40 9 8 7 6 5 4 | 3 2 4 CIRCUIT No. 50 CIRCUIT No. 26 F ) 44,33 | = epee sensocoogooooooooooed | YS | io N = ~ LO Lol = 7| LO oO a] Wr |e i 1270.1 AS al Pl sd H1O ~ . op tage IMAX. SIS | (30.48) ~ + A af am |e 43 ~ A A my yn SCALE: 5-| CIRCUIT No. 25 CIRCUIT No.| 47.23 a 46.23 0.9 0.6 | I Q\8 7 | |a ai SIF ] __ Ln FE | 7 t | f T wo]? 3 my RS 165 || 3 L | 65 col YY oS AS a oO Mw I | N x | : | / mise [HI A Lo} LOY LOY N Noa] + T - C <j Tv L/ i CIRCUIT No. 50 0.65920. [94.45 |___19.29 16.29 _| | 31.1150, 15 | CIRCUIT No. | 24.69 21.69 | 40.97 44.67 \5 [CIRCUIT No. 26 : 55358-502 | 55358-50** MATERIAL No. MODEL No. es Ss GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE eo (UNLESS SPECIFIED) MM ONLY 2:1 METRIC C1 pROVECTION ss s DRAWN BY DATE TITLE a ~ S13) 4Q UNDER +02 |T.HIRAYAMA "98/09/04 CF CARD CONN. 3 |E OVER UNDER T. CHECKED BY DATE 50P HEADER ASSY azs [5 10 30 +0.25 M.SASAQ "98/09/01 (TYPE. |/ILNORMAL) ot WW APPROVED BY DATE Ag ez = (30% +03 WH IKESUG! "98/09/01 Kale MOLEX INCORPORATED YS = e| [ANGULAR +30 MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE TABLE SD-55358-003 1 0F 2 PE OO = _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX E i WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S 9 B 7 6 | 5 | 4 | 3 | 2 EN-02JA(024) Rev. E 2006/04/1510 Rev. E 2006/04/15 6 | 5 )_ 1. Me AX YIUS-FILid, ZHERBEXULEA 0.05 FA 0.1DGAITBU, NOTES MATERIAL \ BDV |LS-F)LOSHOHId, 0.1 MAX. CL, F/ LSC CRIED S. AGUSING TOUS CRYSTAL ite SF. UL94V-0 SOLDERTAILS TO BE WITHIN 0.05 UPWARD AND > aS 0.1 DOWNWARD FROM Z-DATUM PLACE, AND COPLANARITY OF SOLDERTAILS TO BE WITHIN O.l. BIN: PHOSPHOR BRONZE 3) MEASUERMENT POINT IS SOLDERTAILS TIP. NAIL: PHOSTHIQR, BRONZE, (10.3) On" Cpu ATIVE Y ~ FILER), UVR-)/LAHRE SHERI, 0.1 MAX.&9S, 2 ee PHOSPHOR BRONZE (t0.48) TOTAL COPLANARITY OF SOLDER TAILS, NAILS BATING AND REAR-NAILS TO BE 0.1 MAX. ey eRe C/U ATV) Boyt C PIN CONTACT AREA: GOLD OVER PALLADIUM-NICKEL 29.8420. | FAS TEB s SEX wy SOLDER TAIL AREA: TIN-LEAD 2,970.1, 45.0170. =. 2:90.| Bbxy 2 Dy aL Xs 5.3 2.5 UNDERPLATING: NICKEL OVER ALL 44,33+0.05 Ll wo Ro)L BARB SE | * NAIL CONTACT AREA: GOLD : FAA SEB s HEX y Ly SOLDER TAIL AREA: TIN-LEAD | GND _~ ef UNDEROLATING NICKEL OVER ALL | ar = CD a WVR)L EBX ye +14 | 82.380.05. a RE NA EN ac ycyt EL] 2 8:420.08 ror eect assy] Uap ss ie) = UNDERPLATING: COPPER OVER ALL to] O HOLE | 55364-001) 4 2 3. HSER 2 t =0.8 MIN. S : vt RECOMMENDED P.C.B. THICKNESS: t=0.8 MIN. a) ial ts A. WSAKE : 3.30.1 (TYPE I) AND 5 MAX. (TYPE ID Slo | afm RECOMMENDED CARD THICKNESS: 3.30.1 (TYPE I) AND 