SURFACE MOUNT CRYSTAL OSCILLATOR QSMO - 4200 SERIES Hy-Q International 7.5 3 4 3 5.0 2.0 2.0 4 O21 2.6 MARKING 120.0 1 2 2 1 17.5 2.0 TYP. 1.4 TYP. 1.3 See Note 2 1.8 O80 5.08 PAD CONNECTIONS PAD 1: E/D O255 2.0 TYP. PAD 2: GROUND 4.2 PAD 3: OUT PAD 4: VDD O13 SUGGESTED PAD LAYOUT O1.5 TYP. 4.0 TYP. INFRARED RAYS REFLOW 10 SEC 245C 200C 16.0 7.9 1 to 5C/SEC 200 SEC 100C 1 to 9C/SEC 8.0 TYP. PREHEAT 0C MARKING TEMPERATURE 1 to 5C/SEC 1.75 2.5 5.4 TYP. 60 SEC FEEDING CARRIER TAPE AND REEL DIMENSIONS TIME (SECONDS) SPECIFICATION QSMO-4210_(1) SERIES NUMBER NOMINAL FREQUENCY QSMO-4230_(1) 1.8 to 170 MHz OVERALL FREQUENCY STABILITY (1) (Max) A = 25ppm B = 50ppm C = 100ppm x = Custom (See Note 1) OPERATING TEMPERATURE RANGE -10C to +70C STORAGE TEMPERATURE RANGE -50C to +125C SUPPLY VOLTAGE SUPPLY CURRENT (Max) +5.0V 10% 1.8 ~ 32MHz 12mA >32 ~ 50MHz 16.5mA >50 ~ 67MHz 18mA >67 ~ 125MHz 40mA >125 ~ 170MHz 50mA 1.8 ~ 32MHz 18mA >32 ~ 67MHz 50mA >67 ~ 125MHz 80mA >125 ~ 170MHz 90mA AT '0' LEVEL AT PIN 1 STAND BY CURRENT 10A "0" Level (Max) "1" Level (Min) OUTPUT VOLTAGE OUTPUT LOAD (Max) +3.3V 10% 0.33 VOLTS 2.97 VOLTS 10LS TTL / 15pF TTL Load / CMOS Load OUTPUT CURRENT (Max) RISE/FALL TIMES (Max) SYMMETRY (Max) 0.5 VOLTS 4.5 VOLTS "0" Level "1" Level (AT 0.1 VDD ~ 0.9VDD) (AT 0.5 VDD) 2mA 2mA 6nSEC (< 80MHz) 4nSEC (80MHz +) 1.8 ~ 50MHz 50 ~ 67MHz START-UP TIME (Max) 5nSEC (< 80MHz) 4nSEC (80MHz +) 45/55% 40/60% 45/55% 10mSEC TRI-STATE CONTROL VIH (OUTPUT ENABLED) VOH (OUTPUT HIGH IMPEDANCE) 2.0 V MAX 0.8 V MIN Note (1): Customer to add 'A' or 'B' or 'C' for Overall Frequency Stability (or 'x' for custom requirement. Please consult our Technical Department). Note (2): Height of 1.05mm is optionally available REF.No. 1012-0058-00-03 15 JULY 2002 Hy-Q International (Australia) Pty. Ltd. ALL DIMENSIONS AND TOLERANCES ARE IN mm Telephone +61 (03) 9562 8222 SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE Facsimile +61 (03) 9562 9009 E-Mail sales@hy-q.com.au