24926 Highway 108 Sierra Village, CA 95346 Phone: (800) 545-1022 Fax: (209) 586-1026 E-Mail: sales @olsontech.com LaserPlus Model LP-OLAR - Advanced L-Band Receiver Fully compatible with all Olson Technology, Inc.'s L-Band transmitters. Extreme bandwidth range of 10MHz to 4,000MHz handles all satellite signals. Excellent L-Band performance with digital gain control over a 25dB RF range in 1dB steps. Optional APD Detector for enhanced sensitivity. PIN detector is standard. Optical input range from -15dBm to +3dBm with standard PIN detector or -22dBm to -3dBm with optional APD detector. Operational wavelengths from 1270nm to 1610nm. range Built-In test points, LED indicators and alarms for easy setup and maintenance. Available with a variety of 75 Ohm or 50 Ohm Connectors. 75 Ohm "F" connector is standard. SC/APC optical connector standard, FC/APC connector optional. Rev X2 The Olson LaserPlus LP-OLAR Advanced LBand Receiver offers a feature-rich, versatile system in a compact rack-mount package. The Advanced L-Band Receiver has been engineered to meet today's high performance standards for L-Band transport with an extreme bandwidth range that will also allow the system to handle the next generation of satellite signals. The Advanced L-Band system is ideal for a wide variety of communications applications, including L-Band satellite antenna remoting, trunking radio, telemetry tracking, and time and frequency reference distribution. The extended frequency range to 4GHz allows this system to accommodate additional transponders coinciding with common European satellite communication applications. The enhanced bandwidth to 4GHz is also unique in that it facilitates stacked LNB applications to accommodate additional transponders containing enhanced DBS programming services (e.g., HDTV, local channels, etc.) over single-mode fiber for DBS television distribution in campus, fiber-to-the-premise (FTTx), and multiple dwelling unit (MDU) environments. The receiver is offered with 75 Ohm impedance using "F" connectors or 50 Ohms with SMA connectors. Optical connector options include SC/APC and FC/APC. The standard PIN-detector receiver offers high sensitivity for a maximum optical link budget. An optional APD detector increases optical sensitivity by 7dB. Built-in test points, LED indicators and alarms allow the receiver to be easily set up and maintained. The LP-OLAR Receiver is housed in a machined Aluminum enclosure that fits the standard LaserPlus chassis allowing up to 14 or 15 modules in a 3RU space. (The exact number is determined by the number of power supplies in the chassis, single or dual). All Specifications Subject to Change Without Notice 4 May 2011 Receiver Specifications Optical Characteristics (with SM 9/125m Fiber) Operating Wavelength Optical Input Power (PIN) Optical Input Power (APD) Optical Return Loss Optical Loss Budget (PIN) Optical Loss Budget (APD) Optical Connector (Standard) Optical Connector (Optional) Min 1290 -15 -22 Typ >55 7 13 Max Units 1610 nm +3 dBm -3 dBm dB 25 dB 32 dB SC/APC FC/APC Physical Characteristics Min Rx Weight Receiver Dimensions Typ Max Units 14.1 oz. 0.40 kg 4.5H x 1.125W x 8.75D in. 114H x 29W x 222D RF and System Characteristics Min Typ Max Units 10 4,000 MHz Any 500MHz / 1.5 Any 40MHz / 0.35 Return Loss 10 dB Output Impedance (Standard) 75 Ohms Output Impedance (Optional) 50 Ohms Link Gain -50 +30 dB Noise Figure (See manual) 10 45 dB Rx Output IP3 +12 dBm Rx Output P1dB -2 dBm Hi/Lo Gain Switch 0 +10 dB Hexadecimal Rotary Gain Switch 0 +15 dB Frequency Response Amplitude Flatness NOTES: 1) The RF gain changes 2dB for each 1dB of optical loss. 2) The receiver P1dB and IP3 is almost constant over the full RF gain range. 3) Noise figure is a complex variable that is influenced by the Tx and Rx attenuator settings as well as the optical loss. See the manual for detailed data. 4) The Hi/Lo Gain switch on the front panel changes the gain by +10dB. The hexadecimal rotary switch on the front panel changes the gain in 1dB steps. The "0" setting on the rotary switch is the lowest gain (0dB). The "F" setting on the rotary switch is the highest gain (+15dB). 5) Optical Loss Budget based on +10dBm transmitter launch power (DWDM DFB Laser). Rear and Side Views of the LP-OLAR LaserPlus Advanced L-Band Receiver Adv. L-Band Rx CNR with PIN & APD Ordering Information LP-OLAR-X4000-75-FA LP-OLAR-X4000-75-SA LP-OLAR-X4000-50-FA LP-OLAR-X4000-50-SA LP-OLAR-X4000S-75-FA LP-OLAR-X4000S-75-SA LP-OLAR-X4000S-50-FA LP-OLAR-X4000S-50-SA Rev X2 LaserPlus Advanced L-Band Receiver, 4GHz, PIN Detector, 75 Ohm F Connector, FC/APC LaserPlus Advanced L-Band Receiver, 4GHz, PIN Detector, 75 Ohm F Connector, SC/APC LaserPlus Advanced L-Band Receiver, 4GHz, PIN Detector, 50 Ohm SMA Connector, FC/APC LaserPlus Advanced L-Band Receiver, 4GHz, PIN Detector, 50 Ohm SMA Connector, SC/APC LaserPlus Advanced L-Band Receiver, 4GHz, APD Detector, 75 Ohm F Connector, FC/APC LaserPlus Advanced L-Band Receiver, 4GHz, APD Detector, 75 Ohm F Connector, SC/APC LaserPlus Advanced L-Band Receiver, 4GHz, APD Detector, 50 Ohm SMA Connector, FC/APC LaserPlus Advanced L-Band Receiver, 4GHz, APD Detector, 50 Ohm SMA Connector, SC/APC All Specifications Subject to Change Without Notice 4 May 2011