5 MAX. (TYPE ID a) 3,640. | 37.3740. | 3.640. | gl 5. #G7K Bs 42,840, | 5) =] 8 RECOMMENDED CARD WIDTH: 42.8+0. | x] (Ee tay _12 29940. | a 23.0720. gl Ble 6. /\IVVTIB: 0.42 MIN, OR A HOUSING COLOR: BLACK mo} ff =| TEM: |, 13,38,50 TUIS DIMENSION APPLIES TO CIRCUIT NUMBERS | CTT C A |,13 ,38 AND 50. Glow CIRCUIT _No.26 I RFE: 25,26 Ad.0.635+0.05 g THIS DIMENSION APPLIES TO CIRCUIT NUMBERS 25 AND 26. -6390. & KUOBid. CD ARceRMIC SATA 0.1 MAX. 3S, 31.11520.05 7 PIN TIP_LEAN TOWARD ANY DIRECTION NOT TO EXCEED 0.1 CIRCUIT No.50 : : CIRCUIT No. | WHEN MEASURED FROM PIN BASE. _ ee [40.97] Ay CUBISES S. =| THIS DIMENSION TO BE MEASURED AT PIN BASE. SETHE IK RECOMMENDED P.C.B. LAYOUT es Ss GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS HIR NGLE eas (UNLESS SPECIFIED) MM ONLY 2:1 METRIC Og GE a ION Ss s s DRAWN BY DATE TITLE a ~* 12) 4Q UNDER +02. |T.HIRAYAMA 98/09/01 CF CARD CONN. = < E OVER UNDER CHECKED BY DATE 50P HEADER ASSY azs [5 10 30 +0.25 M.SASAQ "98/09/01 (TYPE. |/ILNORMAL) ot WW APPROVED BY DATE Ag ez = (30% +03 WH IKESUG! "98/09/01 Kale MOLEX INCORPORATED S 3 = ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE SHEET SD-55358-003 2 0F 2 PE OO = _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX E iw WITHIN DIMENSIONS AS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S 4 | 3 | 2 EN-02JA(021)8 7 6 5 4 3 2 S 2 a CIRCUIT No. 5@ CIRCUIT No. 26 rT te 44,33 f, SB [ | E 3 Ir AMAA TT = | = oo Meoooocogesodoooeogoooaae| [fi I Lo a ~ [Pee ceseceecesaeceeueceesd 7 , 2 oO E ! 4 at h N tlio 7 T ~ Of = 3/8 ple 2720.1 Jd e| Ol 0s \ Ad 0.05MAX,. ||_0. MAX. AAS rye PITCH 020 ag) H qo : *. A-A A : 43 S os - SCALE: 5-1 CIRCUIT No. 25; \ CIRCUIT No.| | | D tt 8 o | ~ | t | , | | | 7 bs a | 1 i - 7 ~ wo Li ke A ne =| X | it LO] os | 0 u ~ I.65 s0] S| 9 N J C Ta) 1 i od| ~ | wo) ott HANG hhh hfanddid@adadnad ann N Zz] 5 | Ir N i Moonen wean nici wacinn = 4 qu AIIM Ud) JIU ed aI ASIII Wet Piz] yoo ELE i : 7 | . O bk ho L REAR-NAIL ; 1] QQ) NS) Ta Y TE T l | ICM ' Bol v) ONE EL | 0.635+0.| le CIRCUIT No. 5@ woes: Q.3 IN o 4.45 | 19.29 16.29 | a 31.11540.15 CIRCUIT No. | 24.69 21.69 ~| B 40.97 44.67 \" |CIRCUIT No. 26 55358-502 | 55358-50* ns - MATERIAL No. MODEL No. DIMENSIONS: SHT | REV EEE MATERIAL GENERAL TOLERANCES: SCALE] DESIGN UNITS Mm -JINCH pg mm 3 giaa) |e THES PETES TS [gm nes] Cl ae Cinch CFR PLANT [FEE = ass lz T DRAWN BY & DATE : z mie <8 SEE NOTES Io SNQER 02 | oF Wamryrs verve) Nt CE CARD CONN. x as = 3S aS OVER UNDER CHECKED B & DATE SOP HEADER ASSY 4 HR SEAS FINISH Dye 30mm [202 SAM 02/06/17 (TYPE