General Purpose Power Transistor Description: Plastic, PNP, TO-220 power transistor General purpose amplifier and switching applications Absolute Maximum Ratings Parameter Symbol Rating Collector-Emitter Voltage VCEO 100 Collector-Base Voltage VCBO 115 Emitter-Base Voltage VEBO 5 Continuous Collector Current IC 2 A Base Current = IB Total Device Dissipation at Tc = +25C Derate above +25C = 0.24mW/C PD 36 W Tj, Tstg -65 to +150 C Operating and Storage Junction Temperature Range Unit V Electrical Characteristics (TA = 25C unless otherwise specified) Parameter Symbol Test Conditions Min. Max. Unit Collector - Emitter Breakdown Voltage V(BR)CEO IC=30mA, IB=0 Note 1 100 - V Collector - Base Breakdown Voltage V(BR)CBO IC=1mA, IE=0 115 - V Emitter - Base Breakdown Voltage V(BR)EBO IC=1mA, IE=0 5 - V ICBO VCB=60V, IB=0 - 0.2 ICES VCE=100V, VBE=0 - 0.3 IEBO VEB=5V, IC=0 - 1 OFF Characteristics Collector Cut-Off Current Emitter Cut-Off Current mA www.element14.com www.farnell.com www.newark.com Page <1> 06/06/14 V1.1 General Purpose Power Transistor Electrical Characteristics (TA = 25C unless otherwise specified) ON Characteristics (Note 1) DC Current Gain hFE VCE=4V, IC=0.2A 15 - - VCE=4V, IC=1A 40 - - - 0.7 Collector - Emitter Saturation Voltage VCE(sat) IC=1A, IB=0.2A Base - Emitter On Voltage VBE(on) IC=1A, VCE=4V Current Gain-Bandwidth Product fT VCE=10V, IC=0.2A, f=1MHz 3 - MHz Small-Signal Current Gain hfe VCE=10V, IC=0.2A, f=1MHz 20 - - V 1.3 Small-Signal Characteristics Note 1. Pulse Test: Pulse Width %300s, Duty Cycle %2%. Pin Configuration: 1. Base 2. Collector 3. Emitter Dimensions Min. Max. A 14.42 16.51 B 9.63 10.67 C 3.56 4.83 D - 0.9 E 1.15 1.4 F 3.75 3.88 G 2.29 2.79 H 2.54 3.43 J - 0.56 K 12.7 14.73 L 2.8 4.07 M 2.03 2.92 N - 31.24 O 7 Dimensions : Millimetres Part Number Table Description Part Number Transistor, Plastic, PNP, 2A, 100V, TO-220 BD240C Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 06/06/14 V1.1