CPH6434 Ordering number : ENA0443 SANYO Semiconductors DATA SHEET N-Channel Silicon MOSFET CPH6434 General-Purpose Switching Device Applications Features * * Ultrahigh-speed switching. 1.8V drive. Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Drain-to-Source Voltage VDSS 30 Gate-to-Source Voltage VGSS 10 V 6 A Drain Current (DC) ID V Drain Current (Pulse) IDP PW10s, duty cycle1% 24 A Allowable Power Dissipation PD Mounted on a ceramic board (900mm20.8mm) 1.6 W Channel Temperature Tch 150 C Storage Temperature Tstg --55 to +150 C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Symbol V(BR)DSS Conditions ID=1mA, VGS=0V VDS=30V, VGS=0V Ratings min typ Unit max 30 V 1 A 10 A Zero-Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current VGS=8V, VDS=0V VDS=10V, ID=1mA 0.4 Forward Transfer Admittance IGSS VGS(off) yfs VDS=10V, ID=3A 4.4 Static Drain-to-Source On-State Resistance RDS(on)1 RDS(on)2 ID=3A, VGS=4V ID=1.5A, VGS=2.5V Input Capacitance RDS(on)3 Ciss 790 pF 125 pF 110 pF Cutoff Voltage 1.3 7.4 V S 31 41 m 40 57 m 55 90 m Output Capacitance Coss ID=0.3A, VGS=1.8V VDS=10V, f=1MHz VDS=10V, f=1MHz Reverse Transfer Capacitance Crss VDS=10V, f=1MHz Turn-ON Delay Time td(on) tr See specified Test Circuit. 16.5 ns See specified Test Circuit. 78 ns td(off) tf See specified Test Circuit. 77 ns See specified Test Circuit. 125 ns Rise Time Turn-OFF Delay Time Fall Time Marking : ZL Continued on next page. Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 82306 / 62006PE MS IM TB-00002101 No. A0443-1/4 CPH6434 Continued from preceding page. Parameter Symbol Ratings Conditions min typ Unit max Total Gate Charge Qg nC Qgs VDS=10V, VGS=4V, ID=6A VDS=10V, VGS=4V, ID=6A 7.0 Gate-to-Source Charge 1.8 nC Gate-to-Drain "Miller" Charge Qgd VDS=10V, VGS=4V, ID=6A 1.9 Diode Forward Voltage VSD IS=6A, VGS=0V Package Dimensions unit : mm 7018A-003 0.6 ID=3A RL=5 VIN 4 0.2 D VOUT PW=10s D.C.1% 0.05 1.6 2.8 V VDD=15V 4V 0V 0.15 2.9 5 1.2 Switching Time Test Circuit VIN 6 nC 0.86 G 2 0.95 3 1 : Drain 2 : Drain 3 : Gate 4 : Source 5 : Drain 6 : Drain 0.4 0.9 0.2 0.6 1 CPH6434 P.G 50 S SANYO : CPH6 ID -- VDS V V VDS=10V 9 5 8 2 6 5 4 3 2 1 1 0 0 0 0.2 0.4 0.6 0.8 Drain-to-Source Voltage, VDS -- V 0 1.0 0.5 1.0 1.5 2.0 Gate-to-Source Voltage, VGS -- V IT11180 RDS(on) -- VGS 140 2.5 IT11181 RDS(on) -- Ta 100 Ta=25C Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m --25C 3 7 25C VGS=1.5V Ta= 75 C 4 Drain Current, ID -- A 8.0V Drain Current, ID -- A ID -- VGS 10 1.8 2.0 4.0V 2.5V 6.0V 6 120 1.5A 100 ID=0.3A 80 3.0A 60 40 20 0 0 2 4 6 Gate-to-Source Voltage, VGS -- V 10 IT11241 80 V .3A, I D=0 60 =1.8 V GS =2.5V VGS .5A, 1 = ID =4.0V A, V GS .0 3 = ID 40 20 0 --60 --40 --20 0 20 40 60 80 100 Ambient Temperature, Ta -- C 120 140 160 IT11183 No. A0443-2/4 CPH6434 yfs -- ID 10 7 5 C -25 =a T C 75 3 2 25 C 1.0 7 5 3 3 2 1.0 7 5 3 2 0.1 7 5 3 2 2 0.1 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT11184 Drain Current, ID -- A 0 3 Ciss, Coss, Crss -- pF td(off) tf 5 tr 3 td(on) 2 3 5 7 2 1.0 3 5 1000 Ciss 7 5 3 2 Coss Crss 3 2 3.0 2.5 2.0 1.5 1.0 10 7 5 1 2 3 4 5 6 Total Gate Charge, Qg -- nC 7 IT11188 PD -- Ta 1.8 10 15 20 25 ASO 10s 10 0 1m s s 10 m s 10 0m s ID=6A DC op era tio 1.0 7 5 n( Ta = 25 Operation in this area is limited by RDS(on). 3 2 0.1 7 5 30 IT11187 IDP=24A 3 2 3 2 0.5 5 Drain-to-Source Voltage, VDS -- V 5 0 Allowable Power Dissipation, PD -- W 0 10 IT11186 Drain Current, ID -- A Gate-to-Source Voltage, VGS -- V 7 VGS -- Qg 0 1.2 IT11185 5 2 VDS=10V ID=6A 3.5 1.0 100 Drain Current, ID -- A 4.0 0.8 f=1MHz 7 10 0.1 0.6 2 2 7 0.4 Ciss, Coss, Crss -- VDS 3 VDD=15V VGS=4V 100 0.2 Diode Forward Voltage, VSD -- V SW Time -- ID 5 Switching Time, SW Time -- ns VGS=0V Ta=7 5C 25C --25C 2 IS -- VSD 10 7 5 VDS=10V Source Current, IS -- A Forward Transfer Admittance, yfs -- S 3 C ) Ta=25C Single pulse Mounted on a ceramic board (900mm20.8mm) 0.01 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Drain-to-Source Voltage, VDS -- V 2 3 5 IT11189 1.6 M ou nt 1.4 1.2 ed on ac er 1.0 am ic bo ar 0.8 d (9 00 m 0.6 m2 0. 8m 0.4 m ) 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT11190 No. A0443-3/4 CPH6434 Note on usage : Since the CPH6434 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2006. Specifications and information herein are subject to change without notice. PS No. A0443-4/4