S8VS-48024B-F - Omron Automation and Safety

Switch Mode Power Supply S8VS B-5

Power

supplies

Switch Mode Power Supply

S8VS

15/30-W Models

Compact, Thin Power Supplies That Mount

Just About Anywhere to Contribute to

Control Panel Downsizing

• Compact, thin size: 22.5 × 85 × 96.5 mm (W × H × D).

• Three mounting directions

(standard, horizontal, facing horizontal).

• Mounting directly onto the panel is possible.

• Safety standards:

UL508/60950-1/1604, CSA C22.2 No. 14/60950-1/213,

EN50178 (= VDE0160), EN60950-1 (= VDE0805).

60/90/120/180/240-W Models

New Models with Total Run Time Monitor in

Addition to Models with Maintenance

Forecast Monitor

• Compact size: 40 × 95 mm (W × H) (60-W Models).

• Status displayed on 3-digit, 7-segment display.

• Safety standards:

UL508/60950, CSA C22.2 No. 14/60950,

EN50178 (= VDE0160), EN60950 (= VDE0805).

Features Common to All Models

• Mount to DIN-rail.

• Lead-free solder.

B-6 Switch Mode Power Supply S8VS

Model Number Structure

■Model Number Legend

Ordering Information

Note: 1. The output capacity of the S8VS-01505 is 10 W.

2. The output capacity of the S8VS-03005 is 20 W.

S8VS- @@@@@@@

1. Power Ratings

015: 15 W

030: 30 W

060: 60 W

090: 90 W

120: 120 W

180: 180 W

240: 240 W

2. Output voltage

05: 5 V

12: 12 V

24: 24 V

3. Configuration

15-W, 30-W Models

None: Standard

60-W Models

None: Standard

A: With maintenance forecast monitor

B: With total run time monitor

90-W, 120-W, 180-W, 240-W Models

None: Standard

A: With maintenance forecast monitor

and undervoltage alarm

(transistor (sinking))

B: With total run time monitor and un-

dervoltage alarm

(transistor (sinking))

AP: With maintenance forecast monitor

and undervoltage alarm

(transistor (sourcing))

BP: With total run time monitor and un-

dervoltage alarm

(transistor (sourcing))

Power ratings Input Voltage Output voltage Output current Alarm output Model number

15 W 100 to 240 VAC 5 V 2.0 A --- S8VS-01505 (See note 1.)

12 V 1.2 A S8VS-01512

24 V 0.65 A S8VS-01524

30 W 5 V 4.0 A --- S8VS-03005 (See note 2.)

12 V 2.5 A S8VS-03012

24 V 1.3 A S8VS-03024

60 W 24 V 2.5 A --- S8VS-06024

S8VS-06024A

S8VS-06024B

90 W 3.75 A --- S8VS-09024

Sinking S8VS-09024A

Sourcing S8VS-09024AP

Sinking S8VS-09024B

Sourcing S8VS-09024BP

120 W 5 A --- S8VS-12024

Sinking S8VS-12024A

Sourcing S8VS-12024AP

Sinking S8VS-12024B

Sourcing S8VS-12024BP

180 W 7.5 A --- S8VS-18024

Sinking S8VS-18024A

Sourcing S8VS-18024AP

Sinking S8VS-18024B

Sourcing S8VS-18024BP

240 W 10 A --- S8VS-24024

Sinking S8VS-24024A

Sourcing S8VS-24024AP

Sinking S8VS-24024B

Sourcing S8VS-24024BP

Switch Mode Power Supply S8VS B-7

Power

supplies

Specifications

■Ratings/Characteristics

Note: 1. Refer to the Engineering Data section on page B-21 for details.

2. If the V.ADJ adjuster is turned, the voltage will increase by more than +15% of the voltage adjustment range. When adjusting the output voltage, confirm the actual output voltage from

the Power Supply and be sure that the load is not damaged.

3. The overvoltage protection of the S8VS-015@@ uses a zener diode clamp. If the internal feedback circuit is destroyed by any chance, the load may be destroyed by the clamped output

voltage (approx. 140% to 190% of the rated output voltage).

