REF.No. 1012-0058-00-03 15 JULY 2002 ALL DIMENSIONS AND TOLERANCES ARE IN mm SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE
Hy-Q International
SURFACE MOUNT CRYSTAL OSCILLATOR
QSMO - 4200 SERIES
MARKING
SUGGESTED PAD LAYOUT
PAD CONNECTIONS
SPECIFICATION
SERIES NUMBER
NOMINAL FREQUENCY
OVERALL FREQUENCY STABILITY (Max)
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
SUPPLY VOLTAGE
SUPPLY CURRENT (Max)
OUTPUT VOLTAGE
RISE/FALL TIMES (Max) (AT 0.1 V ~ 0.9V )
SYMMETRY (Max) (AT 0.5 V )
START-UP TIME (Max)
STAND BY CURRENT AT ’0’ LEVEL AT PIN 1
QSMO-4210_ QSMO-4230_
1.8 to 170 MHz
A = ±25ppm B = ±50ppm C = ±100ppm x = Custom
-10˚C to +70˚C
+3.3V ±10% +5.0V ±10%
VOH (OUTPUT HIGH IMPEDANCE)
TRI-STATE CONTROL VIH (OUTPUT ENABLED) 0.8 V MIN
2.0 V MAX
-50˚C to +125˚C
1.8 ~ 32MHz 12mA
>32 ~ 50MHz 16.5mA
>50 ~ 67MHz 18mA
10µA
0.33 VOLTS
2.97 VOLTS 0.5 VOLTS
4.5 VOLTS
6nSEC (< 80MHz)
4nSEC (80MHz +)
FEEDING
CARRIER TAPE AND REEL DIMENSIONS
MARKING
12
3
434
21
TEMPERATURE
INFRARED RAYS REFLOW
1 to 9˚C/SEC
10 SEC
PREHEAT
60 SEC
0˚C
TIME (SECONDS)
1 to 5˚C/SEC
100˚C
200˚C
200 SEC
1 to 5˚C/SEC
245˚C
1.8 ~ 50MHz 45/55%
50 ~ 67MHz 40/60% 45/55%
DD
10mSEC
OUTPUT LOAD (Max) 10LS TTL / 15pF
PAD 1: E/D
PAD 2: GROUND
PAD 3: OUT
PAD 4:
Hy-Q International (Australia) Pty. Ltd.
Telephone +61 (03) 9562 8222 Facsimile +61 (03) 9562 9009 E-Mail sales@hy-q.com.au
V
DD
2.5
Ø1.5 TYP. 4.0 TYP. 1.75
16.0
7.9
8.0 TYP.
120.0˚
2.0 TYP.
Ø21
Ø13
2.0 2.0
17.5
Ø80 Ø255
2.6
5.08
4.2
2.0 TYP.
(See Note 1)
Note (1): Customer to add ’A’ or ’B’ or ’C’ for Overall Frequency Stability (or ’x’ for custom requirement. Please consult our Technical Department).
>67 ~ 125MHz 40mA
>125 ~ 170MHz 50mA >125 ~ 170MHz 90mA
>67 ~ 125MHz 80mA
>32 ~ 67MHz 50mA
1.8 ~ 32MHz 18mA
(1)(1)
(1)
DDDD
5nSEC (< 80MHz)
4nSEC (80MHz +)
OUTPUT CURRENT (Max) "0" Level
"1" Level 2mA
2mA
"0" Level (Max)
"1" Level (Min)
1.4 TYP.
1.8
See Note 2
Note (2): Height of 1.05mm is optionally available
TTL Load / CMOS Load
5.0
7.5 1.3
5.4 TYP.
