5KP36AT - Littelfuse, Inc.

Silicon Avalanche Diodes

298 www.littelfuse.com

FEATURES

• RoHS Compliant

• 5.0 to 220 Volts

• Glass passivated chip junction

• Uni-directional and Bi-directional

• 5000W Peak Pulse Power capability on 10/1000µs waveform

• Excellent clamping capability

• Repetition rate (duty cycle): 0.05%

• Low incremental surge resistance

•Fast response time: typically less than 1.0ps

from 0 Volts to BV

•Typical IR less than 1µA for VBR>=10V

•High temperature soldering guaranteed: 265˚C/10

seconds/.375"(9.5mm) lead length, 5lbs., (2.3kg) tension

Agency Approvals: Recognized under the Components

Program of Underwriters Laboratories.

Agency File Number: E128662

5KP CA

Voltage

Bi-Directional

5% Voltage Tolerance

Packaging Option

B = Bulk (500 pcs)

T = Tape and reeled (800 pcs)

ORDERING INFORMATION

5KP Series

5000 Watt Axial Leaded Transient Voltage Suppressor

MAXIMUM RATINGS AND CHARACTERISTICS @25˚C

AMBIENT TEMPERATURE (unless otherwise noted)

UNIT

Watts

Amps

Watts

Amps

°C

Notes:

1. Non-repetitive current pulse, per Fig.3 and derated above

TA= 25˚C per Fig.2

2. Mounted on Copper Pad area of 0.8x0.8"(20x20mm)

per Fig.5.

3. 8.3 ms single half sine-wave, or equivalent square wave,

Duty cycle= 4 pulses per minutes maximum.

SYMBOL

PPPM

IPPM

PM(AV)

IFSM

Tj, TSTG

VALUE

Min

5000

SEE

TABLE 1

400

-55 to +175

RATING

Peak Pulse Power Dissipation on

10/1000µs waveform(Note 1, FIG. 1)

Peak Pulse Current of on 10/1000µs

waveform (Note 1, FIG. 3)

Steady State Power Dissipation at

TL=75˚C, Lead lengths .375",

(9.5mm)(Note 2)

Peak Forward Surge Current, 8.3ms

Single Half Sine-Wave Superimposed

on Rated Load, (JEDEC Method)

(Note 3)

Operating junction and Storage

Temperature Range

The 5KP Series is designed specifically to protect sensitive

electronics equipment from voltage transients induced by

lightning and othertransient voltage events. These devices are

ideal for the protection of I/O interfaces, Vcc bus and other

vulnerable circuits used in automotive, industrial and consumer

electronic applications.

Mechanical Specifications:

Weight: 0.07 ounce, 2.1 gram

Case: Molded plastic over glass

passivated junction

Mounting Position: Any

Polarity: Color band denotes positive end

(cathode) except Bipolar

Terminal: Plated Axial leads, solderable per

MIL-STD-750, Method 2026

RoHS

Silicon Avalanche Diodes

299

www.littelfuse.com

SILICON DIODE

ARRAYS

5000 Watt Axial Leaded Transient Voltage Suppressor

Part

Numbers

Breakdown

Voltage

VBR (Volts) @ IT

Maximum

Reverse

Leakage

IR@ VR

(µA)

Maximum

Clamping

Voltage

VC@ IPP

(Volts)

Maximum

Peak Pulse

Current

IPP

(A)