4. To reset the protection, turn OFF the power supply for three minutes or longer and then turn the power supply back ON.

5. The typical values indicate the values for an input condition of 230 VAC. All items are measured at a frequency of 50 Hz.

6. The inrush current circuits do not differ for voltage specifications. Therefore, the typical values are the data values for 24-V models.

7. The circuit forms are different, so the start up time is shorter only when using a 15-W power rating.

Power ratings 15 W 30 W

Type

Item

Standard Standard

Efficiency (typical) 5-V models 72% min. (76% typ.) 70% min. (76% typ.)

12-V models 74% min. (79% typ.) 76% min. (83% typ.)

24-V models 77% min. (81% typ.) 80% min. (85% typ.)

Input Voltage 100 to 240 VAC (85 to 264 VAC)

Frequency 50/60 Hz (47 to 450 Hz)

Current 100 V input 0.45 A max. 0.9 A max.

200 V input 0.25 A max. 0.6 A max.

230 V input 5 V: (0.14 A typ.), 12 V/24 V (0.19 A typ.) 5 V: (0.27 A typ.), 12 V/24 V (0.37 A typ.)

Power factor ---

Harmonic current emissions Conforms to EN61000-3-2

Leakage current 100 V input 0.5 mA max.

200 V input 1.0 mA max.

230 V input 5 V/12 V/24 V: (0.30 mA typ.) 5 V/12 V/24 V:(0.32 mA typ.)

Inrush current

(See note 1.) 100 V input 25 A max. (20 A typ.) (for a cold start at 25°C)

200 V input 50 A max. (40 A typ.) (for a cold start at 25°C)

230 V input 5 V/12 V/24 V: (29 A typ.) (See note 6.) 5 V/12 V/24 V: (40 A typ.) (See note 6.)

Output Voltage adjustment range

(See note 2.) −10% to 15% (with V.ADJ) (guaranteed)

Ripple 2.0% (p-p) max. (at rated input/output voltage)

f=20MHz measuring 5 V: (0.70%(p-p) typ.), 12 V:(0.48%(p-p) typ.), 24 V:(0.25%(p-p)

typ.) 5 V: (0.70%(p-p) typ.), 12 V:(0.52%(p-p) typ.), 24 V:(0.19%(p-p)

typ.)

f=100MHz measuring 5 V: (0.86%(p-p) typ.), 12 V:(0.56%(p-p) typ.), 24 V:(0.32%(p-p)

typ.) 5 V: (0.80%(p-p) typ.), 12 V:(0.58%(p-p) typ.), 24 V:(0.21%(p-p)

typ.)

Input variation influence 0.5% max. (at 85 to 264 VAC input, 100% load)

Load variation influence (rated input voltage) 2.0% max. (5 V), 1.5% max. (12 V, 24 V), (with rated input, 0 to 100% load)

Temperature variation influence 0.05%/°C max.

Start up time (See note 1 and 7.) 100 ms max. (at rated input/output voltage) 1,000 ms max. (at rated input/output voltage)

5 V: (6 ms typ.), 12 V: (12 ms typ.), 24 V: (18 ms typ.) 5 V/12 V/24 V: (240 ms typ.)

Hold time (See note 1.) 20 ms min. (at rated input/output voltage)

at 100% load 5 V: (328 ms typ.), 12V: (251 ms typ.), 24 V: (243 ms typ.) 5 V: (299 ms typ.), 12 V: (217 ms typ.), 24 V: (210 ms typ.)

Additional

functions Overload protection (See note 1.) 105% to 160% of rated load current, voltage drop, automatic re-

set 105% to 160% of rated load current, voltage drop, intermittent

operation, automatic reset

Overvoltage protection (See note 1.) Yes (a zener diode clamp) (See note 3.) Yes (See note 4.)

