MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA, U.S.A. 92253 Tel: 760-564-8656 • Fax: 760-564-2414
15KP SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-17.0 TO 220 Volts
15000 Watt Peak Pulse Power
FEATURES
• Plastic package has Underwriters Laborator
y
P-600
Flammability Classification 94V-0
• Glass passivated junction
• 15000W Peak Pulse Powe
r
capability on 10/1000 µs waveform
• Excellent clamping capability 1.0(25.4) MIN
• Repetition rate (duty cycle):0.05
%
.360(9.1)
• Low incremental surge resistance .340(8.6)
• Fast response time: typically less DIA .360(9.1)
than 1.0 ps from 0 volts to BV .340(8.6)
• Typical Id less than 1µA above 10V
• High temperature soldering guaranteed:
265°C/10 seconds/.375", (9.5mm) lead
length, 5lbs., (2.3kg) tension .052(1.3) 1.0(25.4) MIN
.048(1.2)
DIA
MECHANICAL DATA
Case:Molded plastic over glass passivated junction
Terminals: Plated Axial leads, solderable per Dimensions in inches (milimeters)
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.07 ounce, 2.1 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types 15KP17 thru types 15KP22
0
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTIC
S
Ratings at 25°C ambient temperature unless otherwise specified.
RATING SYMBOL
V
ALUE UNITS
Peak Pulse Power Dissipation on 10/1000 µs Pppm Minimum 15000 Watts
waveform (NOTE 1)
Peak Pulse Current of on 10-1000 µs waveform Ippm SEE TABLE 1
A
mps
(NOTE 1)
Steady State Power Dissipation at Tl=75 °C Pm(AV) 8.0 Watts
Lead Lengths.375", (9.5mm)(NOTE 2)
Peak Forward Surge Current, 8.3ms Sine-Wav
e
Superimposed on Rated Load, (JEDEC Method) IFSM 400.0
A
mps
(NOTE 3)
Operatings and Storage Temperature Range Tj, Tstg -55 to +175 °C
NOTES:
1.Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2.Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.
3.8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per
minutes maximum.
8/6/2002
50
100
tf= 10µs
Peak Value Ipp
Half Value Ipp/2
td
0
1
023
Ippm - Peak Pulse Current - % of Ipp
Pulse Width (td) is Defined as the
Ta=25ºC
Point Where the Peak Current
Decays to 50% of Ipp
FIG. 2 PULSE WAVE FORM
t-Time - ms10/1000µsec Waveform
as Defined by R.E.A.
0.1
110100
1,00010,000
t- Pulse Duration - µsec
100,000
1
10
100
1,000
Pppm - Peak Pulse Power - Kilowatts
d
FIG. 1 PEAK PULSE POWER RATING CURVE
15KP
RATING AND CHARACTISTICS CURVES 15KP SERIES
78-150 Calle Tampico, Unit 210 La Quinta, CA U.S.A. 92253 Tel: 760-564-8656 Fax: 760-564-2414
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
MDE Semiconductor, Inc.
