance 1.9 SSF-21T-P1.4 2.2 Applicator Dies Crimp applicator with dies MKS-L MK/SSF/M-21-14 APLMK SSF/M21-14 Crimping machine Crimp applicator Contact AP-K2N Note: *Strip-crimp applicator Housing (4 circuits) L JST Circuits 3 4 2 1 Circuit No.1 2.5 2.63.962.6 Q'ty / bag 4 HLP-04V - - 500 8 HLP-08V 11.88 17.08 500 12 HLP-12V 19.8 25.0 500 14.2 9.16 Dimensions (mm) A B Model No. Material 11.7 7.5 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. 9.3 19.1 RoHS compliance 11.6 PA 66, UL94V-0, natural (white) 3.3 4.4 ex. HLP-04V-oo(blank)...natural (white) E...blue Circuits Model No. 4 B04P-HL-A 3.96 9.56 8.46 200 8 B08P-HL-A 11.88 17.48 16.38 100 12 B12P-HL-A 19.80 25.40 24.30 50 4.4 (8, 12 circuits) L JST 5 7 6 3 2 8 4 1 Circuit No.1 15.1 B 11.7 2.5 2.6 A 3.3 9.3 11.6 19.1 7.5 2.6 4.4 4.4 Locking header (4 to 12 circuits) A Dimensions (mm) B C Q'ty / box 5 8 1 4 7.2 Material and Finish Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, natural (white) RoHS compliance This product displays (LF)(SN) on a label. 1.3 A C B 2.7 7.1 11.7 14.2 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B04P-HL-A-oo(blank)...natural (white) E...blue 2 HL CONNECTOR Retainer HLS-08V Applicable Housing Model No. Retainer Model No. Q'ty / bag HLP-04V HLS-02V 1,000 HLP-08V HLS-08V 1,000 HLP-12V HLS-12V 1,000 7.1 7.1 3.8 3.8 HLS-02V Material Glass-filled PA 66, UL94V-0, natural (ivory) 7.16 17.28 RoHS compliance 7.1 3.8 HLS-12V 23.0 3 4 4 8 6 12 1 3 3 7 5 11 2 6 4 10 1 5 3 9 2 8 1 7 JST 2 JST JST Contact position location numbers