Output voltage indication No

Output current indication No

Peak-hold current indication No

Maintenance forecast monitor indication No

Maintenance forecast monitor output No

Total run time monitor indication No

Total run time monitor output No

Undervoltage alarm indication Yes (color: red)

Undervoltage alarm output No

Parallel operation No

Series operation Models with 24-V output: Possible for up to 2 Power Supplies (with external diode)

Models with 5- or 12-V output: Not possible

Other Operating ambient temperature Refer to the derating curve in Engineering Data. (with no icing or condensation)

Storage temperature −25 to 65°C

Operating ambient humidity 25% to 85% (Storage humidity: 25% to 90%)

Dielectric strength 3.0 kVAC for 1 min. (between all inputs and outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)

1.0 kVAC for 1 min. (between all outputs and PE terminals; detection current: 20 mA)

Insulation resistance 100 MΩ min. (between all outputs and all inputs/ PE terminals) at 500 VDC

Vibration resistance 10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions

10 to 150 Hz, 0.35-mm single amplitude (5 G max.) for 80 min. each in X, Y, and Z directions

Shock resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions

Output indicator Yes (color: green)

EMI Conducted

Emissions Conforms to EN61204-3 EN55011 Class B and based on FCC Class A

Radiated

Emissions Conforms to EN61204-3 EN55011 Class B

EMS Conforms to EN61204-3 high severity levels

Approved standards UL: UL508 (Listing, Class 2: Per UL1310), UL60950-1, UL1604 (Class I/Division2)

cUL: CSA C22.2 No.14 (Class 2), No.60950-1, No.213 (Class I/Division2)

EN/VDE: EN50178 (=VDE0160), EN60950-1 (=VDE0805)

SELV (EN60950/EN50178/UL60950-1)

According to VDE0106/P100, IP20

Weight 160 g max. 180 g max.

B-8 Switch Mode Power Supply S8VS

Specifications

■Ratings/Characteristics

Note: 1. Refer to the Engineering Data section on page B-21 for details.

2. If the V.ADJ adjuster is turned, the voltage will increase by more than +15% of the voltage adjustment range (by more than +10% for 240-W models). When adjusting the output voltage,

confirm the actual output voltage from the Power Supply and be sure that the load is not damaged.

3. To reset the protection, turn OFF the power supply for three minutes or longer and then turn the power supply back ON.

4. Displayed on 7-segment LED. (character height: 8 mm)

5. Resolution of output voltage indication: 0.1 V, Precision of output voltage indication: ±2% (percentage of output voltage value, ±1 digit)

6. Resolution of output current indication: 0.1 A; Precision of output current indication: ±5% F.S. ±1 digit max. (specified by rated output voltage)

7. Resolution of peak-hold current indication: 0.1 A; Precision of peak-hold current indication: ±5% F.S. ±1 digit max. (specified by rated output voltage);

Signal width required for peak-hold current: 20 ms

8. A Type and B Type: Sinking, AP Type and P Type: Sourcing

9. To ensure the emission rating, a ferrite ring core should be used in all cabling (TDK HF60T, HF70RH or equivalent model).

10. The typical values indicate the values for an input condition of 230 VAC. All items are measured at a frequency of 50 Hz.

Power ratings 60 W 90 W

Type

Item

Standard Maintenance

forecast monitor Total run time

monitor Standard Maintenance

forecast monitor Total run time

monitor

Efficiency (typical) 78% min. (86% typ.) 80% min. (87% typ.)

Input Voltage 100 to 240 VAC (85 to 264 VAC)

Frequency 50/60 Hz (47 to 450 Hz)

Current 100 V input 1.7 A max. 2.3 A max.

200 V input 1.0 A max. 1.4 A max.

230 V input (0.7 A typ.) (0.9 A typ.)

Power factor ---

Harmonic current emissions Conforms to EN61000-3-2

Leakage current 100 V input 0.5 mA max.

200 V input 1.0 mA max.

230 V input (0.40 mA typ.) (0.35 mA typ.)

Inrush current

(See note 1.) 100 V input 25 A max. (for a cold start at 25°C)

200 V input 50 A max. (for a cold start at 25°C)

230 V input (47 A typ.) (38 A typ.)

Output Voltage adjustment range (See note 2.) −10% to 15% (with V.ADJ) (guaranteed)

Ripple 2.0% (p-p) max. (at rated input/output voltage)

f=20MHz measuring (0.29% (p-p) typ.) (0.38% (p-p) typ.)

f=100MHz measuring (0.32% (p-p) typ.) (0.42% (p-p) typ.)

