1. CENTER CONTACT IS CAPTIVATED AND HAS A x.043 DIA WIRE ENTRY HOLE. 2. MATERIALS OF CONSTRUCTION: BODY: BRASS, NICKEL PLATED. INSULATOR: PTFE CENTER CONTACT: BRASS, GOULD PLATED, .000003. COUPLING NUT: BRASS, NICKEL PLATED. FERRULE: COPPER ALLOY, NICKEL PLATED. CRIMP USING AMPHENOL TOOL FRAME 227-944 WITH DIE SET ee7-1409, CAVITY B 052 SQ OR SOFT SOLDER PER QQ-S-571, COMP Sn60. CRIMP USING AMPHENUDL TOOL FRAME 227-944 WITH DIE SET 227-1409, CAVITY A .e13 HEX. ASTERISK INDICATES CABLE ENTRY DIMENSIONS. DO NOT SCALE THIS DRAWING. .015 .015 m 218 -~ RECOMMENDED CABLE STRIPPING DIMENSIONS DIELECTRIC & BRAID UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE AFTER PLATING. * 2 206 x @ 131 81-115N-1000 REVISIONS DRAWING NO. REV DESCRIPTION DATE ECO APPR THIRD ANGLE PRU. G [A RELEASE TO MFG. 5/13/93 | 39996 [RAV | B |SEE SHEET 1 FOR REVISIONS o//97 | 42003 [CPM MINI UHF PLUG INTERFACE. WILL MATE WITH ANY STD MINI UHF JACK CONNECTOR, CB 447) \ (1.097 ASSEMBLED) iv .375-24UNF-eB THD UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE: MATERIAL DRAWN DATE TITLE A h | 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES Mm +.015 (0,381 mm) +.005 (0,127 mm) + 1 J. MULVEY 3/28/94 MINI UHF PLUG p eno NOTICE These drawings, specifications, or other data (1) are, and remain the ENGINEER DATE CRIMP-CRIMP FOR Amphenol Corporation property af Amphenol Corp. (2) must be returned upon request; and (3) are R, VACCARG 5/5/94 RF /Microwave Operations confidential and not to be disclosed to any person other than those to whom they REFERENCE RGS8/U CA,B,C) CABLE Danbury, Conn U.S.A 06810 are given by Amphenol Corp. The furnishing of these drawings, specifications, or T APPROVED DATE EYE ET VER , , ~ other data by Amphenol Corp., or to any other person to anyone for any purpose is ANTENNA SPECIALISTS J. MULVEY 3/28/94 L STON not to be regarded by implication or otherwise in any manner licensing, granting EAR 964120-0 SCALE: 4:1 | SHEET 2 OF 2 rights or pene such nolder or oy. oiner person to manufacture, ose or Sel oy CAD FILE CODE ID |DwG SIZE] DRAWING NO. REV product, ess or design, patente wise, ay in any way or disclosed by said drawings, specifications, or other data. AN DEPT6LI\NMUHF NO8INASSYNILSN\1000SH2 74868 B 81-115N-1000 B