I/II, NORMAL) Lu Pr 2314 APPROVED BY & DATE S| se cl de el ge cl Se ese SEE NOTES 300" 034 Suma oven ex MOLEX INCORPORATED _ Seet| See) feet) FSeT) = S25) Re Rance | [CAD FILENAME MATERIAL NO. DRAWING NO. SHEET NO. 8 noo noo uoaoes wuaos wuao AE mei # ANGLE #42 23 S$D-55358-O11.S0| SEE CHART S$B-55358-@1/ | OF 3 iu) INS. RANGE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX SIZE 5 = | RENE INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION. B 7 6 5 4 3 2 | EN-@2J(@97) MXJ-545 | 4 3 2 8 =|, 22. 1: BA VILI-F Id, ZHEBWECULA 0.05 PA 0. OMIT), SPNOTES MATERIAL BOUILI-F |LOFIEI, 0.1 MAX. EL, F ILE CHET Se 0 INJUGUT PADGAAULCP ULS4V0 0 HOUSING: LIQUID CRYSTAL POLYMER G.F. UL94V-0 SOLDER TAILS TO Be WITHIN 0.05 Hew ard AND ~ Bn oor ve Q.| DOWNWARD FROM Z-DATUM PLACE, AND COPLANARITY OF if Ne PHOCPHOS BRONZE SOLDERTAILS TO BE WITHIN 0.1. sa iL test (10. 3) MEASUERMENT POINT IS SOLDERTAILS TIP. 20 NAIL? PHOSPHOR BRONZE (t.3) LD, BER g 7e)L 3 Jue (tO. 48) NON- CUMULATIVE <4 a REAR-NAIL: PHOSPHOR BRONZE (t@.48) FILER) VR/LE HC TOASER, @.1 MAX. 94, 2, ey EATRE TOTAL COPLANARITY OF SOLDER TAILS, NAILS E DATING AND REAR-NAILS TO BE @.1 MAX. Ky ferme SNDVILI VAIL MI eo C PIN CONTACT AREA: GOLD OVER PALLADIUM-NICKEL | ERATITEB s HEB y 2,540.1 43.010. | 2.540. | SOLDER TAIL AREA: TIN-LEAD | Bibs 3s DyTIL xy UNDERPLATING: NICKEL OVER ALL 44.3320.05 RIL mes fet NATL CONTACT AREA: GOLD SEERA IER s BEBO - | D SOLDER TAIL AREA: TIN-LEAD S Bit 3 y7ILX yt wv ex UNDERPLATING: NICKEL OVER ALL 1 q ') Sb RX y+ REAR-NAIL TIN-LEAD [ | \2- B1.4#0.05 | MBX Es Sil>oy i HOLE i | UNDERPLATING: COPPER OVER ALL 8 @_; 3. HPERAMUE 2 t=0.8 MIN, S i RECOMMENDED P.C.B. THICKNESS: t=0.8 MIN. A | 2 4. 38SHKE : 3.340.1 (TYPE 1) AND 5 MAX. (TYPE II) |S . _ & RECOMMENDED CARD THICKNESS: 3.3#0.1 (TYPE I) AND 5 MAX. (TYPE II) A] 2 3,620, | 51.3140. 3,6*0:| Ss 3 C 5. MAN-KIB: 42.8+0. | Sug] | 5.9940.1 | 23.0720. 2.7 0) |& RECOMMENDED CARD WIDTH: 42.820. | N = a a] 2 6. /NIVUTB: 1 HOUSING COLOR: BLACK He DX, WSL |, 13,38,50 C] _ Lt | | THI DIMENSION APPLIES TO CIRCUIT NUMBERS 38 CIRCUIT No.26 st Ax S2sHFBE? 25,26 AS 0.63540.05 Ss THIS DIMENSION APPLIES TO CIRCUIT NUMBERS 25 AND 26. ws (PITCH) m LUMA Id. CURE RDECSBEA 0.1 MAX.694. 31,115#0,05 v PIN TIP LEAN TOWARD ANY DIRECTION NOT TO EXCEED @.| CIRCUIT No.50 CIRCUIT No. | B A WHEN MEASURED FROM PIN BASE. OO 40.97 LUST OES 5. a - THIS DIMENSION TO BE MEASURED AT PIN BASE. BUSHES A RECOMMENDED P.C.B. LAYOUT DIMENSIONS: SHT REV 5 ~) ENE TO Ss Sec SNE | Samm Come | CI pane ANGE] pen Cl Burr | REWSE ON Zz So Ae = _|2 SEE NOTES Io YNQER 02 fer ae, eevee) UE CF CARD CONN. a |~ | 8, OVER ONDER CHECKED BA DATE 5@P HEADER ASS'Y mie S 0) | LINISH Oye 30mm 25) Seamer orv06/i7 (TYPE I/II, NORMAL) oa ld w S| sz 2] dz el Secel gecel S2.