HEXFET® Power MOSFET
PD - 95178
lGeneration V Technology
lUltra Low On-Resistance
lDual P-Channel Mosfet
lSurface Mount
lAvailable in Tape & Reel
lDynamic dv/dt Rating
lFast Switching
Description
Fifth Generation HEXFETs from International Rectifier
utilize advanced processing techniques to achieve
the lowest possible on-resistance per silicon area.
This benefit, combined with the fast switching speed
and ruggedized device design that HEXFET Power
MOSFETs are well known for, provides the designer
with an extremely efficient device for use in a wide
variety of applications.
The SO-8 has been modified through a customized
leadframe for enhanced thermal characteristics and
multiple-die capability making it ideal in a variety of
power applications. With these improvements,
multiple devices can be used in an application with
dramatically reduced board space. The package is
designed for vapor phase, infra red, or wave soldering
techniques. Power dissipation of greater than 0.8W
is possible in a typical PCB mount application.
IRF7306PbF
SO-8
VDSS = -30V
RDS(on) = 0.10Ω
Parameter Max. Units
ID @ TA = 25°C 10 Sec. Pulsed Drain Current, VGS @ -10V -4.0
ID @ TA = 25°C Continuous Drain Current, VGS @ -10V -3.6
ID @ TA = 70°C Continuous Drain Current, VGS @ -10V -2.9
IDM Pulsed Drain Current -14
PD
@TA = 25°C Power Dissipation 2.0 W
Linear Derating Factor 0.016 W/°C
VGS Gate-to-Source Voltage ±20 V
dv/dt Peak Diode Recovery dv/dt -5.0 V/ns
TJ, TSTG Junction and Storage Temperature Range -55 to + 150 °C
Absolute Maximum Ratings
A
D1
D1
D2
D2
G1
S2
G2
S1
Top View
8
1
2
3
45
6
7
10/7/04
Thermal Resistance Ratings
Parameter Typ. Max. Units
RθJA Maximum Junction-to-Ambient 62.5 °C/W
lLead-Free
IRF7306PbF
Parameter Min. Typ. Max. Units Conditions
V(BR)DSS Drain-to-Source Breakdown Voltage -30 V VGS = 0V, ID = -250µA
∆V(BR)DSS/∆TJBreakdown Voltage Temp. Coefficient -0.037 V/°C Reference to 25°C, ID = -1mA
0.10 VGS = -10V, ID = -1.8A
0.16 VGS = -4.5V, ID = -1.5A
VGS(th) Gate Threshold Voltage -1.0 V VDS = VGS, ID = -250µA
gfs Forward Transconductance 2.5 S VDS = -24V, ID = -1.8A
-1.0 VDS = -24V, VGS = 0V
-25 VDS = -24V, VGS = 0V, TJ = 125°C
Gate-to-Source Forward Leakage -100 VGS = -20V
Gate-to-Source Reverse Leakage 100 VGS = 20V
QgTotal Gate Charge 25 ID = -1.8A
Qgs Gate-to-Source Charge 2.9 nC VDS = -24V
Qgd Gate-to-Drain ("Miller") Charge 9.0 VGS = -10V, See Fig. 6 and 12
td(on) Turn-On Delay Time 11 VDD = -15V
trRise Time 17 ID = -1.8A
td(off) Turn-Off Delay Time 25 RG = 6.0Ω
tfFall Time 18 RD = 8.2Ω, See Fig. 10
Between lead tip
and center of die contact
Ciss Input Capacitance 440 VGS = 0V
Coss Output Capacitance 200 pF VDS = -25V
Crss Reverse Transfer Capacitance 93 = 1.0MHz, See Fig. 5
Notes:
Parameter Min. Typ. Max. Units Conditions
ISContinuous Source Current MOSFET symbol
(Body Diode) showing the
ISM Pulsed Source Current integral reverse
(Body Diode) p-n junction diode.
VSD Diode Forward Voltage -1.0 V TJ = 25°C, IS = -1.8A, VGS = 0V
trr Reverse Recovery Time 53 80 ns TJ = 25°C, IF = -1.8A
Qrr Reverse RecoveryCharge 66 99 nC di/dt = 100A/µs
ton Forward Turn-On Time
Repetitive rating; pulse width limited by
max. junction temperature. ( See fig. 11 )
ISD ≤ -1.8A, di/dt ≤ 90A/µs, VDD ≤ V(BR)DSS,
TJ ≤150°C
Pulse width ≤ 300µs; duty cycle ≤ 2%.
