F-219 SOLC-150-02-F-Q-A SOLC-135-02-L-Q-LC SOLC-125-02-L-Q-LC (1.27 mm) .050" SOLC SERIES QUAD ROW SMT SOCKET (1.27 mm) .050" Mates with: TOLC SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?SOLC (1.27 mm) .050" Insulator Material: Black Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au over 50 " (1.27 m) Ni Current Rating: 2.4 A per pin (6 adjacent pins powered) Operating Temp Range: -55 C to +125 C Insertion Depth: (1.68 mm) .066" to (3.61 mm) .142" with (0.38 mm) .015" wipe Normal Force: 75 grams (0.74 N) average Max Cycles: 100+ RoHS Compliant: Yes Drop-in replacement for FOLC/MOLC when mated with TOLC Optional locking clips and alignment pins Surface mount PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (05-35) (0.15 mm) .006" max (40-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) SOLC PLATING OPTION 02 05, 10, 15, 20, 25, 30, 35, 40, 45, 50 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality (2.54) .100 -A = Alignment Pin (N/A with -LC) -L = Locking Clip (N/A with -A) (Manual placement required) A1 B1 -LC -K = (7.00 mm) .276" DIA Polyimide film Pick & Place Pad (1.27) .050 TYP D1 C1 * For Micro Rugged, see the MOLC/FOLC pages located in the Tiger EyeTM section. OPTION -F = 10 " (0.25 m) Gold on contact, Gold flash on tail (0.635) .025 (6.35) .250 OTHER SOLUTIONS Q = Gold flash on contact, Gold flash on tail (Standard sizes) FILE NO. E111594 -P = Pick & Place Pad ALSO AVAILABLE No. of positions x (1.27).050 + (0.51) .020 (1.02) .040 TYP (2) (MOQ Required) -TR = Tape & Reel (4.06) (4.62) .160 .182 (0.25) .010 (2.54) .100 * Other sizes * Other platings (7.11) .280 (1.40) .055 (0.76) .030 Note: Some sizes, styles and options are non-standard, non-returnable. NO. PINS PER ROW 1 (1.27) .050 (0.89) .035 -A OPTION (4.93) .194 (1.42) .056 -P OPTION -LC OPTION Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.