% SEE NOTES 30 Sve 03 ty Cena eavessn MOLEX INCORPORATED _ Seen) 2een) Fee) Feer) = S28) Pye ance ~ [CAD FILENAME MATERIAL NO. DRAWING NO. SHEET NO. 2 waco waco uaoe moaoed mouaov.e BAER i A # ANGLE BE #3 SD-55358-@11.S02 SB-55358-@ i 2 ia] INS. RANGE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX SIZE a S | REA E INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION. B 5 4 3 2 EN-@2J(097) MXJ-548 2 NORMAL MOUNT TYPE REFERENCE USE ONLY : (55358-5021 & 55356-@@1)) HEADER ASSY ae 55358-502 | Ww 2 LO oO! 20 oO Y = Po LS _ a no F C 34.25 23.62 29.69 8.05 | SHELL ASSY 4.25 cF_CARD 55356-0011 SD-55356-002 BR q SEE S$D-55356-002 | | 0 | i} + tr | MXJ 2 _ | 58776 2 ! | 4 | = oo | S ~ a T m | Cc | wes) O | @ | @ Nl 2p | i | nj S 8.22 20.49 | 20.49 4.2 (29.89) B al al DIMENSIONS: SHT REV GENERAL TOLERANCES: SCALE] DESIGN UNITS mm INCH 5 mm m YAg RIAL {UNLESS SPECIFIED) 2 - | xmm Cincy | TC] PROJECTION. Cincn O'mm % oncy CAD ONLY. 3 z t+ UNDER DRAWN BY & DATE TITLE: 2 S g Io YNot 10.2 |e ag 03/06/17 CF CARD CONN. o| -~ 5 Es OVER UNDER CHECKED BY & DATE SOP HEADER ASSY us) iw 3) FINISH IP ye 30m |*O2 SoAW 02/06/17 (TYPE 1/II,NORMAL) Wy ud = t APPROVED BY & DATE aN Sl sg...) ozo oe el oe elboe cl, 305 0.3 avoern) oe MOLEX INCORPORATED _ -e20| ~220| *~228) ~220)* 220! Pyne ance CADY FILENAME MATERIAL NO. DRAWING NO. SHEET NO. 8 poaok poaok poaok Rao e Bao e AE mei t- ANGLE #42 23 SD-55358-011.S03 SD-55358-@1| 3 > 3 in| INS. RANGE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX SIZE a | RENE INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION. B 3 7 5 5 4 3 | > | EN-O2(097) MXJ-5440 | 9 | 8 7 a =) Ay KIY * Larch, NOTES BUTTONS FULL STROKE POSITION. Ay KIUIBNATE BUTTONS IN POSITION. Ay OY SHR, BUTTONS OUT POSITION. A TUITE D-SUB (3.25)mm, IN EJECTING OPERATION, CARD OUT BY (3.25)mm. Rev G 2012/01/25 zt i) y = 7.53 5 4 ~ a < CF CARD 7 3.83 4 ~*++- [ : a t | + 1 @ | Oo i | 2] 9] | MXJ ; Oo % 3 3 | 588 10 | th M2 4 qa ! | = . | H . 