Source-Drain Ratings and Characteristics
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
-14
-2.5
A
IGSS
IDSS Drain-to-Source Leakage Current
LSInternal Source Inductance 6.0
LDInternal Drain Inductance 4.0
nH
ns
nA
µA
Ω
RDS(ON) Static Drain-to-Source On-Resistance
S
D
G
S
D
G
Surface mounted on FR-4 board, t ≤ 10sec.
IRF7306PbF
Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance
Vs. Temperature
Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics
1
10
100
0.1 1 10 100
D
DS
A
-I , Drain-to-Source Current (A)
-V , Drain-to-Source Voltage (V)
VGS
TOP - 15V
- 10V
- 8.0V
- 7.0V
- 6.0V
- 5.5V
- 5.0V
BOTTOM - 4.5V
-4.5V
20µs PULSE WIDTH
T = 25°C
J
1
10
100
0.1 1 10 100
D
DS
20µs PULSE WIDTH
T = 150°C
A
-I , Drain-to-Source Current (A)
-V , Drain-to-Source Voltage (V)
VGS
TOP - 15V
- 10V
- 8.0V
- 7.0V
- 6.0V
- 5.5V
- 5.0V
BOTTOM - 4.5V
-4.5V
J
1
10
100
45678910
T = 25°C
T = 150°C
J
J
GS
D
A
-I , Drain-to-Source Current (A)
-V , Gate-to-Source Voltage (V)
V = -15V
20µs PULSE WIDTH
DS
0.0
0.5
1.0
1.5
2.0
-60 -40 -20 0 20 40 60 80 100 120 140 160
J
T , Junction Temperature (°C)
R , Drain-to-Source On Resistance
DS(on)
(Normalized)
A
V = -10V
GS
I = -3.0A
D
IRF7306PbF
Fig 7. Typical Source-Drain Diode
Forward Voltage
Fig 8. Maximum Safe Operating Area
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
0
200
400
600
800
1000
1 10 100
C, Capacitance (pF)
A
DS
-V , Drain-to-Source Voltage (V)
V = 0V, f = 1MHz
C = C + C , C SHORTED
C = C
C = C + C
GS
iss gs gd ds
rss gd
oss ds gd
C
iss
C
oss
C
rss
0
4
8
12
16
20
0 5 10 15 20 25
Q , Total Gate Charge (nC)
G
A
-V , Gate-to-Source Voltage (V)
GS
I = -3.0A
V = -24V
DS
D
FOR TEST CIRCUIT
SEE FIGURE 12
0.1
1
10
100
0.0 0.3 0.6 0.9 1.2 1.5
T = 25°C
T = 150°C
J
J
V = 0V
GS
SD
SD
A
-I , Reverse Drain Current (A)
-V , Source-to-Drain Voltage (V)
1
10
100
1 10 100
OPERATION IN THIS AREA LIMITED
BY RDS(on)
Single Pulse
T
T
= 150 C
= 25 C
°
°
J
C
-V , Drain-to-Source Voltage (V)
-I , Drain Current (A)I , Drain Current (A)
DS
D
100us
1ms
10ms
IRF7306PbF
Fig 10a. Switching Time Test Circuit
VDS
90%
10%
VGS
t
d(on)
t
r
t
d(off)
t
f
VDS
-10
V
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
Fig 9. Maximum Drain Current Vs.
Ambient Temperature
Fig 10b. Switching Time Waveforms
RD
VGS
VDD
RG
D.U.T.
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
+
-
0.1
1
10
100
0.0001 0.001 0.01 0.1 1 10 100
Notes:
1. Duty factor D = t / t
2. Peak T = P x Z + T
1 2
JDM thJA A
P
t
t
DM
1
2
t , Rectangular Pulse Duration (sec)
Thermal Response (Z )
1
thJA
0.01
0.02
0.05
0.10
0.20
D = 0.50
SINGLE PULSE
(THERMAL RESPONSE)
25 50 75 100 125 150
0.0
1.0
2.0
3.0
4.0
T , Case Temperature ( C)
-I , Drain Current (A)
°
C
D
IRF7306PbF
Fig 12a. Basic Gate Charge Waveform Fig 12b. Gate Charge Test Circuit
QG
QGS QGD
VG
Charge
-10 V
D.U.T. V
DS
I
D
I
G
-3mA
V
GS
.3µF
50KΩ
.2µF
12V
Current Regulator
Same Type as D.U.T.