8/06/2002
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA, USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414
15000 Watt TVS
UNI-
DIRECTIONAL
PART
NUMBER
REVERSE
STANDOFF
VOLTAGE
VRWM (V)
BREAKDOWN
VOLTAGE
VBR (V)
MIN. @ IT
TEST
CURRENT
(It)
mA
MAXIMUM
CLAMPING
VOLTAGE
@Ipp Vc (V)
PEAK
PULSE
CURRENT
Ipp (A)
REVERSE
LEAKAGE
@ VRWM
IR (µA)
15KP17 17 18.90 50 32.3 464.0 5000
15KP17A 17 18.90 50 29.3 512.0 5000
15KP18 18 20.00 50 34.2 429.0 5000
15KP18A 18 20.00 50 30.9 485.0 5000
15KP20 20 22.20 20 37.9 396.0 1500
15KP20A 20 22.20 20 34.3 437.0 1500
15KP22 22 24.40 10 41.1 365.0 500
15KP22A 22 24.40 10 37.1 404.0 500
15KP24 24 26.70 5 45.0 333.0 150
15KP24A 24 26.70 5 40.7 369.0 150
15KP26 26 28.90 5 48.7 308.0 50
15KP26A 26 28.90 5 44.0 341.0 50
15KP28 28 31.10 5 52.4 286.0 25
15KP28A 28 31.10 5 48.5 316.0 25
15KP30 30 33.30 5 56.2 267.0 15
15KP30A 30 33.30 5 50.7 296.0 15
15KP33 33 36.70 5 60.6 248.0 10
15KP33A 33 36.70 5 54.8 374.0 10
15KP36 36 40.00 5 66.0 227.0 10
15KP36A 36 40.00 5 59.7 251.0 10
15KP40 40 44.40 5 72.8 206.0 10
15KP40A 40 44.40 5 65.8 228.0 10
15KP43 43 47.80 5 77.1 195.0 10
15KP43A 43 47.80 5 69.1 215.0 10
15KP45 45 50.00 5 60.7 186.0 10
15KP45A 45 50.00 5 73.0 205.0 10
15KP48 48 53.30 5 85.9 175.0 10
15KP48A 48 53.30 5 77.7 193.0 10
15KP51 51 56.70 5 91.5 164.0 10
15KP51A 51 56.70 5 92.8 181.0 10
15KP54A 54 60.00 5 96.8 155.0 10
15KP54A 54 60.00 5 87.5 171.0 10
15KP58 58 64.40 5 104.0 144.0 10
15KP58A 58 64.40 5 94.0 160.0 10
15KP60 60 66.70 5 107.0 140.0 10
15KP60A 60 66.70 5 97.3 154.0 10
15KP64 64 71.10 5 115.0 130.0 10
15KP64A 64 71.10 5 104.0 144.0 10
15KP70 70 77.80 5 126.0 119.0 10
15KP70A 70 77.80 5 114.0 132.0 10
15KP75 75 83.30 5 135.0 111.0 10
15KP75A 75 83.30 5 122.0 123.0 10
15KP78 78 86.70 5 140.0 107.0 10
15KP78A 78 86.70 5 126.0 119.0 10
8/6/2002
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA, USA 92253 Tel: 760-564-8656 • Fax: 760-564-2414
15000 Watt TVS
UNI-
DIRECTIONAL
PART
NUMBER
REVERSE
STANDOFF
VOLTAGE
VRWM (V)
BREAKDOWN
VOLTAGE
VBR (V)
MIN. @ IT
TEST
CURRENT
(It)
mA
MAXIMUM
CLAMPING
VOLTAGE
@Ipp Vc (V)
PEAK
PULSE
CURRENT
Ipp (A)
REVERSE
LEAKAGE
@ VRWM
IR (µA)
15KP85 85 94.40 5 152.0 99.0 10
15KP85A 85 94.40 5 137.0 109.0 10
15KP90 90 100.00 5 160.0 94.0 10
15KP90A 90 100.00 5 146.0 103.0 10
15KP100 100 111.00 5 179.0 94.0 10
15KP100A 100 111.00 5 162.0 93.0 10
15KP110 110 122.00 5 196.0 77.0 10
15KP110A 110 122.00 5 178.0 84.0 10
15KP130 130 144.00 5 231.0 65.0 10
15KP130A 130 144.00 5 209.0 72.0 10
15KP150 150 167.00 5 268.0 56.0 10
15KP150A 150 167.00 5 243.0 62.0 10
15KP160 160 178.00 5 287.0 52.0 10
15KP160A 160 178.00 5 259.0 56.0 10
15KP170 170 189.00 5 304.0 49.0 10
15KP170A 170 189.00 5 275.0 55.0 10
15KP180 180 200.00 5 321.0 47.0 10
15KP180A 180 200.00 5 291.0 52.0 10
15KP200 200 222.00 5 356.0 42.0 10
15KP200A 200 222.00 5 322.0 47.0 10
15KP220 220 245.00 5 393.0 36.0 10
15KP220A 220 245.00 5 356.0 42.0 10
15KP240 240 267.00 5 428.0 35.0 10
15KP240A 240 267.00 5 388.0 39.0 10
15KP260 260 289.00 5 464.0 32.0 10
15KP260A 260 289.00 5 419.0 36.0 10
15KP280 280 311.00 5 500.0 30.0 10
15KP280A 280 311.00 5 452.0 33.0 10
For Bidirectional type having Vrwm of 10volts and less, the IR limit is double.
8/6/2002