8 | m | A | is RK | J : i = oO Lo I ! ng) 9 = EJECT ASSY | 55364-0011 MATERIAL No. Ss S GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD NGLE Sse (UNLESS SPECIFIED) MM ONLY 2:1 METRIC | cee TION onc DRAWN BY DATE TITLE on lz [70 UNDER +02 |THIRATA 1998/09/08 CF _CARD_CONN. S EL yee SHOWER CHECKED BY DATE EJECT MECHANISM oe le 10 30 +0.25 MSASAO 1998/09/08 (TYPE_I/IlL NORMAL) SSo=ze Ww OVER APPROVED BY DATE ARBs s| (20 +03 HIKESUGI 1998/09/08 molex S 33 = ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE TABLE SD-55364-003 1 OF 3 PE = _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX D i WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S 9 8 7 6 5 | 4 | 3 | 2 |10 9 8 7 6 5 4 3 2 4 t 29.84 t 29.8440. | fot | a 48.23 2,520.1, 43.0140. | 2.9+40./ 39 7.5 = | 5.3 2.5 _ PCB | 0.95 | GND II 9) 1 9 s 1 44,33+0.05 w A SY [ [ | V7 (> A of | Lo | [| | 2.340.05 J id pec iags 2597 oY) q | HOLE by inal 6 _ f __| "CATR 0 FOR 55359-502| C1 E 8 mr q | 3 8 36.17 mf lo 4- @ |.4#0,.05 al al 2 oO =} My 4.5 alos | HOLE Hl 3 | ~ - %| _,] 3:6#04! 37.3740. | 3.640. | wo] S | t 33 S]B} 9] J) 15.9940.1 1 23.07+0. | 2.7 N | + ~ | 3] [1.0.42 MIN. | Sep pact _ I4ASs | ' an Treo to pv y ---- --- to ee == =r -o==-4 oll |\ qc keemanax | PTI gIe == = == posaoe PIT ~ BERLED. (27) =| CIRCUIT _No.26 w S 40.97 2 pete 263520.05 (PITCH) & = (NON-ACCUMULATIVE) m COMED THM TETS. CIRCUIT No.50 31. 115+0.05 CIRCUIT No.| 40.97 SERENE RECOMMENDED P.C.B. LAYOUT 2s S GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE Sse (UNLESS SPECIFIED) MM ONLY 2:1 METRIC | CJ PROJECTION Se = DRAWN BY DATE TITLE a ~~ )8) 4Q UNDER +0.2 |THIRATA 1998/09/08 CF CARD CONN. Rm |EDAover ONDER TS CHECKED BY DATE EJECT MECHANISM 2 |g 10 30 +0.25 MSASAO 1998/09/08 (TYPE I/Il NORMAL) SS=e/u OVER APPROVED BY DATE Asses)" |30 +3 IKESUG! 1998/09/08 molex S 33 = ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. no 2=t DRAFT WHERE APPLICABLE SEE SHEET SD-55364-003 2 OF 3 PE = _ MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX D iB WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S Rev G 2012/01/25 9 8 7 6 | 3 | 4 | 3 | 2 |40 | 9 | 8 7 6 5 4 3 2 MOUNTING Me THOD RO.3 0.3 } | s 5.35 SCREW TAP M2 SCREW IRD eee DETAIL OF BUTTON 2s S GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SES (UNLESS SPECIFIED) MM ONLY 10:1 METRIC | Cl egoyection = = = DRAWN BY DATE TITLE a ~~ )8) 4Q UNDER +0.2 |THIRATA 1998/09/08 CF CARD CONN. Rm |EDAover ONDER Tope ERED BY DATE EJECT MECHANISM t 2S 10 30 +0.25 MSASAO 1998/09/08 (TYPE I/ll NORMAL) SSs=ejy OVER [APPROVED BY DATE asszy) (30 +03 HIKESUG! 1998/09/08 molex 2 S = 8a| [ANGULAR +30 MATERIAL NO. DOCUMENT NO. SHEET NO. =xyYo _ _ ioe=h DRAFT WHERE APPLICABLE SEE SHEET SD-55364-003 3 OF 3 ru oo< = MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX D i WITHIN DIMENSIONS A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_J_ME_S Rev G 2012/01/25 9 8 7 6 | 3 | 4 | 3 | 2 |