THIRD ANGLE PROJ.
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
CAD FILE REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE:
#.015 (0,381 mm) #.005 (0,127 mm)
3 PLACE DECIMAL2 PLACE DECIMAL ANGLES
# 1$
0.310 REF
0.250 REF. 0.223 REF.
0.990 REF.
0.311 REF.
0.18
0.02
0.28
0.140+0.015
-0
0.450+0.015
-0
0.090+0
-0.010
0.100#0.010
0.250+0.015
-0
-- RELEASE TO MFG. ------ ------ ------
L REDRAWN IN PRO-E & ADDED COD 9/20/13 49679 AAP
L
B
REFERENCE
DOR 21-902-315567
ST5M1289 ST5M132
ST5M1290-001S
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way be related to
or disclosed by said drawings, specifications, or other data.
SHEET 2 OF 2
SCALE: 6.0:1.08/28/13 K. CAPOZZI
TITLE
JACK - TRIAX
FOR TIMES
AA2325 CABLE
DATEAPPROVED
Amphenol RF
www.amphenolrf.com
DATE
14-Nov-91
ENGINEER
F.S.HULL
MATERIAL
SEE NOTES
DATE
08-Aug-13
DRAWN
A ARUN PRABU
FINISH
DRAWING NO. 902-5019-2
ITEM NO. 902-5019-2
PART NO. 902-5019-2
NOTES:
1. MATERIALS AND FINISHES (PLATING THICKNESS IN MICROINCHES):
OUTER & INNER FERRULE - COPPER, BRIGHT ACID TIN (200 MIN THICK)
OUTER & INNER BODIES - BeCu, GOLD PLATING (50 MIN THICK)
CONTACT - BeCu, GOLD PLATING (50 MIN THICK)
OUTER & INNER INSULATOR - PTFE
WASHER - PTFE
2. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOL, 902-5019-2 , AND DATE CODE"
3. SHOWS CABLE ENTRY DIMENSIONS.
OUTER FERRULE
OUTER FERRULE INNER FERRULE
TEFLON
WASHER
INNER BODY OUTER BODY
CONTACT
SCALE 2.000
CABLE PER ST5M1323
(TIMES AA2325)
STEP 1
STEP 2
INNER
CONDUCTOR
OUTER
CONDUCTOR
INTERLAYER
(DIELECTRIC)
CABLE SHIELD FOLDED
BACK OVER JACKET
CONNECTOR ASSEMBLY PROCEDURE:
1. STRIP CABLE AS SHOWN.SLIDE OUTER FERRULE WELL UP
OVER OUTER JACKET PRIOR TO FOLDING BACK CABLE SHIELD.
2. A. SLIDE TEFLON WASHER OVER INNER CONDUCTOR OF CABLE,
FLUSH WITH INNER DIELECTRIC.
B. CRIMP INNER CONTACT TO CENTER CONDUCTOR OF CABLE,USING
AMPHENOL TOOL FRAME 227-944 WITH 227-954 DIE SET 'C'
GROOVE (0.034 DIAMOND).
3. SLIDE INNER FERRULE OVER OUTER CONDUCTOR AND 'INTERLAYER'.
4. FLARE OUTER CONDUCTOR SLIGHTLY AND INSERT INNER CONTACT INTO INNER BODY TO A
FIRM BUTT.OUTER CONDUCTOR MUST GO OUTSIDE BACK END OF INNER BODY,SLIDE INNER FERRULE
FORWARD OVER BRAID AND BUTT SHOULDER OF INNER BODY.CRIMP FERRULE USING AMPHENOL TOOL
FRAME 227-944 WITH 227-954 DIE SET 'B' GROOVE (0.178 HEX).
5. ASSEMBLE INNER BODY INTO OUTER BODY TO A FIRM BUTT,FOLD CABLE SHIELD
FORWARD OVER BODY.SLIDE OUTER FERRULE FORWARD OVER BRAID AND BUTT SHOULDER OF BODY.
CRIMP FERRULE USING AMPHENOL TOOL FRAME 227-944 WITH 227-954 DIE SET 'A' GROOVE (0.263 HEX).
AFTER ASSEMBLY DIMENSIONS
SCALE 3.000