Input variation influence 0.5% max. (at 85 to 264 VAC input, 100% load)

Load variation influence (rated input voltage) 1.5% max. (with rated input, 0 to 100% load)

Temperature variation influence 0.05%/°C max.

Start up time (See note 1.) 1,000 ms max. (at rated input/output voltage)

(270 ms typ.) (260 ms typ.)

Hold time (See note 1.) 20 ms min. (at rated input/output voltage)

at 100% load (220 ms typ.) (190 ms typ.)

Additional

functions Overload protection (See note 1.) 105% to 160% of rated load current, voltage drop, intermittent, automatic reset

Overvoltage protection (See notes 1 and 3.) Yes

Output voltage indication (See note 4.) No Yes (selectable) (See note 5.) No Yes (selectable) (See note 5.)

Output current indication (See note 4.) No Yes (selectable) (See note 6.) No Yes (selectable) (See note 6.)

Peak-hold current indication (See note 4.) No Yes (selectable) (See note 7.) No Yes (selectable) (See note 7.)

Maintenance forecast monitor indication (See note 4.) No Yes (selectable) No No Yes (selectable) No

Maintenance forecast monitor output No Yes (open collector out-

put), 30 VDC max., 50

mA max. (See note 8.)

Total run time monitor indication (See note 4.) No Yes (selectable) No Yes (selectable)

Total run time monitor output No Yes (open collector out-

put), 30 VDC max., 50

mA max. (See note 8.)

Undervoltage alarm indication (See note 4.) No Yes (selectable) No Yes (selectable)

Undervoltage alarm output terminals No Yes (open collector output)

30 VDC max., 50 mA max. (See note 8.)

Parallel operation No

Series operation Yes for up to 2 Power Supplies (with external diode)

Other Operating ambient temperature Refer to the derating curve in Engineering Data. (with no icing or condensation)

Storage temperature −25 to 65°C

Operating ambient humidity 25% to 85% (Storage humidity: 25% to 90%)

Dielectric strength 3.0 kVAC for 1 min. (between all inputs and outputs/ alarm outputs; detection current: 20 mA)

2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA)

1.0 kVAC for 1 min. (between all outputs/ alarm outputs and PE terminals; detection current: 20 mA)

500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)

Insulation resistance 100 MΩ min. (between all outputs/ alarm outputs and all inputs/ PE terminals) at 500 VDC

Vibration resistance 10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions

10 to 150Hz, 0.35-mm single amplitude (5 G max.) for 80 min each in-X, Y, and Z directions

Shock resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions

Output indicator Yes (color: green)

EMI Conducted

Emissions Conforms to EN61204-3 EN55011 Class A and based on FCC Class A

Conforms to EN61204-3 EN55011 Class B (See note 9.)

Radiated

Emissions Conforms to EN61204-3 EN55011 Class A

Conforms to EN61204-3 EN55011 Class B (See note 9.)

EMS Conforms to EN61204-3 high severity levels

Approved standards UL: UL508 (Listing, Class 2: Per UL1310), UL60950

cUL: CSA C22.2 No.14 (Class 2), No.60950

EN/VDE: EN50178 (=VDE0160), EN60950 (=VDE0805)

SELV (EN60950/EN50178/UL60950-1)

According to VDE0106/P100, IP20

UL: UL508 (Listing), UL60950

cUL: CSA C22.2 No.14, No.60950

EN/VDE: EN50178 (=VDE0160), EN60950 (=VDE0805)

SELV (EN60950/EN50178/UL60950-1)

According to VDE0106/P100, IP20

Weight 330 g max. 490 g max.