Current Sampling Resistors
+
-
IRF7306PbF
P.W. Period
di/dt
Diode Recovery
dv/dt
Ripple ≤5%
Body Diode Forward Drop
Re-Applied
Voltage
Reverse
Recovery
Current
Body Diode Forward
Current
V
GS
=10V
V
DD
I
SD
Driver Gate Drive
D.U.T. I
SD
Waveform
D.U.T. V
DS
Waveform
Inductor Curent
D = P. W .
Period
+
-
+
+
+
-
-
-
RG
VDD
• dv/dt controlled by RG
• ISD controlled by Duty Factor "D"
• D.U.T. - Device Under Test
D.U.T Circuit Layout Considerations
• Low Stray Inductance
• Ground Plane
• Low Leakage Inductance
Current Transformer
* Reverse Polarity for P-Channel
** Use P-Channel Driver for P-Channel Measurements
*
VGS*
**
Peak Diode Recovery dv/dt Test Circuit
[ ]
[ ]
*** VGS = 5.0V for Logic Level and 3V Drive Devices
[ ] ***
Fig 13. For P-Channel HEXFETS
IRF7306PbF
SO-8 Package Outline
Dimensions are shown in milimeters (inches)
e1
D
E
y
b
A
A1
H
K
L
.189
.1497
0°
.013
.050 BASIC
.0532
.0040
.2284
.0099
.016
.1968
.1574
8°
.020
.0688
.0098
.2440
.0196
.050
4.80
3.80
0.33
1.35
0.10
5.80
0.25
0.40
0°
1.27 BAS I C
5.00
4.00
0.51
1.75
0.25
6.20
0.50
1.27
MIN MAX
MILLIMETERSINCHES
MIN MAX
DIM
8°
e
c .0075 .0098 0.19 0.25
.025 BASIC 0.635 BASIC
87
5
65
D B
E
A
e
6X
H
0.25 [.010] A
6
7
K x 45°
8X L 8X c
y
0.25 [.010] C A B
e1
A
A1
8X b
C
0.10 [.004]
4312
F OOT PR I NT
8X 0.72 [.028]
6.46 [.255]
3X 1.27 [.050]
4. OU T L INE CONF OR MS T O JE DE C OU T L INE MS - 012AA.
NOT ES :
1. DIMENS IONING & TOL ERANCING PE R AS ME Y14.5M-1994.
2. CONTROLLING DIMENS ION: MILL IME T ER
3. DIMENS IONS ARE SHOWN IN MILLIMETERS [INCHES ].
5 DIME NS ION DOES NOT INCL U DE MOLD PROT RU S IONS .
6 DIME NS ION DOES NOT INCL U DE MOLD PROT RU S IONS .
MOLD PROT RUSIONS NOT T O E XCEE D 0.25 [.010].
7 DIMENS ION IS THE LENGT H OF LEAD FOR SOLDERING T O
A SUBS T RATE.
MOLD PROT RUSIONS NOT T O E XCEE D 0.15 [.006].
8X 1.78 [.070]
SO-8 Part Marking Information (Lead-Free)
DAT E CODE (YWW)
XXXX
INTERNAT IONAL
RECT IFIER
LOGO
F 7101
Y = LAS T DIGIT OF T HE YE AR
PART NUMBER
LOT CODE
WW = WE E K
EXAMPLE: T HIS IS AN IRF7101 (MOSFET )
P = DE S I GNAT E S L E AD-F R E E
PRODUCT (OPTIONAL)
A = AS S E MB L Y S IT E CODE
IRF7306PbF
330.00
(12.992)
MAX.
14.40 ( .566 )
12.40 ( .488 )
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
FEED DIRECTION
TERMINAL NUMBER 1
12.3 ( .484 )
11.7 ( .461 )
8.1 ( .318 )
7.9 ( .312 )
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS(INCHES).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
SO-8 Tape and Reel
Dimensions are shown in milimeters (inches)
Data and specifications subject to change without notice.
This product has been designed and qualified for the Consumer market.
Qualifications Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.10/04
