SBL3060PT - DIODES Incorporated

DS23018 Rev. 11 - 3

1 of 3

www.diodes.com

SBL3030PT - SBL3060PT

NOT RECOMMENDE D

FOR NEW DESIGN SBL3030PT - SBL3060PT

30A SCHOTTKY BARRIER RECTIFIER

Features

• Schottky Barrier Chip

• Guard Ring Die Construction for Transient Protect ion

• Low Power Loss, High Efficiency

• High Surge Capability

• High Current Capability and Low Forward Voltage Drop

• For Use in Low Voltage, High Frequency Inverters, Free

Wheeling, and Polarity Protection Application

• Lead Free Finish, RoHS Compliant (Note 3)

Mechanical Data

• Case: TO-3P

• Case Material: Molded Plastic. UL Flammability

Classification Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020C

• Terminals: Finish - Tin. Solderable per MIL-STD-202,

Method 208

• Polarity: As Marked on Body

• Ordering Information: See Page 3

• Marking: Type Number

• Weight: 5.6 grams (approximate)

TO-3P

Dim Min Max

A 1.88 2.08

B 4.87 5.13

C 21.25 21.75

D 19.60 20.10

E 2.10 2.40

G 0.51 0.76

H 15.75 16.25

J 1.93 2.18

K 2.90∅3.20∅

L 3.78 4.38

M 5.20 5.70

N 1.12 1.22

P 1.90 2.16

Q 2.93 3.22

R 11.70 12.80

S 4.40 Typical

All Dimensions in mm

Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic Symbol

SBL

3030PT SBL

3035PT SBL

3040PT SBL

3045PT SBL

3050PT SBL

3060PT Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage

VRRM

VRWM

VR 30 35 40 45 50 60 V

RMS Reverse Voltage VR

(

RMS

)

21 24.5 28 31.5 35 42 V

Average Rectified Output Current @ TC = 95°C

(Note 1) IO 30 A

Non-Repetitive Peak Forward Surge Current

8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 275 A

Forward Voltage Drop @ IF = 15A, TC = 25°C VFM 0.55 0.70 V

Peak Reverse Current @ TC = 25°C

at Rated DC Blocking Voltage @ TC = 100°C IRM 1.0

75 mA

Typical Total Capacitance (Note 2) CT 1100 pF

Typical Thermal Resistance Junction to Case (Note 1) R

Jc 2.0 °C/W

Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C

Notes: 1. Thermal resistance junction to case mounted on heatsink.

2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.

3. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.

DS23018 Rev. 11 - 3

2 of 3

www.diodes.com

SBL3030PT - SBL3060PT

NOT RECOMMENDE D

FOR NEW DESIGN

050 100

I, AVE

IED

(A)

(AV)

T , CASE TEMPERATURE (°C)

Fig. 1 Forward Derating Curve

150

0.1

1.0

100

0.2 0.4 0.6 0.8

I, INS

ANE

(A)

V , INST ANTANEOUS FORWARD VOLTAGE (V)

Fig. 2 Typical Fwd Characteristics per Element

SBL3030PT - SBL30450PT

SBL3050PT - SBL3060PT

100

150

200

250

300

110100

EAK

D S

(A)

FSM

NUMBER OF CYCLES A T 60 Hz

Fig. 3 Max Non-Repetitive Forward Surge Current

8.3 ms single half-sine-wave

100

1,000

4,000

0.1 1.0 10 100

, J

E (p

)

V , REVERSE VOLT AGE (V)

Fig. 4 T ypical Capacitance per Element

T = 25°C

f = 1MHz

0.01

0.1

1.0

100

I , INS

ANE

EVE

(A)

04080

PERCENT OF PEAK REVERSE VOLT AGE (%)

Fig. 5 Typical Reverse Characteristics per Element

120

DS23018 Rev. 11 - 3

3 of 3

www.diodes.com

SBL3030PT - SBL3060PT

NOT RECOMMENDE D

FOR NEW DESIGN

Ordering Information (Note 4)

Device Packaging Shipping

SBL3030PT TO-3P 30/Tube

SBL3035PT TO-3P 30/Tube

SBL3040PT TO-3P 30/Tube

SBL3045PT TO-3P 30/Tube

SBL3050PT TO-3P 30/Tube

SBL3060PT TO-3P 30/Tube

Notes: 4. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf.

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the

application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or

trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume

all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.

Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and

hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings

noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express

written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the

failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y

use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related

information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its

representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.