Switch Mode Power Supply S8VS B-9

Power

supplies

Power ratings 120 W 180 W 240 W

Type

Item

Standard Maintenanc

e forecast

monitor

Total run

time

monitor

Standard Maintenanc

e forecast

monitor

Total run

time

monitor

Standard Maintenanc

e forecast

monitor

Total run

time

monitor

Efficiency (typical) 80% min. (87% typ.) 80% min. (88% typ.) 80% min. (86% typ.)

Input Voltage 100 to 240 VAC (85 to 264 VAC)

Frequency 50/60 Hz (47 to 63 Hz)

Current 100 V input 1.9 A max. 2.9 A max. 3.8 A max.

200 V input 1.1 A max. 1.6 A max. 2.0 A max.

230 V input (0.6 A typ.) (0.9 A typ.) (1.2 A typ.)

Power factor 0.95 min.

Harmonic current emissions Conforms to EN61000-3-2

Leakage current 100 V input 0.5 mA max.

200 V input 1.0 mA max.

230 V input (0.43 mA typ.) (0.45 mA typ.) (0.45 mA typ.)

Inrush current

(See note 1.) 100 V input 25 A max. (for a cold start at 25°C)

200 V input 50 A max. (for a cold start at 25°C)

230 V input (41 mA typ.) (34 mA typ.) (39 mA typ.)

Output Voltage adjustment range (See note 2.) −10% to 15% (with V.ADJ) (guaranteed) ±10% (with V.ADJ) (guaranteed)

Ripple 2.0% (p-p) max. (at rated input/output voltage)

f=20MHz measuring (0.66%(p-p) typ.) (0.45%(p-p) typ.) (0.13%(p-p) typ.)

f=100MHz measuring (0.67%(p-p) typ.) (0.52%(p-p) typ.) (0.21%(p-p) typ.)

Input variation influence 0.5% max. (at 85 to 264 VAC input, 100% load)

Load variation influence (rated input voltage) 1.5% max. (with rated input, 0 to 100% load)

Temperature variation influence 0.05%/°C max.

Start up time (See note 1.) 1,000 ms max. (at rated input/output voltage)

(380 ms typ.) (530 ms typ.) (780 ms typ.)

Hold time (See note 1.) 20 ms min. (at rated input/output voltage)

at 100% load (60 ms typ.) (60 ms typ.) (30 ms typ.)

Addition-

al func-

tions

Overload protection (See note 1.) 105% to 160% of rated load current, voltage drop, intermittent, automatic reset 105% to 160% of rated load

current, voltage drop, auto-

matic reset

Overvoltage protection (See notes 1 and 3.) Yes

Output voltage indication (See note 4.) No Yes (selectable)

(See note 5.) No Yes (selectable)

(See note 5.)

Output current indication (See note 4.) No Yes (selectable)

(See note 6.) No Yes (selectable)

(See note 6.)

Peak-hold current indication (See note 4.) No Yes (selectable)

(See note 7.) No Yes (selectable) (See note

7.) No Yes (selectable)

(See note 7.)

Maintenance forecast monitor indication

(See note 4.) No Yes

(selectable) No No Yes

(selectable) No

Maintenance forecast monitor output No Yes

(open collec-

tor output),

30 VDC

max., 50 mA

max.

(See note 8.)

No No Yes

(open collec-

tor output),

30 VDC

max., 50 mA

max.

(See note 8.)

No No Yes

(open collec-

tor output),

30 VDC

max., 50 mA

max.

(See note 8.)

Total run time monitor indication

(See note 4.) No Yes

(selectable) No Yes

(selectable)

Total run time monitor output No Yes (open

collector out-

put), 30 VDC

max., 50 mA

max.

(See note 8.)

No Yes (open

collector out-

put), 30 VDC

max., 50 mA

max.

(See note 8.)

No Yes (open

collector out-

put), 30 VDC

max., 50 mA

max.

(See note 8.)

Undervoltage alarm indication (See note 4.) No Yes (selectable) No Yes (selectable) No Yes (selectable)

Undervoltage alarm output terminals No Yes (open collector output),

30 VDC max., 50 mA max.

(See note 8.)

No Yes (open collector output),