Specifications ––––––––––––––––––
• Current rating: 7A AC, DC (Refer to the table below.)
• Voltage rating: 300V AC, DC
• Temperature range: -25˚C to +90˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/7m Ωmax.
After environmental testing/10m Ωmax.
• Insulation resistance: 1,000M Ωmin.
• Withstanding voltage: 1,500V AC/minute
• Applicable wire: AWG #22 to #18
• Applicable PC board thickness: 1.5 to 2.2mm
Note:
The current rating differs depending on the number of circuits and the wire size
used in each connector. The table below lists the current rating as a function of
the number of circuits and the wire size.
Note:
Do not branch in parallel current which exceeds the rated current (eg. more than 7A in
the case of 4 circuits with AWG #18). If branched in parallel, current imbalance or other
problems may develop.
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2R50171609
• Housing lances for contact retention
• Inner-housing lock
• Secondary retainer
• Low insertion force contact
Current unit:A
Note: 1. Tolerances are non-cumulative:
±
0.05mm for all centers.
2.
Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
(4 circuits) (8 circuits) (12 circuits)
PC board layout (viewed from component side)