ELECTRICAL SPECIFICATION @ Tamb 25°C

5KP5.0A 5KP5.0CA 5.0 6.40 7.00 50 9.2 544.0 5000

5KP6.0A 5KP6.0CA 6.0 6.67 7.37 50 10.3 486.0 5000

5KP6.5A 5KP6.5CA 6.5 7.22 7.98 50 11.2 447.0 2000

5KP7.0A 5KP7.0CA 7.0 7.78 8.60 50 12.0 417.0 1000

5KP7.5A 5KP7.5CA 7.5 8.33 9.21 5 12.9 388.0 250

5KP8.0A 5KP8.0CA 8.0 8.89 9.83 5 13.6 368.0 150

5KP8.5A 5KP8.5CA 8.5 9.44 10.40 5 14.4 348.0 50

5KP9.0A 5KP9.0CA 9.0 10.00 11.10 5 15.4 325.0 20

5KP10A 5KP10CA 10.0 11.10 12.30 5 17.0 295.0 15

5KP11A 5KP11CA 11.0 12.20 13.50 5 18.2 275.0 10

5KP12A 5KP12CA 12.0 13.30 14.70 5 19.9 252.0 10

5KP13A 5KP13CA 13.0 14.40 15.90 5 21.5 233.0 10

5KP14A 5KP14CA 14.0 15.60 17.20 5 23.2 216.0 10

5KP15A 5KP15CA 15.0 16.70 18.50 5 24.4 205.0 10

5KP16A 5KP16CA 16.0 17.80 19.70 5 26.0 193.0 10

5KP17A 5KP17CA 17.0 18.90 20.90 5 27.6 181.0 10

5KP18A 5KP18CA 18.0 20.00 22.10 5 29.2 172.0 10

5KP20A 5KP20CA 20.0 22.20 24.50 5 32.4 154.0 10

5KP22A 5KP22CA 22.0 24.00 26.90 5 35.5 141.0 10

5KP24A 5KP24CA 24.0 26.70 29.50 5 38.9 129.0 10

5KP26A 5KP26CA 26.0 28.90 31.90 5 42.1 119.0 10

5KP28A 5KP28CA 28.0 31.10 34.40 5 45.4 110.0 10

5KP30A 5KP30CA 30.0 33.30 36.80 5 48.4 103.0 10

5KP33A 5KP33CA 33.0 36.70 40.60 5 53.3 93.9 10

5KP36A 5KP36CA 36.0 40.00 44.20 5 58.1 86.1 10

5KP40A 5KP40CA 40.0 44.40 49.10 5 64.5 77.6 10

5KP43A 5KP43CA 43.0 47.80 52.80 5 69.4 72.1 10

5KP45A 5KP45CA 45.0 50.00 55.30 5 72.7 68.8 10

5KP48A 5KP48CA 48.0 53.30 58.90 5 77.4 64.7 10

5KP51A 5KP51CA 51.0 56.70 62.70 5 82.4 60.7 10

5KP54A 5KP54CA 54.0 60.00 66.30 5 87.1 57.5 10

5KP58A 5KP58CA 58.0 64.40 71.20 5 93.6 53.5 10

5KP60A 5KP60CA 60.0 66.70 73.70 5 96.8 51.7 10

5KP64A 5KP64CA 64.0 71.10 78.60 5 103.0 48.6 10

5KP70A 5KP70CA 70.0 77.80 86.00 5 113.0 44.3 10

5KP75A 5KP75CA 75.0 83.30 92.10 5 121.0 41.4 10

5KP78A 5KP78CA 78.0 86.70 95.80 5 126.0 39.7 10

5KP85A 5KP85CA 85.0 94.40 104.00 5 137.0 36.5 10

5KP90A 5KP90CA 90.0 100.00 111.00 5 146.0 34.3 10

5KP100A 5KP100CA 100.0 110.00 123.00 5 162.0 30.9 10

5KP110A 5KP110CA 110.0 122.00 135.00 5 177.0 28.3 10

5KP120A 5KP120CA 120.0 133.00 147.00 5 193.0 26.0 10

5KP130A 5KP130CA 130.0 144.00 159.00 5 209.0 24.0 10

5KP150A 5KP150CA 150.0 167.00 185.00 5 243.0 20.6 10

5KP160A 5KP160CA 160.0 178.00 197.00 5 259.0 19.3 10

5KP170A 5KP170CA 170.0 189.00 209.00 5 275.0 18.2 10

5KP180A 5KP180CA 180.0 200.00 221.00 5 292.0 17.6 10

5KP190A 5KP190CA 190.0 211.00 233.00 5 310.0 9.7 10

5KP200A 5KP200CA 200.0 222.00 246.00 5 329.2 9.1 10

5KP210A 5KP210CA 210.0 233.00 258.00 5 349.5 8.6 10

5KP220A 5KP220CA 220.0 244.00 270.00 5 371.1 8.1 10

Reverse

Stand off

Voltage

(Volts)

Test

Current

IT(mA)

For bidirectional type having Vrwm of 30 volts and less, the IR limit is double.

For parts without A , the VBR is + 10%

MIN MAX

Uni-Polar Bi-Polar

5KP Series

RoHS

Silicon Avalanche Diodes

300 www.littelfuse.com

5000 Watt Axial Leaded Transient Voltage Suppressor

Fig. 1 Peak Pulse Power Rating Curve

Fig. 2 Pulse Derating Curve

Fig. 3 Pulse Waveform Fig. 4- Typical Junction Capacitance

Fig. 6- Maximum Non-repetitive Forward

Surge Current

IFSM, Peak Forward Surge Current (A)

100

150

200

250

300

350

400

100101

Number of Cycles at 60HZ

Fig. 5 Steady State Power

Derating Curve

IPPM- Peak Pulse Current, % I RSM

100

150

1.0 2.0 3.0 4.0

tr=10µsec

Peak Value

IPPM

Half Value IPPM

TJ=25˚C

Pulse Width(td) is defined

as the point where the peak

current decays to 50% of IPPM

10/1000µsec. Waveform

as defined by R.E.A

t-Time (ms)

TL- Lead Temperature (˚C)

Steady State Power Dissipation (W)

025

50 75

100

125 150 175 200

L=0.375(9.5mm)

Lead Lengths

0.8x0.8x.040''

(20x20mm)

Copper Heat Sinks

60HZ

Resistive or 

Inductive Load

TA- Ambient Temperature (˚C)

Peak Pulse Power (KW)

100

125 150 175 200

CJ-Junction Capacitance (pF)

1000

100

10000

100000

10 100 200

Vbr, Breakdown Voltage

TJ=25˚C

f=1MH2

Vsig=50mVp-p

Measured at

Stand-off

Voltage

8.3ms Single

Half Sine-Wave

PPPM- Peak Pulse Power (kW)

0.1µs 1.0µs 10µs 100µs 1.0ms 10ms

0.1

100

td- Pulse Width (sec.)

Non-repetitive pulse

waveform shown in

Fig.3 TA=25˚C

Ratings and Characteristic Curves TA=25˚C unless otherwise noted

5KP Series

RoHS

Silicon Avalanche Diodes

301

www.littelfuse.com

SILICON DIODE

ARRAYS

Package Outline Dimensions

0.360 (9.1)

0.340 (8.6)

DIA.

1.0 (25.4)

MIN.

0.360 (9.1)

0.340 (8.6)

1.0 (25.4)

MIN.

0.052 (1.32)

0.048 (1.22)

DIA.

Case Style P600

Dimensions in inches and (millimeters)

5KP Series

RoHS

5000 Watt Axial Leaded Transient Voltage Suppressor